DBT1Z Deck-Tie® Connectors

The DBT1Z deck-board tie provides a nail-free surface fastening system for deck boards. Eliminates countersinking, hammer dents, nail popping, ugly nail heads and rust stains on surface. Leaves an unbroken deck surface that is easy to sand and refinish when it’s time for maintenance.

DBT1Z Discontinued

The DBT1Z Deck-Tie® is no longer available. Simpson Strong-Tie recommends substituting EB-TY for this item. Click here for information on the EB-TY.

See the Simpson Strong-Tie Deck Center for other options on attaching deck boards.

Material: 18 gauge

Finish: ZMAX® coating; see Corrosion Information.

Installation:

Use specified HDG fasteners. See General Notes.
DBT1Z Deck Board Tie: Position the DBT1Z with the locator prongs and install with a single 10dx1 1/2" HDG nail. Other edge of deck board shall be toenailed (see drawing). Using dry lumber will minimize deck board movement after installation. Works with 2x deck boards, 5/4 deck boards (pre-drilling may be required), or composite deck boards a minimum 1" thick (pre-drilling may be required). To check number of DBT1Z multiply number of joists by number of deck boards. The DBT1Z will not prevent cupping, bowing or warping of deck boards.
1 box of 50 covers approximately 25 sq. ft. based on 6" deck boards on joists spaced at 16" on center.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
DBT1Z		ESR-2614 / ESR-2523 *		FL10865
DBTZ	See specific model numbers for code listings.

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

	ORTHOGRAPHIC	PERSPECTIVE
DBT1Z	None for this model	None for this model
DBTZ	None for this model	None for this model