www.strongtie.com


>>Home   > All Products - Alphabetical List   >    Face Mount Hanger Tables

Face Mount Hangers Load Table for I-Joists

 
Additional Corrosion Protection

These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

  1. Uplift loads based on DF/SP lumber and have been increased for wind or earthquake loading with no further increase allowed. Reduce where other loads govern. For SPF/HF use 0.86 x DF/SP uplift load.
  2. 10d commons or 16d sinkers may be used instead of the specified 16d at 0.84 of the table load value.
  3. 16d sinkers may be used instead of the specified 10d commons with no load reduction.
  4. MIN nailing quantity and load values - fill all round holes;
    MAX nailing quantity and load values - fill all round and triangle holes.
  5. Hangers sorted in order of recommended selection for best overall performance and installation value.
  6. Web stiffeners are required where noted in the table or when either the joist top flange isn't supported laterally by the hanger or when supporting double I-joists with flanges less than 1 5/16" thick.
  7. Allowable downloads are based on a joist bearing capacity of 750 psi.
  8. NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long.
    See other nail sizes and information.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO UES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
HUSee specific model numbers for code listings.
HU210-2  ESR-2549 / ESR-2523 * RR25807 FL10531 / FL10655      
HU212-2  ESR-2549 / ESR-2523 * RR25807 FL10531 / FL10655      
HU310  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10531 / FL10655      
HU312  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10531      
HU314  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10531 / FL10655      
HU316  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10531 / FL10655      
HU3524/30  ESR-2552 / ESR-2523 * RR25801 FL10531      
HUCSee specific model numbers for code listings.
HUC210-2  ESR-2549 / ESR-2523 * RR25807 FL10531 / FL10655      
HUC212-2  ESR-2549 / ESR-2523 * RR25807 FL10531 / FL10655      
HUC310  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10531 / FL10655      
HUC312  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10531 / FL10655      
HUC314  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10531 / FL10655      
HUC316  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10531 / FL10655      
IUSSee specific model numbers for code listings.
IUS2.56/11.88  ESR-2552 / ESR-2523 * RR25801 FL10531      
IUS2.56/14  ESR-2552 / ESR-2523 * RR25801 FL10531      
IUS2.56/16  ESR-2552 / ESR-2523 * RR25801 FL10531      
IUS2.56/9.25 No code listing. Please contact us for test data.
IUS2.56/9.5  ESR-2552 / ESR-2523 * RR25801 FL10531      
IUS3.56/11.88  ESR-2552 / ESR-2523 * RR25801 FL10531      
IUS3.56/9.5  ESR-2552 / ESR-2523 * RR25801 FL10531      
MIUSee specific model numbers for code listings.
MIU2.37/18  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU2.37/20  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU2.56/11  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU2.56/14  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU2.56/16  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU2.56/18  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU2.56/20  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU2.56/9  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU3.12/11  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU3.12/9  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      
MIU3.56/9  ESR-2552 / ESR-2523 * RR25801 FL10531 / FL10854      

