Sleeve-All® sleeve anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials. These anchors are available in acorn, hex, rod coupler, flat or round head styles for a wide range of applications.
GALLERY: roll over images below to see larger image
Sleeve-All Anchors
Acorn
Hex
Flat (Phillips Head)
Round
Rod Coupler
MATERIAL
Carbon and stainless steel
FINISH
Carbon Steel: Zinc plated
INSTALLATION
For installation instructions, click here.
CODE REPORTS
- Factory Mutual 3017082, 3026805, 3029959, and 3043442, 3/8"–3/4" dia.
- Underwriters Laboratories File Ex3605, 3/8"–3/4" dia.
- Meets requirements of Federal Specifications A-A-1922A
The load tables list values based upon results from the most recent testing and may not reflect those in the current code reports. Where code jurisdictions apply, consult the current reports for applicable load values.
SUGGESTED SPECIFICATIONS
Sleeve anchors shall be zinc plated studs having a minimum 50,000 psi tensile strength with an expansion sleeve meeting AISI 1008 cold rolled steel or type 304 stainless steel stud with a type 304 stainless-steel expansion sleeve, as called for on the drawings. Sleeve anchors shall meet Federal Specifications A-A-1922A. Anchors shall be Sleeve-All® expanding sleeve anchors from Simpson Strong-Tie, Pleasanton, CA. Anchors shall be installed following the Simpson Strong-Tie instructions for Sleeve-All expanding sleeve anchors.
LINKS:
Material Specifications
Length Identification Head Marks on Sleeve-All Anchors (corresponds to length of anchor - inches).
