S/HTC Heavy Truss Clip
Product Details
S/HTC provides a slotted connection from the truss or joist to the top track when isolation of two members is required.
Material
- 43 mil (18 ga.)
Finish
- Galvanized (G90)
Installation
- Use all specified fasteners
- Screws in vertical slots shall not be driven completely flush against the connector when vertical movement is desired
Related Literature
Product Information Table
Model No. | Thickness (mil) | Ga. | Coating/Material | Packaging Qty. |
---|---|---|---|---|
S/HTC4 | 43 | 18 | Zinc Galvanized, G90 | 1 |
Load Tables
- Truss or rafter must be bearing on top plate to achieve the allowable loads under "Without Gap."
- Installed with maximum 1 1/4" space between rafter or truss and top plate under "With 1 1/4" Gap." Where loads are not required, space is not limited to 1 1/4".
- See Fastening Systems for more information on Simpson Strong-Tie fasteners.
Code Reports & Compliance
Drawings
DWG | DXF | RFA | IFC | SAT | |||
---|---|---|---|---|---|---|---|