USA / Canada | Change Location...
www.strongtie.com


>>Home   > All Products - Alphabetical List   >    Face Mount Hanger Tables

Face Mount Hangers Load Table for Plated Truss Products

  Code Reports

These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.
These models are approved for installation with the Strong-Drive SD Structural-Connector screw.
Table
  1. See dimensions and fastener information for LUS/MUS/HUS/HHUS/HGUS/HUSC.

Table
  1. Uplift loads have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction refer to Simpson Strong-Tie® Connector Selector® software or conservatively divide the uplift load by 1.6.
  2. Wind (160) is a download rating.
  3. Minimum heel height required for full table loads. Minimum heel height shown is required to achieve full table loads. For less than minimum heel height, see technical bulletin T-REDHEEL.
  4. Truss chord cross-grain tension may limit allowable loads in accordance with ANSI/TPI 1-2007. Simpson Strong-Tie® Connector Selector® software includes the ANSI/TPI evaluation in its hanger allowable loads. For additional information, contact Simpson Strong-Tie.
  5. Loads shown are based on minimum of 2-ply 2x carrying member. With 3x carrying members, use 16dx2 1/2" nails into the header and 16d commons into the joist with no load reduction. With single 2x carrying members, use 10dx1 1/2" nails into the header and 10d commons into the joist, and reduce the load to 0.64 of the table value.
  6. NAILS: 16d = 0.162" dia. x 3 1/2" long. See other nail sizes and information.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO ES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
HGUSSee specific model numbers for code listings.
HGUS210-2  ESR-2549 / ESR-2523 *   FL11468      
HGUS210-3  ESR-2549 / ESR-2523 *   FL11468      
HGUS210-4  ESR-2549 / ESR-2523 *   FL11468      
HGUS212-3  ESR-2549 / ESR-2523 *   FL11468      
HGUS212-4  ESR-2549 / ESR-2523 *   FL11468      
HGUS214-3  ESR-2549 / ESR-2523 *   FL11468      
HGUS214-4  ESR-2549 / ESR-2523 *   FL11468      
HGUS26      FL11468      
HGUS26-2  ESR-2549 / ESR-2523 *   FL11468      
HGUS26-3  ESR-2549 / ESR-2523 *          
HGUS26-4  ESR-2549 / ESR-2523 *   FL11468      
HGUS28      FL11468      
HGUS28-2  ESR-2549 / ESR-2523 *   FL11468      
HGUS28-3  ESR-2549 / ESR-2523 *          
HGUS28-4  ESR-2549 / ESR-2523 *   FL11468      
HGUS410  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL11468      
HGUS412  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL11468      
HGUS414  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL11468      
HGUS46  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL11468      
HGUS48  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL11468      
HHUSSee specific model numbers for code listings.
HHUS210-2  ESR-2549 / ESR-2523 * RR25807 FL10655      
HHUS210-3      FL11468      
HHUS210-4      FL11468      
HHUS212-3 No code listing. Please contact us for test data.
HHUS26-2  ESR-2549 / ESR-2523 * RR25807 FL10655      
HHUS28-2  ESR-2549 / ESR-2523 * RR25807 FL10655      
HHUS410  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10531      
HHUS46  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10531      
HHUS48  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10531      
HUSSee specific model numbers for code listings.
HUS210  ESR-2549 / ESR-2523 * RR25801 / RR25807 FL10655      
HUS214-3 No code listing. Please contact us for test data.
HUS26  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
HUS28  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
HUS48  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10447      
LUSSee specific model numbers for code listings.
LUS210  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
LUS210-2  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
LUS24  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
LUS24-2  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
LUS26  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
LUS26-2  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
LUS28  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
LUS28-2  ESR-2549 / ESR-2523 * / ESR-3096 RR25807 / RR25910 FL10655      
LUS410  ESR-2549 / ESR-2523 * RR25807 FL10655      
LUS46  ESR-2549 / ESR-2523 * RR25807 FL10655      
LUS48  ESR-2549 / ESR-2523 * RR25807 FL10655      
MUSSee specific model numbers for code listings.
MUS26  ESR-2549 / ESR-2523 * RR25807 FL10655      
MUS28  ESR-2549 / ESR-2523 * RR25807 FL10655      

