USA / Canada | Change Location...
Select One of Our Sites
North America
Asia
Oceania
Other Locations
Europe
www.strongtie.com
CHC Component Hoist Clip
The new CHC component hoist clip provides a tested, load-rated solution for the safe lifting and placement of assembled wood components. The CHC is load-rated with Strong-Drive® SDS screws for easy installation and removal, and superior shear and withdrawal strength during lifting.
Features:
- Attaches easily to wood members using Strong-Drive SDS screws (sold separately)
- May be used alone or in pairs for increased load
- Tested in multiple load directions for versatility
Material: 12 gauge.
Finish: Galvanized
Installation:
- Use all specified fasteners. See General Notes.
- Use all specified fasteners. Fasteners require full penetration into the framing members.
- Use one time only.
- Lifting devices should be connected to the CHC with a closed-loop attachment of sufficient strength to carry the allowable load.
 |
roll over images below to see larger image | |||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||
Single Part Allowable Loads
- Allowable loads are based on the lowest ultimate test load of 3 test specimens, or the average of 6 specimens, divided by 5.
- No load duration increase allowed.
- Allowable loads are based on installation over sheathing on stud walls with double 2x top plates and max. 5/8" sheathing.
- Fasteners require full penetration into the framing members.
- All lifting devices and spreader bars that are used in conjuction with the CHC shall be of sufficient strength to carry the required load. Spreader bars must also have sufficient rigidity to resist bending of the lifted component.
Allowable Loads for Two Parts
next 
top Code Reports (PDFs): | Legacy Reports | |||||||
| IAPMO UES ER | ICC-ES ESR | CITY OF LOS ANGELES | STATE OF FLORIDA | ICC-ES NER | ICC-ES ER | ICC-ES ES | |
| CHC | No code listing. Please contact us for test data. | ||||||
next topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.
ORTHOGRAPHIC | PERSPECTIVE | |
| CHC | None for this model | None for this model |
|
|
||