JUMP TO:
Each tool has been designed to work with Epoxy-Tie cartridges for trouble-free dispensing. These tools are for use with SET, SET-XP®, EDOT, ET, ETI adhesives and CIP and CIP-F paste-over material.
CDT10
CDT-10
Premium Manual Dispensing Tool for
The CDT10 features a high thrust drive mechanism and a molded fiber reinforced nylon body for ultimate strength and light weight. The handle is positioned under the cartridge for balance and ease of use. The drive mechanism is released by pushing forward on the drive handle. Cartridges “snap-lock” into position.
EDT22S
EDT22S NEW
Manual Dispensing Tool for 22 oz. Epoxy-Tie® Adhesive Cartridges
The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use, delivering maximum performance for all 22 oz. Simpson Strong-Tie Anchor Systems® adhesives.
FEATURES:
- 26:1 thrust ratio delivers maximum dispensing power
- Double-gripping plates eliminates drive rod slippage
- Cartridges snap into place for better alignment
- All steel construction for durability
EDT22B
EDT22B
Manual Dispensing Tool for 22 oz. Epoxy-Tie® Adhesive Cartridges
The EDT22B features a molded fiber reinforced nylon body for ultimate strength and light weight. The handle is positioned under the cartridge for balance and ease of use. The drive mechanism is released by pushing forward on the drive handle. Cartridges “snap-lock” into position.
EDT22B Instructions (PDF, 100k)
EDT22CKT Tool (left)
EDT22CKT Charger (right)
EDT22CKT
Battery-Powered Dispensing Tool for 22 oz. Epoxy-Tie® Adhesive Cartridges
The EDT22CKT offers power dispensing without the need for a hose or compressor. The tool features dosage and rate control for maximum efficiency. Each battery charge dispenses approximately 25 cartridges and recharging takes 1 hour. Tool comes complete with two 14.4V batteries and a charger.
EDT22AP
EDT22AP
Pneumatic Dispensing Tool for 22 oz. Epoxy-Tie® Adhesive Cartridges
The EDT22AP has an ergonomically designed nylon handle that includes a flow rate adjustment. This lightweight tool (6 lbs.) also features a power piston return.
EDT22AP Parts Schematic (PDF, 431k)
EDT56AP
EDT56AP
Pneumatic Dispensing Tool for 56 oz. Epoxy-Tie® Adhesive Cartridges
The EDT56AP has an ergonomically designed nylon handle that includes a flow rate adjustment. This lightweight tool (9 lbs.) also features a power piston return.
EDT56AP Parts Schematic (PDF, 426k)
- Air supply attachment is 1/4-18 NPT (male) thread.
- Recommended operating air pressure is between 80-100 psi (116 psi max.).
ADT813B
ADT813B
Manual Dispensing Tool for 8 oz. and 13 oz. Acrylic-Tie® Adhesive Cartridges
The ADT813B features a molded fiber-reinforced nylon body for ultimate strength and light weight. The handle is positioned under the cartridge for balance and ease of use. The drive mechanism is released by pushing forward on the drive handle. Cartridges “snap-lock” into position.
ADT813 Instructions (PDF, 99k)
ADT30S
ADT30S NEW
Manual Dispensing Tool for 30 oz. Acrylic-Tie® Adhesive Cartridges
The ADT30S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use.
FEATURES:
- 26:1 thrust ratio
- Double-gripping plates eliminates drive rod slippage
- Rugged and durable steel construction
- Engineered for continuous, high-volume use
ADT30
ADT30
Manual Dispensing Tool for 30 oz. Acrylic-Tie® Adhesive Cartridges
The ADT30 features a steel carriage and a molded fiber-reinforced nylon body for ultimate strength and light weight. The handle is positioned under the cartridge for balance and ease of use. The drive mechanism is released by pushing forward on the drive handle.
ADT30 Instructions (PDF, 96k)
ADT30CKT Tool (left)
ADT30CKT Charger (right)
ADT30CKT
Battery Powered Dispensing Tool for 30 oz. Acrylic-Tie® Adhesive Cartridges
The ADT30CKT offers power dispensing without the need for a hose or compressor. The tool features dosage and rate control for maximum efficiency. Each battery charge dispenses approximately 25 cartridges and recharging takes 1 hour. Tool comes complete with two 14.4V batteries and a charger.
ADT30P
ADT30P
Pneumatic Dispensing Tool for 30 oz. Acrylic-Tie® Adhesive Cartridges
The ADT30P has an ergonomically designed nylon handle complete with flow rate adjustment. This lightweight tool (6 lbs.) also features a power piston return.
ADT30P Parts Schematic (PDF, 432k)
- Air supply attachment is 1/4-18 NPT (male) thread.
- Recommended operating air pressure is between 80-100 psi (116 psi max.).
