AnchorMate Anchor Bolt Holders

AnchorMate® Anchor Bolt Holder
U.S. Patent 6,065,730

Typical AnchorMate Installation for a 2x6 mudsill

Typical AnchorMate Installation for a 2x4 mudsill

www.strongtie.com

AnchorMate^® Anchor Bolt Holders

Designed to hold the anchor in place before the concrete pour, as required in some jurisdictions.

Built-in 2x4 and 2x6 stops eliminate measuring.
Elevated bolt grippers allow easy trowel finishing.
Color-coded for easy size identification.
Lightweight, durable and easy to use.
Reusable yet cost-efficient for single application.
Threaded grippers hold each bolt in the exact same location and height. They secure bolt in place without a nut for quicker set-up and tear-down, and protect threads from splashing concrete.
Use the 5/8" and 7/8" AnchorMate to secure the SSTB to the formboard before the concrete pour. Alignment arrows (left or right) match the SSTB bolt head arrow.
Available in cartons of 100 parts with a flip-top lid for easy access or bags of 10 parts. (except AM1 which are only available in cartons of 100 parts).

Material: Nylon.

roll over images below to see larger image

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
AM	See specific model numbers for code listings.
AM1	No code listing. Please contact us for test data.
AM1/2	No code listing. Please contact us for test data.
AM3/4	No code listing. Please contact us for test data.
AM5/8	No code listing. Please contact us for test data.
AM7/8	No code listing. Please contact us for test data.

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
AM	None for this model	Typical AnchorMate Installation for a 2x4 mudsill: DWG \| DXF Typical AnchorMate Installation for a 2x6 mudsill: DWG \| DXF
AM1	None for this model	None for this model
AM1/2	None for this model	None for this model
AM3/4	None for this model	None for this model
AM5/8	None for this model	None for this model
AM7/8	None for this model	None for this model

Order free catalogs by mail

Fliers (PDFs):

Printed from