www.strongtie.com


USA / Canada | Change Location...

Anchor Systems Catalog Changes and Corrections

To keep you as informed as possible, we have updated some of the product information on this website.

Please note that the following updates were made after the printing of the 2009-2010 Anchor Systems Catalog (C-SAS-2009).
Some of these changes are included in the 2011 Addendum. The information on this website is the most recent and correct information.
Use the links below to view and print updated web pages.

ALSO SEE: New Products. New models that have been added to existing product lines are listed in the Changes Made section below.
Entirely new products are listed on the New Products page, and include:



If you have any questions, please call technical engineering support at (800) 999-5099, or use our web contact form.


CHANGES MADE:

Catalog Page
Product
(click for web page)
Date
Updated 		Description of Change
35

pages 6-8 of the 2011 Addendum incorporates these updates
SET-XP® Structural Epoxy-Tie Anchoring Adhesive 10/15/10 Corrected the symbol for Drill Bit Diameter and the formula for Minimum Concrete Thickness in the table entitled "SET-XP™ Epoxy Anchor Installation Information and Additional Data for Threaded Rod and Rebar in Normal-Weight Concrete".
    5/4/11 Added 56oz. cartridge system to available sizes. Updated Cure Schedule to include cure time for 60°F (16°C). Added City of Los Angeles code report RR25744. Updated Installation Information and Additional Data to match ICC-ES ESR-2508—including nomenclature, Maximum Tightening Torque and Minimum Concrete Thickness.
35

page 7 of the 2011 Addendum incorporates these updates
SET-XP® - Tension Design Data 10/15/10 Corrected the Threaded Rod Tension Resistance of Steel - Type 304 and 316 Stainless (ASTM A193, Grade B8 and B8M) and the Rebar Strength Reduction Factor - Steel Failure in table entitled "SET-XP® Epoxy Tension Design Data for Threaded Rod and Rebar in Normal-Weight Concrete".
    5/4/11 Added data for 3/8" and 1 1/4" anchor diameters (#3 and #10 rebar sizes).
36

page 8 of the 2011 Addendum incorporates these updates
SET-XP® - Shear Design Data 10/15/10 Corrected the Threaded Rod Shear Resistance of Steel - Type 304 and 316 Stainless (ASTM A193, Grade B8 and B8M) and the Rebar Strength Reduction Factor - Steel Failure in table entitled "SET-XP® Epoxy Shear Design Data for Threaded Rod and Rebar in Normal-Weight Concrete".
    5/4/11 Added data for 3/8" and 1 1/4" anchor diameters (#3 and #10 rebar sizes).
68
page 36 of the 2011 Addendum has the new information

See webpage for all information.
AT High Strength Acrylic-Tie® Anchoring Adhesive 5/4/11 Updated In-Service Temperature Sensitivity chart.
87-88
page 12 of the 2011 Addendum has the new information

See webpage for all information.
Adhesive Accessories 5/4/11 Added new EDT22S dispensing tool for 22 oz. Epoxy-Tie, and new ADT30S dispensing tool for 30 oz. Acrylic-Tie.
92
page 12 of the 2011 Addendum has the new information

See webpage for all information.
Hole Cleaning Brushes 5/4/11 Added new Hole Cleaning Brush ETB12.
111-114
pages 13-16 of the 2011 Addendum incorporate all the new Torq-Cut information
Torq-Cut™ Self-Undercutting Anchor for Cracked and Uncracked Concrete 5/4/11 In the Product Data tables:
  • Added Minimum Effective Embedment Depth column
  • Deleted Base of Anchor to Top of Sleeve Column
  • Updated Box Quantities
In Material Specifications table:
  • Updated Spacer Sleeve and Undercut Expansion Ring steel types
Updated Drilled Hole Depth figure and added footnotes.
111
page 13 of the 2011 Addendum incorporates the new Torq-Cut installation information
Torq-Cut™ - Installation Information 5/4/11 Updated Installation Instructions. Added Setting Tool part numbers.
113
page 15 of the 2011 Addendum incorporates the new Torq-Cut Tension Design Data
Torq-Cut™ - Tension Design Data 5/4/11 Added Pre-Set Minimum Baseplate Clearance Hole Diameter, updated nomenclature.
114
page 16 of the 2011 Addendum incorporates the new Torq-Cut Shear Design Data
Torq-Cut™ - Shear Design Data 5/4/11 Updated values for Load Bearing Length of Anchor in Shear.
116
page 36 of the 2011 Addendum has the new information.
Strong-Bolt™ Wedge Anchor for Cracked and Uncracked Concrete 5/4/11 Updated Thread Lengths of Strong-Bolt Anchor in Product Data table.
119-123
pages 37-38 of the 2011 Addendum have the new Titen HD information
TITEN HD® Heavy Duty Screw Anchor for Concrete and Masonry

