Cold-Formed Steel: Truss Connectors

AHEP Adjustable Hip-End Purlin

A structural purlin that also serves as an installation aid during the truss erection process.

S/DSC

The S/DSC is used as a drag strut to transfer loads from roof framing to the walls below.

TSBR and S/TSR

The TSBR and S/TSR capture the on-center spacing of CFS truss chords and webs and laterally restrains the truss members, allowing quicker, easier and safer installations.

TB & LTB

Tension-type bridging with maximum fastener flexibility.

TJC37

TJC37 is a versatile connector for skewed members. Adjustable from 0 to 67.5 degrees.

STC, STCT and DTC

For alignment control between a roof truss and nonbearing walls; the 1 1/2" slot permits vertical truss chord movement when loads are applied.

S/GTC

Designed to connect a carried truss to a girder truss vertical member.

S/HTC

Heavy Truss Clip accomodates truss movement and provides lateral capacity.

TBD22

A time-saving substitute for hat channel or C-stud diagonal bracing that helps meet the prescriptive recommendations of CFSBCSI.




AHEP Adjustable Hip-End Purlin S/DSC Drag Strut Connector S/GTC Girder Truss Connector S/HTC Heavy Truss Clips STC, STCT, DTC Roof Truss Clips		TB & LTB Bridging TBD22 Truss Brace Diagonal TJC37 Jack Truss Connector TSBR and S/TSR Truss Spacer Restraint