Wedge-All® Wedge Anchors
Shear Loads for Carbon-Steel Wedge-All® (and Tie-Wire) Anchors
in Normal-Weight Concrete
- The allowable loads listed are based on a safety factor of 4.0.
- Refer to allowable load-adjustment factors for spacing and edge distance.
- Drill bit diameter used in base material corresponds to nominal anchor diameter.
- Allowable loads may be linearly interpolated between concrete strengths listed.
- Allowable loads for 1/4-inch size at 1 1/8-inch embedment apply to both the Wedge-All® and Tie-Wire anchors. Installation torque does not apply to the Tie-Wire anchor.
- The minimum concrete thickness is 1 1/2 times the embedment depth.
