www.strongtie.com


USA / Canada | Change Location...

PDP and PDPH Series Fasteners –

Tension and Shear Loads in Steel

 
Tension Load Shear Load Steel
PDP Series Fasteners - Tension and Shear Loads in Steel
PDP Series Fasteners - Tension and Shear Loads in Steel

See notes below.

PDP

PDP
click on the link above for more information on these fasteners

 
PDPW

PDPW
click on the link above for more information on these fasteners

 
PDPWL

PDPWL
click on the link above for more information on these fasteners

The table applies to the following Simpson Strong-Tie fasteners where minimum penetration exists:

PDP
PDPW
PDPWL
PDP-50K – –
PDP-62K – –
PDP-100 PDPW-100 PDPWL-100
PDP-125 PDPW-125 PDPWL-125
PDP-150 PDPW-150 PDPWL-150
PDP-175 PDPW-175 PDPWL-175
PDP-200 PDPW-200 PDPWL-200
PDP-225 – –
PDP-250 PDPW-250 PDPWL-250
PDP-300 PDPW-300 PDPWL-300
 
Tension Load Shear Load Steel
PDPH Series Fasteners - Tension and Shear Loads in Steel
PDPH tension and shear loads in steel
  1. The entire pointed portion of the fastener must penetrate through the steel to obtain the tabulated values. See Detail A.
  2. The allowable tension and shear values are for the fastener to steel only. Connected members must be investigated separately in accordance with accepted design criteria.
  3. Steel must conform to ASTM A36 specifications, with Fy = 36,000 psi, minimum.
detail A
 
PDP

PDPH
click on the link above for more information on these fasteners

 

Home | About Simpson Strong-Tie | Contact Simpson Strong-Tie | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson Strong-Tie newsletters

Copyright © 2012, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2012 Simpson Strong-Tie®