×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

LUS Light-Capacity U-Shaped Hanger with Double-Shear Nailing

Face-Mount Hangers for Solid Sawn Lumber

This product's information may differ depending on the category of use. You are currently viewing details related to Face-Mount Hangers for Solid Sawn Lumber. You can also view product information related to the category: Face-Mount Hangers for Plated Truss

The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.

Key Features

  • Cannot be modified
  • Works for a wide range of applications
  • Features speed prongs used to temporarily position and secure the connector for easier and faster installation
  • LUS-series hangers are tested, load rated and code compliant

Material

  • See tables

Finish

  • Galvanized. Some products available in stainless steel or ZMAX® coating. See Corrosion Information.

Installation

  • Use all specified fasteners; see General Notes.
  • Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
  • Not designed for welded or nailer applications.
  • With 3x carrying members: when 0.162" x 3 1/2" nails are specified, use 0.162" x 2 1/2" nails into the header and 0.162" x 3 1/2" nails into the joist with no load reduction. When 0.148" x 3" nails are specified, use 0.148" x 2 1/2" nails into the header and 0.148" x 3" nails into the joist with no load reduction.
  • With 2x carrying members: when 0.162" x 3 1/2" nails are specified, use 0.148" x 1 1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.64 of the table values. When 0.148" x 3" nails are specified, use 0.148" x 1 1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.77 of the table values. See Fastener Design Information.

Related Literature

High Wind Guide
F-C-HWG23
A comprehensive guide to help designers select the most appropriate connections for high-wind regions.
Product Guide
Conectores para la construcción con madera 2021–2023
C-C-2021SP
El catálogo incluye información sobre nuevos productos, así como especificaciones e instrucciones de instalación aplicables para conectores estructurales de madera a madera y de madera a concreto.
Catalog
Wood Construction Connectors – Canadian Limit States Design
C-C-CAN2022
A complete product and application catalogue including load tables and installation information for wood-to-wood, wood-to-concrete and wood-to-masonry connectors.
Catalog
Connecteurs pour constructions en bois — Conception aux états limites canadiens
C-C-CAN2022CF
Un catalogue complet sur les produits et les applications, y compris de l’information sur l’installation et les tableaux de charge pour les connecteurs bois-à-bois, bois-à-béton et bois-à-maçonnerie.
Catalog
Wood Construction Connectors 2024-2025
C-C-2024
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Installer's Pocket Guide
S-C-INSTALL22
A bilingual pocket installation guide for connectors.
Product Guide
Deck Connection and Fastening Guide
F-DECKCODE22
A guide to deck building and for retrofitting safer, longer-lasting outdoor decks, with 2018 and 2021 IRC/IBC code-compliant solutions for using the latest anchors, connectors and fasteners.
Product Guide
Do Your Decks Meet Code?
DIY-DECKPATIO23
A tearpad showing deck connections on one side and patio cover system connections on the other.
Flier
A Complete Connector System for Building Decks
DIY-DCKPTIOCA23
A tearpad for Canada showing on one side the hardware needed for a deck system, and on the other side the hardware needed for a patio cover system.
Flier
Un système de connexion complet pour la construction de terrasses
DIY-DCKPTOCA23F
Un étui à deux faces pour le Canada présentant le matériel nécessaire pour un système de terrasse et un système d’abri de terrasse. Des recommandations de produits plus récentes sont incluses.
Flier
Strong-Tie DIY - Projects for a strong and beautiful home
S-HOMEPRJCTS18
A booklet featuring practical and attractive DIY projects for home and yard using Simpson Strong-Tie® connectors and fasteners, including Outdoor Accents®.
Flier
Strong-Tie DIY - Proyectos para una casa resistente y hermosa
S-HOMPRJCTS18SP
Un catálogo con proyectos prácticos y atractivos DIY para el hogar y el patio que utilizan conectores y sujetadores Simpson Strong-Tie® y accesorios Outdoor Accents®.
Flier
Plated Truss Connectors Installation Guide
WC-C-PTBI23
A wall chart for plated truss connectors in English and Spanish.
Installation Guide
Allowable Loads for Joist Hangers with Gaps
T-C-HANGERGAP24
A technical bulletin explaining how allowable loads for joist and truss hangers are affected by gaps between the end of the carried member and the face of the carrying member.
Technical Bulletin
Allowable Loads for Reduced Truss Heel Heights
T-C-REDHEEL22
A technical bulletin providing information for selecting hangers for a truss-to-truss connection including technical information, illustrations and tables.
Technical Bulletin
Connection Solutions to Meet the DCA6 Prescriptive Residential Wood Deck Construction Guide
T-C-DCA6DECK21
A technical bulletin providing Simpson Strong-Tie connector, fastener and anchor solutions to meet the DCA6 provisions of the 2015 IRC for single-level, residential wood decks.
Technical Bulletin
LUL/LUS/HUS/HGUS - 10-d x 1 1/2" (N10) Option Standard and Double Shear Face Mount Joist Hangers
T-C-N10TRSSCN22
A technical bulletin featuring updated load tables of standard and double-shear face-mount joist hangers commonly used in Canadian truss construction.
Technical Bulletin
LUS Installed with 10dx1 1/2" Nails
L-C-LUSREPAIR23
Repair of LUS Joist Hangers Installed with 10dx1 1/2" Nails.
Engineering Letter
Reinforcement for LUS Joist Hangers Using Strong-Drive® SDWC TRUSS Screws
L-LUSSDWC24
This letter provides adjustment factors to be applied for two common LUS joist hangers installed with 0.148"x1½" nails and reinforced with 4½"-long Simpson Strong-Tie® Strong-Drive® SDWC Truss screws.
Engineering Letter

