WEDGE-ALL® Wedge Anchors
Tension Loads for Stainless Steel Wedge-All® Anchors
in Normal-Weight Concrete
- The allowable loads listed are based on a safety factor of 4.0.
- Allowable loads may be increased by 33 1/3% for short-term loading due to wind or seismic forces where permitted by code.
- Refer to allowable load-adjustment factors for spacing and edge distance.
- Drill bit diameter used in base material corresponds to nominal anchor diameter.
- Allowable loads may be linearly interpolated between concrete strengths listed.
- The minimum concrete thickness is 1 1/2 times the embedment depth.
