×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

HHRC™ Hip-Ridge Face-Mount Connector

Hip Connectors

This product's information may differ depending on the category of use. You are currently viewing details related to Hip Connectors. You can also view product information related to the category: Misc. Connectors for Engineered Wood

The HHRC attaches hip beams to the end of a ridge beam. It takes the inconsistency out of this common detail and assigns a standard load capacity. The HHRC can be placed higher or lower on the ridge beam so the hips are flush at the top.

Key Features

  • Strong-Drive® SD Connector screws included

Material

  • 12 gauge

Finish

  • Galvanized

Installation

  • Use all specified fasteners (included); see General Notes

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Application Member Size Ga. W1 (in.) W2 (in.) Coating/Material Packaging Qty.
HHRC2-2 Solid Sawn Lumber Ridge (2) 2x – Hip (2) 2x 12 3 1/8 3 1/8 Zinc Galvanized, G90 1
HHRC4/1.81 Structural Composite Lumber / Solid Sawn Lumber Ridge 4x – Hip 1 3/4 12 3 5/8 1 13/16 Zinc Galvanized, G90 1
HHRC42 Solid Sawn Lumber Ridge 4x – Hip 2x 12 3 5/8 1 9/16 Zinc Galvanized, G90 1
HHRC42-2 Solid Sawn Lumber Ridge 4x – Hip (2) 2x 12 3 5/8 3 1/8 Zinc Galvanized, G90 1
HHRC44 Solid Sawn Lumber / Structural Composite Lumber SSL: Ridge 4x – Hip 4x / SCL: Ridge 3 1/2 – Hip 3 1/2 12 3 5/8 3 5/8 Zinc Galvanized, G90 1
HHRC5.25/3.25 Glulam Ridge 5 1/8 – Hip 3 1/8 12 5 1/4 3 1/4 Zinc Galvanized, G90 1
HHRC5.37/3.12 Structural Composite Lumber / Solid Sawn Lumber Ridge 5 1/4 – Hip (2) 2x 12 5 3/8 3 1/4 Zinc Galvanized, G90 1
HHRC5.37/3.56 Structural Composite Lumber / Solid Sawn Lumber Ridge 5 1/4 – Hip 3 1/2 12 5 3/8 3 5/8 Zinc Galvanized, G90 1
HHRC64 Solid Sawn Lumber Ridge 6x – Hip 4x 12 5 5/8 3 5/8 Zinc Galvanized, G90 1
HHRC66 Solid Sawn Lumber Ridge 6x – Hip 6x 12 5 5/8 5 5/8 Zinc Galvanized, G90 1

Load Tables

HHRC Allowable Loads

    Many of these products are approved for installation with Strong-Drive® SD Connector screws.

HHRC Allowable Loads
  1. Allowable loads shown are for each hip. Total load carried by the connector is double this number.
  2. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
  3. Fasteners: SD screws are Simpson Strong-Tie® Strong-Drive® screws. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT