• Load Table
• Hanger Options
• Gallery of images
• Code Reports
• Drawings
• Catalog Page
• Anchoring Solutions
• Technical Bulletins
• Fliers
• Help for downloads

See Hanger Options for hanger modifications, which may result in reduced loads.

HU/HUC - Most models have triangle and round holes. To achieve maximum loads, fill both round and triangle holes with common nails.

HGUS - Face mount hanger used for high load applications. All hangers in this series have double shear nailing. This patented innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of common nails for all connections. (Do not bend or remove tabs)

Material: See tables.

Finish: Galvanized. Some products available in ZMAX® coating; see Corrosion Information.

Installation:

• Use all specified fasteners. See General Notes.
• HU/HUC - can be installed filling round holes only, or filling round and triangle holes for maximum values.
• HGUS - Nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
• With 3x carrying members, use 16d x 2 1/2" (0.162" dia. x 2 1/2" long) nails into the header and 16d commons into the joist with no load reduction. With 2x carrying members, use 10d x 1 1/2" (0.148" dia. x 1 1/2" long) nails into the header and 10d commons into the joist, and reduce the load to 0.64 of the table value.
• See more on installations to masonry or concrete.

• HU hangers available with the header flanges turned in for 2 5/16" and larger widths, with no load reduction - order HUC hanger.
• See Hanger Options for sloped and/or skewed HU models, and HUC (concealed flange) models.
• Concealed flanges are not available for HGUS.
• Other sizes available; consult Simpson.
• See also HUS series.