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson Strong-Tie® AutoCAD® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
HU HU sloped down skewed left: DWG | DXF
HU sloped down skewed right: DWG | DXF
HU sloped down: DWG | DXF
HU sloped left: DWG | DXF
HU skewed right: DWG | DXF
HU series: DWG | DXF
HU sloped up skewed left: DWG | DXF
HU sloped up skewed right: DWG | DXF
HU sloped up: DWG | DXF
HU sloped down skewed left front view: DWG | DXF
HU sloped down skewed right front view: DWG | DXF
HU sloped down front view: DWG | DXF
HU sloped left front view: DWG | DXF
HU skewed right front view: DWG | DXF
HU series front view: DWG | DXF
HU sloped up skewed left front view: DWG | DXF
HU sloped up skewed right front view: DWG | DXF
HU sloped up front view: DWG | DXF
HU skewed right left view: DWG | DXF
HU sloped down skewed left right view: DWG | DXF
HU series sloped down right view: DWG | DXF
HU sloped left right view: DWG | DXF
HU series right view: DWG | DXF
HU sloped up skewed left right view: DWG | DXF
HU sloped up skewed right right view: DWG
HU sloped up right view: DWG | DXF
HU sloped down top view: DWG | DXF
HU sloped left top view: DWG | DXF
HU skewed right top view: DWG | DXF
HU series top view: DWG | DXF
HU sloped up skewed left top view: DWG | DXF
HU sloped up skewed right top view: DWG | DXF
HU sloped up top view: DWG | DXF
HU 2x Joist: DWG | DXF
HU Glulam Joist: DWG | DXF
HU 4x Joist: DWG | DXF
U&HU Skewed: DWG | DXF
HU210-2 HU210-2: DWG | DXF
HU210-2 with top flange: DWG | DXF
HU210-2TFSKL: DWG | DXF
HU210-2TFSKR: DWG | DXF
HU210-2 front view: DWG | DXF
HU210-2 with top flange front view: DWG | DXF
HU210-2TFSKL front view: DWG | DXF
HU210-2TFSKR front view: DWG | DXF
HU210-2 left view: DWG | DXF
HU210-2 with top flange left view: DWG | DXF
HU210-2TFSKR left view: DWG | DXF
HU210-2 right view: DWG | DXF
HU210-2 with top flange right view: DWG | DXF
HU210-2TFSKL right view: DWG | DXF
HU210-2 top view: DWG | DXF
HU210-2TFSKL top view: DWG | DXF
HU210-2TFSKR top view: DWG | DXF
HU210-2 with top flange top view: DWG | DXF
None for this model
HU212-2 HU212-2: DWG | DXF
HU212-2 with top flange: DWG | DXF
HU212-2 front view: DWG | DXF
HU212-2 with top flange front view: DWG | DXF
HU212-2 left view: DWG | DXF
HU212-2 right view: DWG | DXF
HU212-2 with top flange right view: DWG | DXF
HU212-2 top view: DWG | DXF
HU212-2 with top flange top view: DWG | DXF
None for this model
HU310None for this model None for this model
HU312None for this model None for this model
HU314None for this model None for this model
HU316None for this model None for this model
HU3524/30None for this model None for this model
HUCNone for this model HUC On a Beam: DWG | DXF
HUC On a Post: DWG | DXF
HUC210-2 HUC210-2: DWG | DXF
HUC210-2SKL: DWG | DXF
HUC210-2SKR: DWG | DXF
HUC210-2 front view: DWG | DXF
HUC210-2SKL front view: DWG | DXF
HUC210-2SKR front view: DWG | DXF
HUC210-2 left view: DWG | DXF
HUC210-2SKR left view: DWG | DXF
HUC210-2 right view: DWG | DXF
HUC210-2SKL right view: DWG | DXF
HUC210-2SKL top view: DWG | DXF
HUC210-2SKR top view: DWG | DXF
HUC210-2 top view: DWG | DXF
High Wind-Resistant Construction D117: Hanger Uplift Considerations: DWG | DXF
HUC212-2None for this model None for this model
HUC310None for this model None for this model
HUC312None for this model None for this model
HUC314None for this model None for this model
HUC316None for this model None for this model
IUS IUS/11.88 Series: DWG | DXF
IUS/9.5 Series: DWG | DXF
IUS/11.88 Series front view: DWG | DXF
IUS/9.5 Series front view: DWG | DXF
IUS/11.88 Series right view: DWG | DXF
IUS/9.5 Series right view: DWG | DXF
IUS/11.88 Series top view: DWG | DXF
IUS/9.5 Series top view: DWG | DXF
IUS/ITT Tab Installation 2: DWG | DXF
IUS/ITT Tab Installation 3: DWG | DXF
IUS/ITT Tab Installation 1: DWG | DXF
IUS Installation 1: DWG | DXF
IUS Installation 2: DWG | DXF
IUS Installation 3: DWG | DXF
IUS Starburst Detail: DWG | DXF
No Web Stiffener Installed: DWG | DXF
Web Stiffener 1: DWG | DXF
Web Stiffener 2: DWG | DXF
IUS2.56/11.88None for this model None for this model
IUS2.56/14None for this model None for this model
IUS2.56/16None for this model None for this model
IUS2.56/9.25None for this model None for this model
IUS2.56/9.5None for this model None for this model
IUS3.56/11.88None for this model None for this model
IUS3.56/9.5None for this model None for this model
MIUNone for this model MIU: DWG | DXF
MIU2.37/18None for this model None for this model
MIU2.37/20None for this model None for this model
MIU2.56/11None for this model None for this model
MIU2.56/14None for this model None for this model
MIU2.56/16None for this model None for this model
MIU2.56/18None for this model None for this model
MIU2.56/20None for this model None for this model
MIU2.56/9None for this model None for this model
MIU3.12/11None for this model None for this model
MIU3.12/9None for this model None for this model
MIU3.56/9None for this model None for this model

   
top
Order free catalogs by mail
top top
Printed from
© 2014 Simpson Strong-Tie Company Inc.