www.strongtie.com


>>Home   > All Products - Alphabetical List

HSS/SS Stud Shoes


top

Installation

View step-by-step installation instructions

Stud Shoes reinforce studs notched in construction. They are NOT a total replacement of removed material. Installs over pipe up to 2 3/8" outside diameter.

HSS2-3 is designed for triple 2x studs.

HSS Stud Shoes provide tension load capacity as well as increased compression loads. Flared flange provides greater strength.

Material: 16 gauge.

Finish: Galvanized

Installation:

Codes: Also see Code Reports.


top Gallery:
  roll over images below to see larger image
 
HSS
US Patent 6,176,057		 HSS2-3
Step 1
Install HSS (HSS2-3 shown) over stud with flanges bent at a 90° angle. 		Step 2
Bend HSS (HSS2-3 shown) flanges one time only. Screw into position.
SS Left: Typical SS3 Installation
Right: Typical SS1.5 Installation

top Load Table: See code report listings below
Table
  1. Roof loads are 125% of floor loads unless limited by other criteria. Floor loads may be adjusted for other load durations according to the code, provided they do not exceed roof loads.
  2. NAILS: 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long.
    See other nail sizes and information.
next  top Code Reports (PDFs):
Legacy Reports
  IAPMO UES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
HSSSee specific model numbers for code listings.
HSS2-2-SDS3  ESR-2608 / ESR-2523 *   FL10864      
HSS2-3-SDS3  ESR-2608 / ESR-2523 *   FL10864      
HSS2-SDS1.5  ESR-2608 / ESR-2523 *   FL10864      
HSS4-SDS3  ESR-2608 / ESR-2523 *   FL10864      
SSSee specific model numbers for code listings.
SS1.5  ESR-2608 / ESR-2523 *   FL10864      
SS2.5  ESR-2608 / ESR-2523 *   FL10864      
SS3  ESR-2608 / ESR-2523 *   FL10864      
SS4.5  ESR-2608 / ESR-2523 *   FL10864      

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
HSSNone for this model None for this model
HSS2 HSS2: DWG | DXF
HSS2 front view: DWG | DXF
HSS2 left view: DWG | DXF
HSS2 right view: DWG | DXF
HSS2 top view: DWG | DXF
HSS2: DWG | DXF
HSS2-2 HSS2-2: DWG | DXF
HSS2-2 front view: DWG | DXF
HSS2-2 left view: DWG | DXF
HSS2-2 right view: DWG | DXF
HSS2-2 top view: DWG | DXF
None for this model
HSS2-3 HSS2-3: DWG | DXF
HSS2-3 front view: DWG | DXF
HSS2-3 left view: DWG | DXF
HSS2-3 right view: DWG | DXF
HSS2-3 top view: DWG | DXF
HSS2-3 Front View: DWG | DXF
HSS2-3 Rear View: DWG | DXF
HSS4 HSS4: DWG | DXF
HSS4 front view: DWG | DXF
HSS4 left view: DWG | DXF
HSS4 right view: DWG | DXF
HSS4 top view: DWG | DXF
None for this model
SSNone for this model None for this model
SS1.5 SS1.5: DWG | DXF
SS1.5 front view: DWG | DXF
SS1.5 right view: DWG | DXF
SS1.5 top view: DWG | DXF
None for this model
SS2.5 SS2.5: DWG | DXF
SS2.5 front view: DWG | DXF
SS2.5 right view: DWG | DXF
SS2.5 top view: DWG | DXF
None for this model
SS3 SS3: DWG | DXF
SS3 front view: DWG | DXF
SS3 right view: DWG | DXF
SS3 top view: DWG | DXF
SS3: DWG | DXF
SS4.5 SS4.5: DWG | DXF
SS4.5 front view: DWG | DXF
SS4.5 right view: DWG | DXF
SS4.5 top view: DWG | DXF
SS4.5: DWG | DXF

   
top
Order free catalogs by mail
C-2013 (Wood Construction Connectors), page 205
top
Miscellaneous Connectors (Wood Construction)
Do-It-Yourself Products (Wood Construction)
top
top
Fliers (PDFs):
top
Need help with downloads?
Printed from
© 2013 Simpson Strong-Tie Company Inc.