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson Strong-Tie™ AutoCad® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
HGUSNone for this model None for this model
HGUS210-2 HGUS210-2: DWG | DXF
HGUS210-2SKL: DWG | DXF
HGUS210-2SKR: DWG | DXF
HGUS210-2 front view: DWG | DXF
HGUS210-2SKL front view: DWG | DXF
HGUS210-2SKR front view: DWG | DXF
HGUS210-2 left view: DWG | DXF
HGUS210-2SKR left view: DWG | DXF
HGUS210-2 right view: DWG | DXF
HGUS210-2SKL right view: DWG | DXF
HGUS210-2SKL top view: DWG | DXF
HGUS210-2SKR top view: DWG | DXF
HGUS210-2 top view: DWG | DXF
HGUS210-2 on 2x6 bottom chord: DWG | DXF
HGUS210-3None for this model None for this model
HGUS210-4None for this model None for this model
HGUS212-3None for this model None for this model
HGUS212-4None for this model None for this model
HGUS214-3None for this model None for this model
HGUS214-4None for this model None for this model
HGUS26 HGUS26: DWG | DXF
HGUS26 front view: DWG | DXF
HGUS26 right view: DWG | DXF
HGUS26 top view: DWG | DXF
None for this model
HGUS26-2 HGUS26-2: DWG | DXF
HGUS26-2 front view: DWG | DXF
HGUS26-2 left view: DWG | DXF
HGUS26-2 right view: DWG | DXF
HGUS26-2 top view: DWG | DXF
High Wind-Resistant Construction D110: Hanger Uplift Considerations: DWG | DXF
HGUS26-3None for this model None for this model
HGUS26-4None for this model None for this model
HGUS28 HGUS28: DWG | DXF
HGUS28 front view: DWG | DXF
HGUS28 left view: DWG | DXF
HGUS28 right view: DWG | DXF
HGUS28 top view: DWG | DXF
None for this model
HGUS28-2 HGUS28-2: DWG | DXF
HGUS28-2 front view: DWG | DXF
HGUS28-2 right view: DWG | DXF
HGUS28-2 top view: DWG | DXF
None for this model
HGUS28-3 HGUS28-3: DWG | DXF
HGUS28-3 front view: DWG | DXF
HGUS28-3 left view: DWG | DXF
HGUS28-3 right view: DWG | DXF
HGUS28-3 top view: DWG | DXF
None for this model
HGUS28-4None for this model None for this model
HGUS410 HGUS410: DWG | DXF
HGUS410 front view: DWG | DXF
HGUS410 left view: DWG | DXF
HGUS410 right view: DWG | DXF
HGUS410 top view: DWG | DXF
None for this model
HGUS412 HGUS412: DWG | DXF
HGUS412 front view: DWG | DXF
HGUS412 left view: DWG | DXF
HGUS412 right view: DWG | DXF
HGUS412 top view: DWG | DXF
None for this model
HGUS414 HGUS414: DWG | DXF
HGUS414 front view: DWG | DXF
HGUS414 right view: DWG | DXF
HGUS414 top view: DWG | DXF
None for this model
HGUS46None for this model None for this model
HGUS48 HGUS48: DWG | DXF
HGUS48 front view: DWG | DXF
HGUS48 left view: DWG | DXF
HGUS48 right view: DWG | DXF
HGUS48 top view: DWG | DXF
None for this model
HHUSNone for this model HHUS Skewed top view: DWG
HHUS210-2None for this model None for this model
HHUS210-3None for this model None for this model
HHUS210-4None for this model None for this model
HHUS212-3None for this model None for this model
HHUS26-2 HHUS26-2: DWG | DXF
HHUS26-2 front view: DWG | DXF
HHUS26-2 left view: DWG | DXF
HHUS26-2 right view: DWG | DXF
HHUS26-2 top view: DWG | DXF
None for this model
HHUS28-2 HHUS28-2: DWG | DXF
HHUS28-2 front view: DWG | DXF
HHUS28-2 left view: DWG | DXF
HHUS28-2 right view: DWG | DXF
HHUS28-2 top view: DWG | DXF
None for this model
HHUS410 HHUS410: DWG | DXF
HHUS410 front view: DWG | DXF
HHUS410 left view: DWG | DXF
HHUS410 right view: DWG | DXF
HHUS410 top view: DWG | DXF
None for this model
HHUS46 HHUS46: DWG | DXF
HHUS46 front view: DWG | DXF
HHUS46 left view: DWG | DXF
HHUS46 right view: DWG | DXF
HHUS46 top view: DWG | DXF
None for this model
HHUS48 HHUS48: DWG | DXF
HHUS48 front view: DWG | DXF
HHUS48 left view: DWG | DXF
HHUS48 right view: DWG | DXF
HHUS48 top view: DWG | DXF
None for this model
HUSNone for this model HUS: DWG | DXF
HUSA: DWG | DXF
HUS210 HUS210: DWG | DXF
HUS210 front view: DWG | DXF
