Cold-Formed Steel: S/DSC Drag Strut Connectors

www.strongtie.com

S/DSC Drag Strut Connectors

The S/DSC is used as a drag strut to transfer loads from roof framing to the wall plates below.

Material: 229 mil (3 ga)

Finish: Galvanized

Installation:

roll over images below to see larger image


S/DSC4R/L (Right hand S/DSC shown; specify right or left hand when ordering) U.S. Patent 6.655,096		Typical S/DSC4R Installation

Tabulated loads are governed by tests and may not be increased. Refer to Steel Stress Increase for additional information.
Loads are based on a minimum of a 43 mil (18 ga) thick member.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
S/DSC	No code listing. Please contact us for test data.
S/DSC4L	No code listing: Please contact us for test data.
S/DSC4R	No code listing: Please contact us for test data.

topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
S/DSC	None for this model	None for this model
S/DSC4L	S/DSC4L: DWG \| DXF S/DSC4L front view: DWG \| DXF S/DSC4L left view: DWG \| DXF S/DSC4L right view: DWG \| DXF S/DSC4L top view: DWG \| DXF	None for this model
S/DSC4R	S/DSC4R: DWG \| DXF S/DSC4R front view: DWG \| DXF S/DSC4R left view: DWG \| DXF S/DSC4R right view: DWG \| DXF S/DSC4R top view: DWG \| DXF	None for this model

Order free catalogs by mail

Truss Connectors (Cold-Formed Steel)

Printed from