www.strongtie.com


USA / Canada | Change Location...

PHN Series Fasteners

Tension and Shear Loads in Steel

 
Tension Load Shear Load Steel
PHN Series Low Velocity Fasteners - Tension and Shear Loads in Steel
detail A
  1. The entire pointed portion of the fastener must penetrate the steel to obtain the tabulated values. See Detail A.
  2. The allowable tension and shear values are for the fastener into steel only. Wood members connected must be investigated separately in accordance with accepted design criteria.
  3. Steel must conform to ASTM A 36 specifications, with Fy = 36,000 psi, minimum.
  4. PHN-16K or longer.
PHN

PHN
click on the link above for more information on these fasteners

 
PHNW

PHNW
click on the link above for more information on these fasteners

 
PHSN

PHNSA
click on the link above for more information on these fasteners

The table applies to the following Simpson Strong-Tie fasteners where minimum penetration exists:

PHN
PHNW
PHSNA
PHN-16K PHSNA-16K
PHN-19K PHSNA-19K
PHN-27 PHNW-27 PHSNA-27
PHN-32 PHNW-32 PHSNA-32
PHN-37 PHNW-37 PHSNA-37
PHN-42 PHNW-42 PHSNA-42
PHN-47 PHNW-47 PHSNA-47
PHN-52 PHNW-52 PHSNA-52
PHN-57 PHNW-57 PHSNA-57
PHN-62 PHNW-62 PHSNA-62
PHN-72 PHNW-72 PHSNA-72
 

Home | About Simpson Strong-Tie | Contact Simpson Strong-Tie | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson Strong-Tie newsletters

Copyright © 2012, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2012 Simpson Strong-Tie®