J/JP Floor Beam Levelers

www.strongtie.com

>>Home > All Products - Alphabetical List

Print this page

Email this page to a friend

Jack piers and standard floor beam levelers offer unique leveling simplicity during and after construction.

Material: 12 gauge plates, 3/4" threaded rod, 1 1/16" O.D. steel pipe

Finish: None. Connectors installed in damp areas, or corrosive environments that are not exposed to rain or periodic washing, will deteriorate at a faster rate. Corrosion-resistant finishes and maintenance can improve the connector's service life.

Installation:

Use all specified fasteners. See General Notes.
Holes are provided for installation with 4-10dx1 1/2" nails.
Do not use J/JPs for dynamic jacking of structures, such as houses.

top Gallery:

roll over images below to see larger image


J Floor Beam Leveler		Two Methods of JP44 Installation

top Load Table: See code report listings below

Consider allowable loads for 4x4 post.
Loads may not be increased for short-term loading.
NAILS: 10dx1 1/2 = 0.148" dia. x 1 1/2" long. See other nail sizes and information.

top Code Reports (PDFs):

				Legacy Reports
	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
J	See specific model numbers for code listings.
J57		RR25119	FL474	NER-413	ER-5672
J813		RR25119	FL474	NER-413	ER-5672
JP	See specific model numbers for code listings.
JP44		RR25119	FL474	NER-413	ER-5672

top

Drawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."

Download the Simpson AutoCad Menu

DWG
Perspective

DXF
Perspective

top

Mainline Catalog Pages (PDFs):

Order free catalogs by mail

C-2008 (Wood Construction Connectors), page 173 (318k)

top

Related Categories:

Post/Column Bases (Wood Construction)

top

Need help with downloads?

Printed from