EGQ High Capacity Hanger

EGQ hanger is a high capacity top flange connector designed for use with Structural Composite Lumber beams. It utilizes Simpson Strong-Tie® Strong-Drive® screws (SDS) for higher capacity and ease of installation. Available in standard SCL widths and made to specified heights. SDS screws are included.

Material: Top flange—3 gauge; Stirrups—7 gauge

Finish: Simpson Strong-Tie gray paint; HDG available. Contact Simpson Strong-Tie.

Installation:

Use all specified fasteners. See General Notes.
Install with Simpson code recognized SDS 1/4" x 3" wood screws, which are provided with the EGQ. (Lag screws will not achieve the same load)
All multiple members must be fastened together to act as a single unit.
Multiple member headers may require additional fasteners at hanger locations. Quantity and location to be determined by designer. See SDS section for additional information, and SDS screws applications.

Options:

See Hanger Options

Loads are based on 750 psi wood bearing for SCL.
"Min H" is the minimum H dimension that may be specified.
Uplift loads have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading such as in cantilever construction use an uplift value of 4800 lbs.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
EGQ	See specific model numbers for code listings.
EGQ3.62-SDS3		ESR-2615 / ESR-2523 *
EGQ5.50-SDS3		ESR-2615 / ESR-2523 *
EGQ7.25-SDS3		ESR-2615 / ESR-2523 *

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson Strong-Tie™ AutoCad® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
EGQ	None for this model	EGQ: DWG \| DXF
EGQ3.62	None for this model	None for this model
EGQ5.50	None for this model	None for this model
EGQ7.25	None for this model	None for this model