www.strongtie.com


Wedge-All® Wedge Anchors

Tension and Shear Loads for Carbon-Steel Wedge-All® (and Tie-Wire)

Anchors in Sand-Lightweight Concrete over Metal Deck

 
Tension Load Light Weight Concrete over Metal Deck
Tension Loads for Carbon-Steel Wedge-All® (and Tie-Wire) Anchors in Sand-Lightweight Concrete over Metal Deck
Tension Loads for Carbon Steel Wedge-All (and Tie-Wire) Anchors in Sand-Lightweight Concrete over Metal Deck
  1. The allowable loads listed are based on a safety factor of 4.0.
  2. Refer to allowable load-adjustment factors for edge distance.
  3. 100% of the allowable load is permitted at critical spacing, loads at reduced spacing have not been determined.
  4. Drill bit diameter used in base material corresponds to nominal anchor diameter.
  5. The minimum concrete thickness is 1 1/2 times the embedment depth.
  6. Metal deck must be minimum 20 gauge.
  7. Anchors installed in the bottom flute of the steel deck must have a minimum allowable edge distance of 1 1/2" from the inclined edge of the bottom flute.
 
Lightweight Concrete On Metal Deck
Lightweight Concrete On Metal Deck
 
 
Tension Load Light Weight Concrete over Metal Deck
Shear Loads for Carbon-Steel Wedge-All® (and Tie-Wire) Anchors in Sand-Lightweight Concrete over Metal Deck
Tension Loads for Carbon Steel Wedge-All (and Tie-Wire) Anchors in Sand-Lightweight Concrete over Metal Deck
  1. The allowable loads listed are based on a safety factor of 4.0.
  2. Refer to allowable load-adjustment factors for edge distance.
  3. 100% of the allowable load is permitted at critical spacing, loads at reduced spacing have not been determined.
  4. Drill bit diameter used in base material corresponds to nominal anchor diameter.
  5. The minimum concrete thickness is 1 1/2 times the embedment depth.
  6. Metal deck must be minimum 20 gauge.
  7. Anchors installed in the bottom flute of the steel deck must have a minimum allowable edge distance of 1 1/2" from the inclined edge of the bottom flute.
Printed from
© 2014 Simpson Strong-Tie Company Inc.