MSCPT Multiple Truss Hangers

The MSCPT is a high capacity, top flange welded hanger designed to carry 2 or 3 trusses in a terminal hip installation. The top flange is notched at the center to accommodate vertical and diagonal web members in the girder truss.

Material: Top flange - 3 gauge; stirrup - 11 gauge (MSCPT2, MSCPT2N), 7 gauge (MSCPT2-2, MSCPT2-2N).

Finish: Simpson Strong-Tie® gray paint.

Installation:

Use all specified fasteners. See General Notes.
The total load must be evenly distributed about the centerline to avoid eccentric loading.
All multiple members must be fastened together to act as a single unit.
Minimum vertical carrying member sizes are 2x6 for MSCPT2 and MSCPT2N, and 2x8 for MSCPT2-2 and MSCPT2-2N.
Minimum carrying member bottom chord is a 2-ply 2x6..

Options:

H₁ and H₂ may be increased for alignment with larger bottom chords.
Hip stirrups can be skewed from 25° to 45°.
The W₁ and W₂ of the MSCPT2 may be increased up to 3 7/16", provided the stirrups' configuration remains symmetrical.

For MSCPT2 and MSCPT2-2 models, allowable hip loads are 0.40 x Total Loads, and Jack Loads are 0.20 x Total Loads.
Uplift loads include a 60% increase for wind or earthquake loading, with no further increase allowed; reduce where other loads govern.
Wind (160) is a download rating.
NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long. See other nail sizes and information.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
MSCPT	See specific model numbers for code listings.
MSCPT2				FL11468
MSCPT2-2				FL11468
MSCPT2-2N				FL11468
MSCPT2N				FL11468

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
MSCPT	None for this model	None for this model
MSCPT2	None for this model	MSCPT2: DWG \| DXF
MSCPT2-2	None for this model	None for this model
MSCPT2-2N	None for this model	None for this model
MSCPT2N	None for this model	None for this model