HUS210 right view: DWG | DXF
HUS210 top view: DWG | DXF
None for this model
HUS214-3None for this model None for this model
HUS26 HUS26: DWG | DXF
HUS26 front view: DWG | DXF
HUS26 left view: DWG | DXF
HUS26 right view: DWG | DXF
HUS26 top view: DWG | DXF
HUS26 to 1-ply with blocking: DWG | DXF
High Wind-Resistant Construction D109: Hanger Uplift Considerations: DWG | DXF
HUS28 HUS28: DWG | DXF
HUS28 front view: DWG | DXF
HUS28 left view: DWG | DXF
HUS28 right view: DWG | DXF
HUS28 top view: DWG | DXF
None for this model
HUS48 HUS48: DWG | DXF
HUS48TF: DWG | DXF
HUS48 front view: DWG | DXF
HUS48 with top flange front view: DWG | DXF
HUS48 left view: DWG | DXF
HUS48 with top flange left view: DWG | DXF
HUS48 right view: DWG | DXF
HUS48 with top flange right view: DWG | DXF
HUS48 top view: DWG | DXF
HUS48 with top flange top view: DWG | DXF
None for this model
LUSNone for this model None for this model
LUS210 LUS210: DWG | DXF
LUS210 front view: DWG | DXF
LUS210 left view: DWG | DXF
LUS210 right view: DWG | DXF
LUS210 top view: DWG | DXF
High Wind-Resistant Construction D59: Pile/Girder to Wall: DWG | DXF
Pile to Girder Connectors 2: DWG | DXF
LUS210-2 LUS210-2: DWG | DXF
LUS210-2 front view: DWG | DXF
LUS210-2 left view: DWG | DXF
LUS210-2 right view: DWG | DXF
LUS210-2 top view: DWG | DXF
None for this model
LUS24 LUS24: DWG | DXF
LUS24 front view: DWG | DXF
LUS24 left view: DWG | DXF
LUS24 right view: DWG | DXF
LUS24 top view: DWG | DXF
None for this model
LUS24-2 LUS24-2: DWG | DXF
LUS24-2 front view: DWG | DXF
LUS24-2 left view: DWG | DXF
LUS24-2 right view: DWG | DXF
LUS24-2 top view: DWG | DXF
None for this model
LUS26 LUS26: DWG | DXF
LUS26 front view: DWG | DXF
LUS26 left view: DWG | DXF
LUS26 right view: DWG | DXF
LUS26 top view: DWG | DXF
None for this model
LUS26-2 LUS26-2: DWG | DXF
LUS26-2 front view: DWG | DXF
LUS26-2 left view: DWG | DXF
LUS26-2 right view: DWG | DXF
LUS26-2 top view: DWG | DXF
None for this model
LUS28 LUS28: DWG | DXF
LUS28 front view: DWG | DXF
LUS28 left view: DWG | DXF
LUS28 right view: DWG | DXF
LUS28 top view: DWG | DXF
LUS28 View 1: DWG | DXF
LUS28 View 2: DWG | DXF
LUS28-2 LUS28-2: DWG | DXF
LUS28-2 front view: DWG | DXF
LUS28-2 left view: DWG | DXF
LUS28-2 right view: DWG | DXF
LUS28-2 top view: DWG | DXF
None for this model
LUS410 LUS410: DWG | DXF
LUS410 front view: DWG | DXF
LUS410 left view: DWG | DXF
LUS410 right view: DWG | DXF
LUS410 top view: DWG | DXF
None for this model
LUS46 LUS46: DWG | DXF
LUS46 front view: DWG | DXF
LUS46 left view: DWG | DXF
LUS46 right view: DWG | DXF
LUS46 top view: DWG | DXF
None for this model
LUS48 LUS48: DWG | DXF
LUS48 front view: DWG | DXF
LUS48 left view: DWG | DXF
LUS48 right view: DWG | DXF
LUS48 top view: DWG | DXF
None for this model
MUSNone for this model None for this model
MUS26None for this model MUS26: DWG | DXF
MUS28 MUS28: DWG | DXF
MUS28 front view: DWG | DXF
MUS28 left view: DWG | DXF
MUS28 right view: DWG | DXF
MUS28 top view: DWG | DXF
MUS28: DWG | DXF

   
top
Catalog Pages (PDFs):
Order free catalogs by mail
C-2011 (Wood Construction Connectors), page 133
top
Related Categories:
High Wind Resistance (Wood Construction)
Face Mount Hangers for Glulam Products (Wood Construction)
Face Mount Hangers for Engineered Wood Products (Wood Construction)
Face Mount Hangers for Plated Trusses (Wood Construction)
Face Mount Hangers for Solid Sawn Lumber (Wood Construction)
Joist Hangers for Home Products (DIY)
top
Need help with downloads?

Home | About Simpson Strong-Tie | Contact Simpson Strong-Tie | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson Strong-Tie newsletters

Copyright © 2012, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2012 Simpson Strong-Tie®