www.strongtie.com
Drop-in anchors are internally threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for flush mounting in solid base materials. Simpson Strong-Tie® now introduces a 1/2" diameter Short Drop-In to complement its existing 3/8" diameter offering for solid and hollow concrete applications. The short length enables shallow embedment that helps avoid drilling into rebar or prestressing strands.
Also see the Short Drop-In Anchor Flier (PDF)
The GCN150 is a portable gas-actuated nailer for attaching light-duty fixtures such as drywall track, furring strips, hat track and angle track to concrete, steel, block and metal deck. The GCN150 uses a 1,300 shot fuel cell and features a 40 pin magazine for high volume productivity.
AT10 Acrylic-Tie® adhesive is a 9.6 ounce single tube cartridge that can be dispensed with a commonly available 10 ounce dispensing tool. A special dispensing tool is not required. AT10 adhesive comes with a mixing nozzle and offers the same performance characteristics as the rest of the Acrylic-Tie product line.
The Strong-Bolt wedge anchor is specifically designed for optimum performance in both cracked and uncracked concrete - meeting the post-installed anchor performance requirements of the 2006 IBC. The Strong-Bolt anchor has proven to offer increased reliability in the most adverse conditions, including proper functioning in cracked concrete under static and seismic loads.
The Titen HD heavy-duty anchor is a patented screw anchor designed for use in concrete and masonry applications. This anchor is code tested to provide outstanding performance in cracked and uncracked concrete under both static and seismic conditions. It is designed to meet the requirements that the 2006 IBC places on post-installed anchors. In addition to being an ideal anchor for a variety of severe structural applications, the non-expansion installation characteristics make it ideal when minimum edge distance and reduced spacing is a concern.
CIP-F is a flexible, peelable and fast-curing polyurea paste-over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP-F can be peeled off at the completion of a crack injection job by pulling on starter tabs initially placed under the top surface of the paste-over at the time of application or by prying under the paste-over.
CIP is a fast-curing, two-part epoxy paste-over material. It is used to seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP sets up hard and can either be left on the concrete or ground or chiseled off at the completion of a crack injection job.
CIP-F is a flexible, peelable and fast-curing polyurea paste-over material. It is used to temporarily seal cracks and to secure injection ports over concrete prior to epoxy or urethane foam injection repair. CIP-F can be peeled off at the completion of a crack injection job by pulling on starter tabs initially placed under the top surface of the paste-over at the time of application or by prying under the paste-over.
The new stainless-steel Titen® screws are ideal for attaching all types of components to concrete and masonry in environments where corrosion is a concern. These screws, available in hex and phillips head styles, combine the versatility of our standard Titen screws with the benefits of enhanced corrosion protection.
PDPA pins are specifically designed for driving into structural steel that is up to 1/2" thick, and into extra hard concrete. Manufactured to tight tolerances for maximum performance in demanding substrates where speed and convenience offered by powder actuated fastening is desired.
The EMN22i is a one piece, integrated adhesive mixing nozzle for use with 22 oz. and 56 oz. Epoxy-Tie® cartridges and 30 oz. Acrylic-Tie® cartridges. This 18 element mixing nozzle ensures proper proportioning and mixing of two-component adhesive formulations.
EDOT™ Epoxy-Tie® is an epoxy adhesive formulated to be an economical and high strength alternative for transportation projects. Available in cartridge and bulk packaging, it is an ideal adhesive for threaded rod anchoring and rebar doweling.
TORQ-CUT™ AnchorThe Torq-Cut™ self-undercutting anchor is a heavy-duty, high-capacity anchor designed and tested for use in cracked and uncracked concrete under static and seismic-loading conditions. It is designed to meet the requirements that the 2006 IBC places on post-installed anchors. The built-in ring with hardened cutters expands with installation torque forming undercut grooves in the concrete. This interlocking connection between the anchor and the concrete provides superior load carrying capacity.
ICC-ES PENDING
Product testing has been completed by an ICC-ES accredited test laboratory, and the data has been submitted to, and is currently under review by
AT-XP™ Acrylic-Tie® Anchoring AdhesiveAT-XP™ Acrylic-Tie® anchoring adhesive is specifically formulated for fast curing and delivers optimum performance anchoring threaded rod and dowels in uncracked concrete. AT-XP adhesive blends high strength with easy cold-weather dispensing and excellent reduced-temperature performance to provide a complete adhesive anchoring solution.
ICC-ES PENDING
Product testing has been completed by an ICC-ES accredited test laboratory, and the data has been submitted to, and is currently under review by
Strong-Bolt 2™ Wedge AnchorThe Strong-Bolt™ 2 wedge anchor is the next-generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt™ 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seismic loading. It is code-listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.
CODE LISTED: ICC-ES ESR-3037
The new GCN-MEP gas-actuated concrete nailer is the ideal solution for attaching light-duty fixtures to concrete, CMU and metal deck for mechanical, electrical and plumbing (MEP) applications. Since the tool does not require electrical cords or pneumatic hoses, the gas-actuated GCN-MEP is completely portable, increasing productivity.
Simpson Strong-Tie Anchor Systems introduces the PSATG, a new plastic screw anchor that brings an innovative high-performance design to a broad range of applications and substrates, such as fastening bathroom fi xtures, window treatments, picture framing and shelving. The PSATG features "triple-grip" technology with claws on the neck that hold the anchor stationary while inserting the screw. Two expandable wings also provide gripping power, fastening tightly behind the wall for maximum holding power.
Titen HD® Rod HangerThe Titen HD Rod Hanger is a high-strength screw anchor that provides a fast and convenient way to suspend threaded rod from concrete slabs and beams. The anchor's high load capacity is a result of the full length threads that undercut the concrete and effectively transfer load into the base material. Simpson Strong-Tie Anchor Systems now offers two new designs featuring a 3/8" shank that are code-listed by ICC-ES for cracked and uncracked concrete applications under the 2006 and 2009 IBC
CODE LISTED: ICC-ES ESR-2713
The Sure Wall anchors are designed to self-drill into drywall and provide excellent holding value and greater capacity than screws alone. The standard Sure Wall cuts threads into drywall, greatly increasing the bearing surface and strength of the fastening. The Sure Wall Gripper expands behind the drywall, greatly increasing the bearing surface, resulting in higher loads than the standard Sure Wall. The Sure Wall Nylon Toggle has a die-cast zinc-drilling point that toggles into position to provide the most bearing surface behind the drywall and the highest capacity in the Sure Wall product line.
The PT-22P is a single-shot powder-actuated tool engineered for continuous use, high reliability and low maintenance. Its all-aluminum body provides rugged durability.
