Hanger Options Matrix

Height For Sloped Hangers

Height 1 (H1) is the joist height before the slope cut has been made.

Net Height (Net H) is the joist height after the slope cut has been made.

Provide H1 when ordering a connector. Connectors are made assuming dry lumber is being used in continuously dry conditions.

Simpson Strong-Tie will calculate Net H dimension based on the mathematical formula of H1 / cos angle.

	MODIFICATIONS											FEATURES
BASE MODEL SERIES	Skewed Seat (Max)	Sloped Seat (Max)	Skewed & Sloped Seat	Slope Top Flange	Open Top Flange	Closed Top Flange	Offset Top Flange	Saddle Hanger	Ridge Hanger	Concealed Flange	Non-Backed (Backing reduces possible hanger rotation)	Uplift	Weld- ability	Bevel Cut Joist	Square (Butt) Cut Joist
B	45°	45°	•	•	•	•		•			•	•	•	•
EG	45°	45°												•
GB		45°						•				•	•	•
GH	45°							•						•
GLS	50°	45°	•	•			•	•				•	•
GLT/GLTV	50°	45°	•	•			•				•	•	•	•
HB	45°	45°	•	•	•	•		•			•	•	•	•
HGB		45°						•				•	•	•
HGLS	50°	45°		•			•	•				•	•
HGLT/HGLTV	50°	45°		•			•				•	•	•	•
HGU										•		•
HGUS	45°											•		•	•
HHB		45°						•				•	•	•
HHGU										•		•
HHUS	45°	45°	•									•		•
HSUR/L^1,8	45°									•⁸		•		•	•
HTU	67½°											•			•
HU⁷	67½°	45°	•							•		•	•	•	•
HUS										•⁶		•
HUSTF										•
HUTF^5,7	45°	45°	•							•		•		•	•
HW³	84°	45°	•	•	•		•	•	•		•		•	•	•⁹
HWU⁴	45°	45°	•									•		•
LBV²	45°	45°	•	•	•	•		•			•	•	•	•
LEG	45°	45°					•							•
LGU										•		•
LSU/LSSU	45°	45°	•									•			•
LTHJR/L	67½°	45°	•									•			•
MBHA	45°														•
MEG	45°	45°					•							•
MGU										•		•
MSC	45°	45°	•										•		•
SUR/L^1,8	45°									•⁸		•		•