×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Special Order Custom Clips and Connectors 

Simpson Strong-Tie can make a variety of flat and bent steel clips and connectors for cold-formed steel framing. Most custom clips can be punched with different holes and slots.

Material

  • 229 mil (3 ga.) maximum, 33 mil (20 ga.) minimum mill-certified steel (carbon and Type 316L stainless steel)

Finish

  • Galvanized (G90), Simpson Strong-Tie gray paint.

Ordering Information

Specification Example
Quantity: XX pieces
Dimensions:
Per the attached CAD drawing (.dwg or .dxf format)
Drawing must be fully dimensioned, including:

  • Overall dimensions
  • Leg dimensions
  • Bend angles (if required)
  • Hole/slot sizes and centerlines (if required)

Material Specification: Contact Simpson Strong‑Tie for availability
Thickness: 54 mil (16 ga.)
Strength:
Min. Yield Strength (Fy) = 33 ksi, Min. Tensile Strength (Fu) = 45 ksi
Finish: Galvanized (G90)

To Obtain a Quote

  • Supply a CAD drawing in .dwg or .dxf format complete with all dimensions, hole diameter and centerline locations, bend angles, steel strength (min. Fy and Fu), thickness (mil and/or ga.) and finish: (galvanized to G90, G185) or Simpson Strong‑Tie gray paint (specify)
  • Total shape and size up to a maximum of 48" x 48" (approx. 1/16" tolerance)
  • Simpson Strong‑Tie does not provide product engineering or load values for special-order custom clips and connectors
  • Contact Simpson Strong‑Tie for pricing information
  • For additional information, please refer to Important Information and General Notes

Related Literature

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT