RP6 Retro Plate

Select One of Our Sites

North America

Asia

Oceania

Other Locations

Europe

www.strongtie.com

RP6 Retro Plate

The RP6 retrofit plate fits on the outside of masonry buildings, and helps tie the walls to the roof or floor structure with a 3/4" diameter rod.

Finish: Simpson Strong-Tie® gray paint. Optional hot-dip galvanized coating; see Corrosion Information, and specify HDG.

Material: 3/8" steel. Available with additional corrosion protection. Check with Simpson Strong-Tie.

Installation: Use a 3/4" diameter rod. A 5/8" diameter rod requires an additional standard cut washer under the nut.

roll over images below to see larger image

					Legacy Reports
	IAPMO UES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
RP6	No load capacity: Products not tested or submitted because they’re not load rated and code approval not required.

topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."

Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
RP6	RP6: DWG \| DXF RP6 front view: DWG \| DXF RP6 top view: DWG \| DXF	RP6: DWG \| DXF