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Ga. W (in.) H (in.) B (in.) Coating/Material Packaging Qty.
LUS210 18 1 9/16 7 13/16 1 3/4 Zinc Galvanized, G90 1
LUS210-2 18 3 1/8 9 2 Zinc Galvanized, G90 1
LUS210-2SS 18 3 1/8 9 2 Stainless Steel 1
LUS210-2Z 18 3 1/8 9 2 ZMAX® 1
LUS210-3 18 4 5/8 8 3/16 2 Zinc Galvanized, G90 1
LUS210-3Z 18 4 5/8 8 3/16 2 ZMAX® 1
LUS210SS 18 1 9/16 7 13/16 1 3/4 Stainless Steel 1
LUS210Z 18 1 9/16 7 13/16 1 3/4 ZMAX® 1
LUS214-2 18 3 1/8 10 15/16 2 Zinc Galvanized, G90 1
LUS24 18 1 9/16 3 1/8 1 3/4 Zinc Galvanized, G90 1
LUS24-2 18 3 1/8 3 1/8 2 Zinc Galvanized, G90 1
LUS24Z 18 1 9/16 3 1/8 1 3/4 ZMAX® 1
LUS26 18 1 9/16 4 3/4 1 3/4 Zinc Galvanized, G90 1
LUS26-2 18 3 1/8 4 7/8 2 Zinc Galvanized, G90 1
LUS26-2SS 18 3 1/8 4 7/8 2 Stainless Steel 1
LUS26-2Z 18 3 1/8 4 7/8 2 ZMAX® 1
LUS26-3 18 4 5/8 4 1/8 2 Zinc Galvanized, G90 1
LUS26SS 18 1 9/16 4 3/4 1 3/4 Stainless Steel 1
LUS26Z 18 1 9/16 4 3/4 1 3/4 ZMAX® 1
LUS28 18 1 9/16 6 5/8 1 3/4 Zinc Galvanized, G90 1
LUS28-2 18 3 1/8 7 2 Zinc Galvanized, G90 1
LUS28-2SS 18 3 1/8 7 2 Stainless Steel 1
LUS28-2Z 18 3 1/8 7 2 ZMAX® 1
LUS28-3 18 4 5/8 6 1/4 2 Zinc Galvanized, G90 1
LUS28-3Z 18 4 5/8 6 1/4 2 ZMAX® 1
LUS28SS 18 1 9/16 6 5/8 1 3/4 Stainless Steel 1
LUS28Z 18 1 9/16 6 5/8 1 3/4 ZMAX® 1
LUS310 18 2 9/16 7 1/4 2 Zinc Galvanized, G90 1
LUS36 18 2 9/16 5 1/4 2 Zinc Galvanized, G90 1
LUS36SS 18 2 9/16 5 1/4 2 Stainless Steel 1
LUS36Z 18 2 9/16 5 1/4 2 ZMAX® 1
LUS410 18 3 9/16 8 3/4 2 Zinc Galvanized, G90 1
LUS410Z 18 3 9/16 8 3/4 2 ZMAX® 1
LUS414 18 3 9/16 10 3/4 2 Zinc Galvanized, G90 1
LUS414Z 18 3 9/16 10 3/4 2 ZMAX® 1
LUS44 18 3 9/16 3 2 Zinc Galvanized, G90 1
LUS44Z 18 3 9/16 3 2 ZMAX® 1
LUS46 18 3 9/16 4 3/4 2 Zinc Galvanized, G90 1
LUS46Z 18 3 9/16 4 3/4 2 ZMAX® 1
LUS48 18 3 9/16 6 3/4 2 Zinc Galvanized, G90 1
LUS48Z 18 3 9/16 6 3/4 2 ZMAX® 1

Load Tables

Load Values with Stainless-Steel Nails

Stainless-Steel LUS Hangers with Smooth-Shank Stainless-Steel Nails
Model No. Fasteners DF/SP Allowable Loads SPF/HF Allowable Loads
Header Joist Uplift(160) Floor (100) Snow (115) Roof (125) Uplift(160) Floor (100) Snow (115) Roof (125)
  1. NAILS: SS10d = 0.148" dia. X 3" long. SS16d = 0.162" dia. X 3 1/2" long. See other nail sizes and information.
LUS26SS 4-SS10d 4-SS10d 915 865 990 1070 805 740 845 915
LUS26-2SS 4-SS16d 4-SS16d 955 1030 1180 1280 955 880 1010 1090
LUS28SS 6-SS10d 4-SS10d 915 1100 1255 1360 805 940 1075 1165
LUS28-2SS 6-SS16d 4-SS16d 955 1315 1500 1625 955 1125 1285 1390
LUS210SS 8-SS10d 4-SS10d 960 1340 1525 1650 750 1145 1305 1415
LUS210-2SS 8-SS16d 6-SS16d 1595 1830 2090 2265 1235 1565 1785 1935
Stainless-Steel LUS Hangers with Simpson Strong-Tie® Ring-Shank Stainless-Steel Nails
Model No. Fasteners DF/SP Allowable Loads SPF/HF Allowable Loads
Header Joist Uplift(160) Floor (100) Snow (115) Roof (125) Uplift(160) Floor (100) Snow (115) Roof (125)
  1. NAILS: SSA10d = 0.148" dia. X 3" long. SSA16d = 0.162" dia. X 3 1/2" long. See other nail sizes and information.
LUS26SS 4-SSA10d 4-SSA10d 1165 865 990 1070 1005 740 845 915
LUS26-2SS 4-SSA16d 4-SSA16d 1165 1030 1180 1280 1000 880 1010 1090
LUS28SS 6-SSA10d 4-SSA10d 1165 1100 1255 1360 1005 940 1075 1165
LUS28-2SS 6-SSA16d 4-SSA16d 1165 1315 1500 1625 1000 1125 1285 1390
LUS210SS 8-SSA10d 4-SSA10d 1165 1340 1525 1650 1005 1145 1305 1415
LUS210-2SS 8-SSA16d 6-SSA16d 1745 1830 2090 2265 1500 1565 1785 1935

Load Values with Strong-Drive® SD Connector Screws

Allowable Loads for LUS Model Hangers with SD Screws
Model No. Fasteners DF/SP Allowable Loads (lbs) SPF/HF Allowable Loads (lbs)
Header Joist Uplift (160) Floor (100) Snow (115) Roof (125) Uplift (160) Floor (100) Snow (115) Roof (125)
LUS24 (4) SD9112 (2) SD9212 495 870 1000 1085 425 605 695 755
LUS26 (4) SD9112 (4) SD9212 1180 1055 1210 1315 1015 760 875 950
LUS28 (6) SD9112 (4) SD9212 1335 1395 1570 1570 1130 985 1135 1230
LUS210 (8) SD9112 (4) SD9212 1240 1735 1995 2170 1065 1210 1390 1510
LUS24-2 (4) SD9112 (2) SD9212 495 870 1000 1085 425 590 680 740
LUS26-2 (4) SD9112 (4) SD9212 1180 1055 1210 1315 1015 735 845 920
LUS28-2 (6) SD9112 (4) SD9212 1335 1395 1570 1570 1100 960 1105 1200
LUS210-2 (8) SD9112 (6) SD9212 1240 1920 2210 2400 1065 1325 1525 1660
LUS214-2 (10) SD9112 (6) SD9212 1995 2265 2605 2830 1645 1550 1785 1940
LUS26-3 (4) SD9112 (4) SD9212 1180 1055 1210 1315 1015 735 845 920
LUS28-3 (6) SD9112 (4) SD9212 1335 1395 1570 1570 1100 960 1105 1200
LUS210-3 (8) SD9112 (6) SD9212 1240 1735 1995 2170 1065 1185 1360 1480
LUS36 (4) SD9112 (4) SD9212 1180 1055 1210 1315 1015 735 845 920
LUS310 (6) SD9112 (4) SD9212 1240 1395 1570 1570 1065 960 1105 1200
LUS44 (4) SD9112 (2) SD9212 495 870 1000 1085 425 590 680 740
LUS46 (4) SD9112 (4) SD9212 1180 1055 1210 1315 1015 735 845 920
LUS48 (6) SD9112 (4) SD9212 1335 1395 1570 1570 1100 960 1105 1200
LUS410 (8) SD9112 (6) SD9212 1240 1920 2210 2400 1065 1325 1525 1660
LUS414 (10) SD9112 (6) SD9212 1995 2265 2605 2830 1645 1550 1785 1940

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products

HGUS™
HGUS™
Heavy Girder Hanger with Double-Shear Nailing
HHUS
HHUS
Extra-Heavy U-Shaped Hanger with Double-Shear Nailing
HUS
HUS
Heavy U-Shaped Hanger with Double-Shear Nailing
MUS
MUS
Hanger