TITEN HD® Installation

TITEN HD® Tension Design Data

TITEN HD® Shear Design Data

TITEN HD® Tension and Shear Data for Normal-Weight or Sand-Lightweight Concrete over Metal Deck 		5/4/11 Updated Titen HD data to be consistent with ICC-ES ESR-2713.
132
page 39 of the 2011 Addendum has the new information.
Titen HD® Rod Coupler - Tension and Shear Loads 5/4/11 Added Minimum End Distances to load tables.
133
pages 22-25 of the 2011 Addendum incorporate all the new Titen HD Rod Hanger information
TITEN HD® Rod Hanger 10/26/10 Added product information for models THD37212RH and THD50234RH, which are code-listed by ICC-ES (ESR-2713) for cracked and uncracked concrete applications under the 2006 and 2009 IBC.
133

pages 22-25 of the 2011 Addendum incorporate all the new Titen HD Rod Hanger information
TITEN HD® Rod Hanger - Strength Design Values: in Tension for Installations in Concrete

TITEN HD® Rod Hanger - Strength Design Values: in Tension for Installations in the Lower and Upper Flute of Normal-Weight or Sand-Lightweight Concrete through Metal Deck

TITEN HD® Rod Hanger - Allowable Stress Design (ASD) Values with 1/4" and 3/8" Shanks Tension Loads in Normal-Weight Concrete 		10/26/10 Added load information for models THD37212RH and THD50234RH, based on ICC-ES ESR-2713.
153-158
pages 26-27 of the 2011 Addendum has the new Short Drop-In Anchor product information
 DROP-IN Internally-Threaded Expansion Shell Anchor
 9/13/10 Added information for new 1/2" Short Drop-In Anchor model, DIA50S; added fixed depth drill bits.
155
pages 26-27 of the 2011 Addendum has the new Short Drop-In Anchor product information


 SHORT DROP-IN Tension & Shear Loads in Normal-Weight Concrete and Hollow Core Concrete Panel

SHORT DROP-IN Tension & Shear Loads in Sand-Lightweight Concrete Fill over Metal Deck 		9/13/10 Added DIA50S load values in Normal Weight Concrete, Hollow Core Concrete Panel and Sand Lightweight Concrete Fill over Metal Deck.
page 40 of the 2011 Addendum has the updated Drop-In Anchor load tables
DROP-IN Tension Loads in Normal-Weight Concrete

DROP-IN Shear Loads in Normal-Weight Concrete 		5/4/11 Added the Coil-Thread Drop-In to the Tension and Shear tables (there is no longer a separate load table for the Coil-Thread Drop-In).
159
page 41 of the 2011 Addendum has the new code information
Blue Banger Hanger® Cast-in-Place, Internally Threaded Inserts 5/4/11 Added UL Standard 2043, 2nd edition recognition for BBMD.
177
page 28 of the 2011 Addendum incorporates all the new Sure Wall Drywall Anchor information
Sure Wall Drywall Anchor 5/4/11 All new section, including Sure Wall, Sure Wall Gripper and Sure Wall Nylon Toggle.
180-182
page 32 of the 2011 Addendum has the new information

See webpages for all information
GCN150 Concrete Nailer 5/4/11 Added product information for GDPS (.160 Shank Diameter) Steel Pins and for the GWL-100 Lathing Washer and GMR-1 Magnetic Ring.
Fasteners For GCN150 Gas-Actuated Nailer 5/4/11 Added load information for GDPS Steel Pins.
199-205
page 34 of the 2011 Addendum has the new information

See webpages for all information
Fasteners For Simpson Strong-Tie® Powder-Actuated Tools 5/4/11 Added product information and load values for several new lengths of the PDPA (.300 Headed Fastener with .157 Shank Diameter) line of pins.
214
page 35 of the 2011 Addendum has the new information

See webpages for all information
SDS-PLUS® Drill Bits 5/4/11 Added new line of SDS-PLUS® Solid-Tip Carbide Drill Bits. Added new 7/32" diameter model of SDS-PLUS® Shank Bits, Model No. MDPL02120.
215
page 35 of the 2011 Addendum has the new information

See webpages for all information
SDS-MAX® Drill Bits 5/4/11 Added new 3/8" x 13" model of SDS-MAX® Shank Bits, Model No. MDMC03713.
216
(click for updated PDF)
Straight Shank Drill Bits 2/19/09 Corrected the New Model Number for the 3/8" dia. by 12" long (10" drilling depth) Straight Shank drill bit (MDB03712).

Home | About Simpson Strong-Tie | Contact Simpson Strong-Tie | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson Strong-Tie newsletters

Copyright © 2012, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2012 Simpson Strong-Tie®