Cold-Formed Steel: L & S/LS Reinforcing and Skewable Angles

S/LS
Patent No. 4,230,416

Typical L50 Installation

Typical LS90 Installation

S/LS Top View

www.strongtie.com

L & S/LS Reinforcing and Skewable Angles

L and S/LS angles are load rated and provide the correct thickness and number of fasteners the specifier is looking for compared with field fabricated clip angles.

General utility reinforcing angles with multiple uses.

S/LS - Field adjustable angles attach members intersecting at angles.

Material: L - 54 mil (16 ga); S/LS - 43 mil (18 ga)

Finish: Galvanized. Some products available in stainless steel or ZMAX®. See Corrosion Information.

Installation:

Use all specified fasteners.
S/LS - field-skewable; bend one time only.
Joist must be constrained against rotation when using a single S/LS per connection.

top Gallery:

roll over images below to see larger image

top Load Table: See code report listings below

Tabulated loads are governed by tests and may not be increased. Refer to Steel Stress Increase for additional information.
Loads are for one part only.
Code approval is limited for specific steel thickness. Refer to Code Report for additional information.

top Code Reports (PDFs):

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
L30		ESR-2606	RR25119 / RR25489 / RR25716	FL474 / FL9601	NER-413	ER-5275 / ER-5672
L50		ESR-2606	RR25119 / RR25489 / RR25716	FL474 / FL9601	NER-413	ER-5275 / ER-5672
L70		ESR-2606	RR25119 / RR25489 / RR25716	FL474 / FL9601	NER-413	ER-5275 / ER-5672
L90		ESR-2606	RR25119 / RR25716	FL474	NER-413	ER-5672
S/LS	No code listing. Please contact us for test data.
S/LS30	No code listing. Please contact us for test data.
S/LS70			RR25489	FL9601		ER-5275