www.strongtie.com


Sure WallDrywall Anchors

Sure Wall anchors are designed to self-drill into drywall and provide excellent holding value and greater capacity than screws alone. The standard Sure Wall cuts threads into drywall, greatly increasing the bearing surface and strength of the fastening. The Sure Wall Gripper expands behind the drywall, greatly increasing the bearing surface, resulting in higher loads than the standard Sure Wall. The Sure Wall Nylon Toggle has a die-cast, zinc-drilling point that toggles into position to provide the most bearing surface behind the drywall and the highest capacity in the Sure Wall product line.

GALLERY: roll over images below to see larger image

Sure Wall Nylon

Sure Wall
Zinc

Sure Wall Gripper

Sure Wall Nylon Toggle


FEATURES

  • Self-Drilling: Only a screwdriver needed for installation in gypsum board drywall
  • Standard Sure Wall can be used as a fastener in fixtures with sufficiently large holes
  • All designs maximize the load-carrying capacity of gypsum drywall
  • New designs include screws with the anchors

MATERIAL

  • Sure Wall Standard: Die-cast zinc or reinforced nylon
  • Sure Wall Gripper: Reinforced nylon
  • Sure Wall Toggle: Reinforced nylon with a die-cast, zinc drilling point/toggle

INSTALLATION

See below.

 

Product Data

Sure Wall Product Data
Sure Wall Standard and Toggle Product Data
Sure Wall Gripper Product Data
Sure Wall Standard and Toggle Product Data
Sure Wall Nylon Toggle Product Data
Sure Wall Standard and Toggle Product Data

Load Data

Tension Load Shear Load
Sure Wall
Tension and Shear Loads in 1/2" Drywall
Sure Wall Load Data
  1. The allowable loads listed are based on a safety factor of 4.0.
  2. The allowable loads listed are based on single anchor tests.
  3. The performance of multiple anchors spaced closely together has not been investigated.
Tension Load Shear Load
Sure Wall Gripper
Tension and Shear Loads in 1/2" Drywall
Sure Wall Toggle Load Data
See notes to left.
Tension Load Shear Load
Sure Wall Nylon Toggle
Tension and Shear Loads in 1/2" Drywall
Sure Wall Toggle Load Data
See notes to left.
 
INSTALLATION
go to top of page
 
Standard Sure Wall (Nylon or Zinc):
  • With the screwdriver inserted in the anchor, push the point of the anchor into the base material to get it started.
  • Screw the anchor into the base material, turning clockwise.
  • Hold the fixture in place and install the screw (screw is not needed when the fixture hole accepts the Sure Wall anchor).
Standard Sure Wall Installation Sequence
install sequence

Sure Wall Gripper Installation Sequence
install sequence
 
 
Sure Wall Toggle:
  • With the screwdriver inserted in the anchor, screw the tip of anchor into the base material, turning clockwise.
  • Stop turning once the tip penetrates through the base material. Turn the anchor so that the arrow on the head of the anchor is pointing up and push the anchor until the head is flush with the surface of the base material.
  • Insert the screw into the anchor and push until the screw reaches the back of the anchor.
  • Begin turning the screw clockwise to engage the toggle and pull it snug against the backside of the base material.
Sure Wall Toggle Installation Sequence
install sequence
 
 
go to top of page

Printed from
© 2014 Simpson Strong-Tie Company Inc.