Cold-Formed Steel: Anchors

SET-XP®

Epoxy-based anchoring adhesive formulated for optimum performance in both cracked and uncracked concrete.

SET/ET/AT

Adhesive anchor solutions for securing rebar or thread rods to concrete.

Titen HD®

A patented, high-strength screw anchor for concrete and masonry.

Powder-Actuated Fasteners

Powder-actuated fasteners provide a quick and economical method for fastening cold-formed steel to concrete or steel base materials.

Titen Screw

Screws designed to attach all types of components to concrete and masonry.

SSTB

High capacity anchor bolt with added features: head stamp identification, offset angle, and stamped embedment line.

RFB

Pre-cut threaded rod supplied with nut and washer

S/HDS & S/HDB

The S/HD series of holdowns is designed for installation with either screws or bolts into the studs or column.

S/HDU

Heavy duty holdown for cold-formed steel. Pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load.

S/LTT & S/HTT

Light and heavy tension ties to transfer load in post-pour. Ideal for retrofit and new construction.

STHD

Embedded strap tie holdown with high load capacity and designed to reduce spalling.

S/PAHD

Embedded strap tie holdown for steel-to-concrete.

PA/HPA

Purlin anchor with dual embedment line.

ICFVL

Engineered to solve the challenges of mounting CFS ledgers to insulated concrete form (ICF) walls.

High capacity anchor bolt for use with higher capacity holdowns. Smooth transition angle of bolt positions the bolt head away from near edge of concrete.

PAB

Versatile new cast-in-place anchor bolt ideal for high-tension-load applications. It features a plate washer at the embedded end sandwiched between two fixed hex nuts.

Gas-Acutated Fasteners

GDP concrete pins are designed to work with the GCN150 Gas-Actuated Concrete Nailer as well as with most major brand gas concrete nailer tools.




SET-XP® Structural Epoxy-Tie Anchoring Adhesive for Cracked and Uncracked Concrete Titen HD® Heavy-Duty Screw Anchor for Cracked and Uncracked Concrete Titen® Concrete & Masonry Screw Gas-Actuated Fasteners Powder-Actuated Fasteners		PAB Pre-Assembled Anchor Bolt SB Anchor Bolt SSTB Anchor Bolt RFB Retrofit Bolt The Simpson Strong-Tie™ SB® and SSTB™ anchor bolts are now code listed by ICC-ES under the 2006 and 2009 IBC® and IRC® to meet the requirements of the new ICC-ES acceptance criteria – AC 399. ICC-ES ESR-2611 is the industry’s first code report issued for proprietary anchor bolts evaluated to the criteria of AC 399. Additionally, Simpson Strong-Tie has tested the SB and SSTB anchor bolts per AC 399 for higher loads in slab-on-grade and stemwall-into-the-footing foundations.

Simpson Strong-Tie manufactures a full line of anchoring and fastening products for concrete and masonry. The product line includes adhesives for anchoring and crack injection, mechanical anchors, powder-actuated fasteners, gas-actuated concrete nailer and drill bits. Anchor Systems products offer unique solutions to applications in the light-framed construction market when used with, and without, Simpson Strong-Tie® connectors.

For complete information on product performance, installation requirements and appropriate code listings for Anchor Systems products, please see the Simpson Strong-Tie web site, or request an Anchor Systems CD-ROM which contains all of the information you need for your anchoring and fastening needs. In addition to complete product information and the Anchor Designer, Drill Bit Selector and Adhesive Estimator programs, the CD also contains product code reports, MSDS sheets and product fliers.