www.strongtie.com


>>Home   > All Products - Alphabetical List

MBHU Masonry Beam Hangers


The MBHU beam hanger provides a face-mounted solution for connecting beams to masonry or concrete walls. A non-welded, one-piece connector, the MBHU is suitable for solid sawn and engineered wood beams as well as trusses. Installation is simplified because the Titen HD® screw anchor and Strong-Drive® SDS screws are included with the hanger. Since the Titen HD anchor is installed after the wall is built, locating the anchor in the right spot is easier than with cast-in-place bolts.

Material: 10 gauge

Finish: Galvanized

Installation:


top Gallery:
  roll over images below to see larger image
 
MBHU Typical MBHU Installation SDS 1/4"x2 1/2" Titen HD® 3/4"x5" screw anchor
 
Installation at Outside Corner
(Minimum Load)
Installation Away from Edge of Wall
(Maximum Load)
Installation on Edge of Wall
(Minimum Load)
 
top Dimensions:
Table
  1. Each MBHU hanger includes (2) 3/4"x5" Titen HD® anchors and (12) 1/4"x2 1/2" Strong-Drive® SDS screws.
top Load Table: See code report listings below
Table
  1. Uplift loads have been increased for wind or earthquake loading with no further increase allowed; reduce where other loads govern.
  2. Minimum CMU compressive strength f'm shall be 1500 psi and concrete compressive strength f'c shall be 2500 psi.
  3. Structural composite lumber (SCL) shall have a minimum specific gravity of 0.5.
  4. Allowable loads only apply to installation on 8" nominal grouted CMU walls, with minimum one horizontal #5 rebar located in the top course.
  5. Products shall be installed such that the Titen HD® anchors are not exposed to the weather.
  6. Allowable loads are based upon the tested ultimate load with a safety factor of 3.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO UES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
MBHU3.56See specific model numbers for code listings.
MBHU3.56/11.25KT      FL13904      
MBHU3.56/11.88KT      FL13904      
MBHU3.56/14KT      FL13904      
MBHU3.56/16KT      FL13904      
MBHU3.56/18KT      FL13904      
MBHU3.56/9.25KT      FL13904      
MBHU5.50See specific model numbers for code listings.
MBHU5.50/11.25KT      FL13904      
MBHU5.50/11.88KT      FL13904      
MBHU5.50/14KT      FL13904      
MBHU5.50/16KT      FL13904      
MBHU5.50/18KT      FL13904      
MBHU5.50/9.25KT      FL13904      



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
MBHU3.56 MBHU3.56: DWG | DXF
MBHU3.56 front view: DWG | DXF
MBHU3.56 left view: DWG | DXF
MBHU3.56 right view: DWG | DXF
MBHU3.56 top view: DWG | DXF
None for this model
MBHU3.56/11.25KTNone for this model None for this model
MBHU3.56/11.88KTNone for this model None for this model
MBHU3.56/14KTNone for this model None for this model
MBHU3.56/16KTNone for this model None for this model
MBHU3.56/18KTNone for this model None for this model
MBHU3.56/9.25KTNone for this model None for this model
MBHU5.50 MBHU5.50: DWG | DXF
MBHU5.50 front view: DWG | DXF
MBHU5.50 left view: DWG | DXF
MBHU5.50 right view: DWG | DXF
MBHU5.50 top view: DWG | DXF
None for this model
MBHU5.50/11.25KTNone for this model None for this model
MBHU5.50/11.88KTNone for this model None for this model
MBHU5.50/14KTNone for this model None for this model
MBHU5.50/16KTNone for this model None for this model
MBHU5.50/18KTNone for this model None for this model
MBHU5.50/9.25KTNone for this model None for this model

   
top
Order free catalogs by mail
top top
Printed from
© 2014 Simpson Strong-Tie Company Inc.