×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

DTT™ Deck Tension Tie

Deck Connectors

This product's information may differ depending on the category of use. You are currently viewing details related to Deck Connectors. You can also view product information related to the category: SDS Screw Holdowns

DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load rated as a holdown for light-duty shearwalls and braced-wall panel applications.

For new construction or to make an existing deck code-compliant, the DTT1Z can be used as a tension tie to satisfy the 2015, 2018 and 2021 IRC provision for a 750 lb. lateral load connection to the house at four locations per deck. This code detail permits the lateral connection from the deck joists to be made to top plates, studs or headers within the supporting structure, which eliminates the need to access to the floor joists inside the home. The DTT1Z is available in a kit (DTT1Z-KT) that includes (4) DTT1Z connectors, (4) Strong-Drive® SDWH Timber-Hex HDG screws (SDWH27800G) and (26) #9 x 1 1/2" Strong-Drive SD Connector screws.

The DTT1Z fastens to the narrow or wide face of a single 2x with Strong-Drive SD Connector screws or nails and accepts a 3/8" bolt, anchor bolt or lag screw (washer required) or can be installed with the Strong-Drive SDWH Timber-Hex HDG screw with an integral washer.

The DTT2 can be used to satisfy the IRC provision for a 1,500 lb. lateral load connection at two locations per deck. Additionally, the DTT2 has been tested and evaluated in deck guardrail post applications to resist the code-specified lateral forces at the top of railing assemblies. The DTT2 is also available with longer 2 1/2" Strong-Drive SDS Heavy-Duty Connector screws (model DTT2Z-SDS2.5) to achieve higher loads when needed. The DTT2 fastens easily to the wide face of a single or double 2x using Strong-Drive SDS Heavy-Duty Connector screws (included) and accepts a 1/2"-diameter bolt or anchor bolt.

For guard post installations using Strong-Drive SDWS Timber screws, see technical bulletin Guard Post, Guard Rail and Baluster Installations Using Strong-Drive® Structural Fasteners (T-F-GRDPSTRL).

Material

  • 14 gauge

Finish

  • DTT1Z/DTT2Z — ZMAX® coating; DTT2SS — stainless steel; see Corrosion Information

Installation

  • Use all specified fasteners; see General Notes
  • A standard cut washer (included for DTT2) must be installed between the nut and the seat
  • Strong-Drive SDS Heavy-Duty Connector screws (SDS) install best with a low-speed high-torque drill with a 3/8" hex-head driver (Model BITHEXR38-R1)
  • Strong-Drive SD Connector screws (SD) install with a 1/4" hex-head driver
  • Strong-Drive SDWH Timber-Hex HDG screws install with a 3/8" hex-head driver (Model BITHEXR38-R1)

Patent Information

  • US Patents 8,555,580; 10,865,558

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Ga. W (in.) H (in.) B (in.) CL (in.) SO (in.) Coating/Material Product Includes Packaging Qty.
DTT1Z 14 1 1/2 7 1/8 1 7/16 3/4 3/16 ZMAX® - 1
DTT1Z-KT 14 1 1/2 7 1/8 1 7/16 3/4 3/16 ZMAX® Includes (4) DTT1Z connectors, (4 )Strong-Drive® SDWH Timber-Hex HDG screws and (26) SD #9 x 1-1/2 in. screws 4
DTT2SS 14 3 1/4 6 15/16 1 5/8 13/16 3/16 Stainless Steel Includes 1/4 in. x 1-1/2 in. Strong-Drive® SDS Heavy-Duty Connector screws 1
DTT2SS-SDS2.5 14 3 1/4 6 15/16 1 5/8 13/16 3/16 Stainless Steel Includes 1/4 in. x 2-1/2 in. Strong-Drive® SDS Heavy-Duty Connector screws 1
DTT2Z 14 3 1/4 6 15/16 1 5/8 13/16 3/16 ZMAX® Includes 1/4 in. x 1-1/2 in. Strong-Drive® SDS Heavy-Duty Connector screws 1
DTT2Z-R2 14 3 1/4 6 15/16 1 5/8 13/16 3/16 ZMAX® Includes 1/4 in. x 1-1/2 in. Strong-Drive® SDS Heavy-Duty Connector screws 2
DTT2Z-SDS2.5 14 3 1/4 6 15/16 1 5/8 13/16 3/16 ZMAX® Includes 1/4 in. x 2-1/2 in. Strong-Drive® SDS Heavy-Duty Connector screws 1

Load Tables

    These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

    For stainless-steel fasteners, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

    Many of these products are approved for installation with Strong-Drive® SD Connector screws.

DTT Deck Tension Ties Load Table
  1. Allowable loads have been increased for wind or earthquake loading with no further increase allowed. Reduce where other loads govern.
  2. DTT1Z installations with allowable loads below 750 lb. do not satisfy the 2015/2018/2021 IRC requirements for deck-to-house lateral load connections.
  3. The Strong-Drive® SDWH Timber-Hex HDG screw with a minimum of 3" thread penetration into dry lumber has an allowable withdrawal load (160) of 1,380 lb. into SP, 1225 lb. into DF, and 1,020 lb. into SPF/HF.
  4. Load values are valid if the product is flush with the end of the framing member or installed away from the end.
  5. The guardrail post illustration above addresses an outward force on the guardrail. An additional DTT2Z can be added at the lower bolt to address an inward force.
  6. A 3/8" HDG round washer is required with the use of a lag screw.
  7. Fasteners: Nail dimensions in the table are diameter by length. SD and SDS screws are Simpson Strong-Tie® Strong-Drive® screws. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT