SUR/SUL/HSUR/HSUL Skewed 45° Hangers

HSULC Available for 2-2x and 4x models only

Typical SUR410 Installation

Typical SUR Installation with Square Cut Joist (HSUR similar)

Typical SUL Installation with Square Cut Joist
(HSUL similar)

Installation

View step-by-step installation instructions

The SU and HSU series of hangers are skewed 45 ° left or right. Angled nail slots direct nails for proper installation.

Material:

SUR and SUL - 16 gauge
HSUR and HSUL - 14 gauge

Finish: Galvanized. Some products available in stainless steel or ZMAX® coating; see Corrosion Information.

Installation:

Use all specified fasteners. See General Notes.
These hangers will normally accommodate a 40° to 50° skew.
Illustration shows left and right skews SUR/L (SUR=skewed right; SUL=skewed left).
The joist end may be square cut or bevel cut.
See HU/HUC/HSURL for installations to concrete/masonry walls.

Options:

Available with the A2 flange turned in on the 2-2x and 4x models only (see illustration).
To order, add "C" (for concealed) to the product name.
For example, specify HSURC46, HSULC46, SURC46, or SULC46.

roll over images below to see larger image

Uplift loads have been increased by 60% for wind or earthquake loading with no further increase allowed; reduce
where other loads govern.
Roof loads are 125% of floor loads unless limited by other criteria.
Truss chord cross-grain tension may limit allowable loads. Refer to Technical Bulletins T-ANSITPISPF, T-ANSITPISP and T-ANSITPIDF for allowable loads that consider ANSI/TPI 1-2007 wood member design criteria.
NAILS: 16d = 0.162" dia. x 3 1/2" long, 16dx2 1/2 = 0.162" dia. x 2 1/2" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long.
See other nail sizes and information.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
HSUL	See specific model numbers for code listings.
HSUL210-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
HSUL214-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
HSUL26-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
HSUL36	No code listing: Please contact us for test data.
HSUL410		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSUL414		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSUL46		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSULC	No code listing: Please contact us for test data.
HSUR	See specific model numbers for code listings.
HSUR210-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
HSUR214-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
HSUR26-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
HSUR36	No code listing: Please contact us for test data.
HSUR410		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSUR414		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
HSUR46		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
SUL	See specific model numbers for code listings.
SUL2.56/11		ESR-2552 / ESR-2523 *
SUL2.56/9		ESR-2552 / ESR-2523 *
SUL210		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL210-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL210-2Z		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL210Z		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL214		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL214-2	No code listing: Please contact us for test data.
SUL24		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL26		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL26-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL26Z		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUL310		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUL314		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUL410		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUL414		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801	FL10655 / FL10531
SUL46	No code listing: Please contact us for test data.
SUR	See specific model numbers for code listings.
SUR2.56/11		ESR-2552 / ESR-2523 *
SUR2.56/9		ESR-2552 / ESR-2523 *
SUR210		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR210-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR210-2Z		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR210Z		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR214		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR214-2	No code listing: Please contact us for test data.
SUR24		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR26		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR26-2		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR26Z		ESR-2549 / ESR-2523 *	RR25807	FL10655
SUR310		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUR314		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUR410		ESR-2552 / ESR-2523 *	RR25801	FL10531
SUR414		ESR-2549 / ESR-2552 / ESR-2523 *	RR25801 / RR25807	FL10655 / FL10531
SUR46	No code listing: Please contact us for test data.

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
HSUL	None for this model	None for this model
HSUL210-2	None for this model	None for this model
HSUL214-2	None for this model	None for this model
HSUL26-2	None for this model	None for this model
HSUL36	None for this model	None for this model
HSUL410	HSUL410: DWG \| DXF HSUL410 front view: DWG \| DXF HSUL410 right view: DWG \| DXF HSUL410 top view: DWG \| DXF	None for this model
HSUL414	None for this model	None for this model
HSUL46	None for this model	None for this model
HSULC	None for this model	None for this model
HSUR	None for this model	None for this model
HSUR210-2	None for this model	None for this model
HSUR214-2	None for this model	None for this model
HSUR26-2	None for this model	None for this model
HSUR36	None for this model	None for this model
HSUR410	HSUR410: DWG \| DXF HSUR410 front view: DWG \| DXF HSUR410 left view: DWG \| DXF HSUR410 top view: DWG \| DXF	None for this model
HSUR414	None for this model	None for this model
HSUR46	None for this model	None for this model
SUL	None for this model	SUL With Square Cut Joist: DWG \| DXF
SUL2.56/11	None for this model	None for this model
SUL2.56/9	None for this model	None for this model
SUL210	SUL210: DWG \| DXF SUL210 front view: DWG \| DXF SUL210 right view: DWG \| DXF SUL210 top view: DWG \| DXF	None for this model
SUL210-2	SUL210-2: DWG \| DXF SUL210-2 front view: DWG \| DXF SUL210-2 right view: DWG \| DXF SUL210-2 top view: DWG \| DXF	None for this model
SUL214	None for this model	None for this model
SUL214-2	None for this model	None for this model
SUL24	SUL24: DWG \| DXF SUL24 front view: DWG \| DXF SUL24 right view: DWG \| DXF SUL24 top view: DWG \| DXF	None for this model
SUL26	SUL26: DWG \| DXF SUL26 front view: DWG \| DXF SUL26 right view: DWG \| DXF SUL26 top view: DWG \| DXF	None for this model
SUL26-2	SUL26-2: DWG \| DXF SUL26-2 front view: DWG \| DXF SUL26-2 right view: DWG \| DXF SUL26-2 top view: DWG \| DXF	None for this model
SUL310	None for this model	None for this model
SUL314	None for this model	None for this model
SUL410	SUL410: DWG \| DXF SUL410 front view: DWG \| DXF SUL410 right view: DWG \| DXF SUL410 top view: DWG \| DXF	None for this model
SUL414	SUL414: DWG \| DXF SUL414 front view: DWG \| DXF SUL414 right view: DWG \| DXF SUL414 top view: DWG \| DXF	None for this model
SUL46	None for this model	None for this model
SUR	None for this model	SURWith Square Cut Joist: DWG \| DXF
SUR2.56/11	None for this model	None for this model
SUR2.56/9	None for this model	None for this model
SUR210	SUR210: DWG \| DXF SUR210 front view: DWG \| DXF SUR210 left view: DWG \| DXF SUR210 top view: DWG \| DXF	None for this model
SUR210-2	SUR210-2: DWG \| DXF SUR210-2 front view: DWG \| DXF SUR210-2 left view: DWG \| DXF SUR210-2 top view: DWG \| DXF	None for this model
SUR214	None for this model	None for this model
SUR214-2	None for this model	None for this model
SUR24	SUR24: DWG \| DXF SUR24 front view: DWG \| DXF SUR24 left view: DWG \| DXF SUR24 top view: DWG \| DXF	None for this model
SUR26	SUR26: DWG \| DXF SUR26 front view: DWG \| DXF SUR26 left view: DWG \| DXF SUR26 top view: DWG \| DXF	None for this model
SUR26-2	None for this model	None for this model
SUR310	None for this model	None for this model
SUR314	None for this model	None for this model
SUR410	SUR410: DWG \| DXF SUR410 front view: DWG \| DXF SUR410 left view: DWG \| DXF SUR410 top view: DWG \| DXF	None for this model
SUR414	SUR414: DWG \| DXF SUR414 front view: DWG \| DXF SUR414 left view: DWG \| DXF SUR414 top view: DWG	None for this model
SUR46	None for this model	None for this model