Cold-Formed Steel: S/GTC Girder Truss Connector

www.strongtie.com

S/GTC Girder Truss Connector

The S/GTC truss connector is designed to connect a carried truss to a girder truss vertical member.

Material: 33 mil (20 ga)

Finish: Galvanized

Installation:

Use all specified fasteners; see General Notes.
Install the connector onto the girder truss member first.
May be used with proprietary material sections with web material dimensions from 1 3/8" to 1 5/8". Contact material supplier for product specific installation details.

Available 1st Quarter 2008

top Gallery:

roll over images below to see larger image


S/GTC		Typical S/GTC Installation The S/GTC works for many proprietary truss shapes including Alpine, Amkey, Nucon, Nutruss and Steelcon.

Tabulated loads are governed by tests and may not be increased. Refer to Steel Stress Increase for additional information.
Trusses shall be laterally braced per Designer specification.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
S/GTC	No code listing: Please contact us for test data.

topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
S/GTC	None for this model	None for this model

Order free catalogs by mail

Truss Connectors (Cold-Formed Steel)

Printed from