MSTAM/MSTCM Strap Ties

www.strongtie.com

MSTAM and MSTCM models are designed for wood to masonry applications.

The MSTC series has countersunk nail slots for a lower nailing profile.

Finish: Galvanized. Some products are available in stainless steel or ZMAX® coating; see Corrosion Infromation.

Installation:

roll over images below to see larger image

Loads include a 60% load duration increase on the fasteners for wind or earthquake loading.
Minimum edge distance 1 1/2" using Titen^® screws.
Minimum f'_m = 1500 psi and f'_c = 2500 psi.
Products shall be installed such that the Titen screws are not exposed to the weather.
See Titen screw information.
NAILS: 16d Sinker = 0.148" dia. x 3 1/4" long, 10d = 0.148" dia. x 3" long. See other nail sizes and information.

See notes above.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
MSTAM	See specific model numbers for code listings.
MSTAM24				FL11473
MSTAM36				FL11473
MSTCM	See specific model numbers for code listings.
MSTCM40	No code listing: Please contact us for test data.
MSTCM60				FL11473

topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
MSTAM	None for this model	None for this model
MSTAM24	MSTAM24: DWG \| DXF	High Wind-Resistant Construction D45: Floor to Masonry/Concrete: DWG \| DXF
MSTAM36	MSTAM36: DWG \| DXF	High Wind-Resistant Construction D28: Truss/Rafter Hip To End Wall: DWG \| DXF
MSTCM	None for this model	None for this model
MSTCM40	None for this model	None for this model
MSTCM60	None for this model	None for this model

Order free catalogs by mail

Printed from