www.strongtie.com


>>Home   > All Products - Alphabetical List   >    Face Mount Hanger Tables

Face Mount Hangers Load Table
for Structural Composite Lumber

  Print this page
Link to email this page to a friend  Email this page to a friend
  1. 10d commons or 16d sinkers may be used instead of the specified 16d at 0.84 of the table load value.
  2. 16d sinkers may be used instead of the specified 10d commons with no load reduction.
  3. Uplift loads based on DF/SP lumber and have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction refer to Simpson Strong-Tie® Connector Selector™ software or conservatively divide the uplift load by 1.6.
    For SPF/HF, use 0.86 x DF/SP Uplift Load for products requiring nails and 0.72 x DF/SP Uplift Load for products requiring screws.
  4. MIN nailing quantity and load values - fill all round holes; MAX nailing quantity and load values - fill all round and triangle holes.
  5. Hangers sorted in order of recommended selection for best overall performance and installation value.
  6. NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long. See other nail sizes and information.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO ES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
HGUSSee specific model numbers for code listings.
HGUS410      FL11468 NER-413    
HGUS412      FL11468      
HGUS414      FL11468      
HGUS5.50/10      FL11468      
HGUS5.50/12      FL11468      
HGUS5.50/14      FL11468      
HGUS7.25/10      FL11468      
HGUS7.25/12      FL11468      
HGUS7.25/14      FL11468      
HHUSSee specific model numbers for code listings.
HHUS5.50/10      FL11468      
HHUS7.25/10      FL11468      
HUSee specific model numbers for code listings.
HU410-2  ESR-2552 / ESR-2523 * RR25801 FL10531      
HU410-2  ESR-2552 / ESR-2523 * RR25801 FL10531      
HU412-2  ESR-2552 / ESR-2523 * RR25801 FL10531      
HU412-2  ESR-2552 / ESR-2523 * RR25801 FL10531      
HU414-2  ESR-2552 / ESR-2523 * RR25801 FL10531      
HU416  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10531      
HU416  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10531      
HU610  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10531      
HU612  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10531      
HU616  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 / RR25807 FL10655 / FL10531      
HU68  ESR-2549 / ESR-2523 * RR25807 FL10655      
HUC410-2  ESR-2552 / ESR-2523 * RR25801        
HUC412-2  ESR-2552 / ESR-2523 * RR25801        
HUC414-2  ESR-2552 / ESR-2523 * RR25801        
HUC416  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL10655 / FL10447      
HUC610  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL10655 / FL10531      
HUC612  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL10655 / FL10531      
HUC616  ESR-2549 / ESR-2552 / ESR-2523 * RR25801 FL10655 / FL10531      
HUC68  ESR-2549 / ESR-2523 *   FL10655      
HUCQ412-SDS      FL11468      
HUCQ610-SDS      FL11468      
HUCQ612-SDS      FL11468      



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
HGUSNone for this model None for this model
HGUS410 HGUS410: DWG | DXF
HGUS410 front view: DWG | DXF
HGUS410 left view: DWG | DXF
HGUS410 right view: DWG | DXF
HGUS410 top view: DWG | DXF
None for this model
HGUS412 HGUS412: DWG | DXF
HGUS412 front view: DWG | DXF
HGUS412 left view: DWG | DXF
HGUS412 right view: DWG | DXF
HGUS412 top view: DWG | DXF
None for this model
HGUS414 HGUS414: DWG | DXF
HGUS414 front view: DWG | DXF
HGUS414 right view: DWG | DXF
HGUS414 top view: DWG | DXF
None for this model
HGUS5.50/10 HGUS5.50/10: DWG | DXF
HGUS5.50/10 front view: DWG | DXF
HGUS5.50/10 left view: DWG | DXF
HGUS5.50/10 right view: DWG | DXF
HGUS5.50/10 top view: DWG | DXF
None for this model
HGUS5.50/12 HGUS5.50/12: DWG | DXF
HGUS5.50/12 front view: DWG | DXF
HGUS5.50/12 left view: DWG | DXF
HGUS5.50/12 right view: DWG | DXF
HGUS5.50/12 top view: DWG | DXF
None for this model
HGUS5.50/14 HGUS5.50/14: DWG | DXF
HGUS5.50/14 front view: DWG | DXF
HGUS5.50/14 left view: DWG | DXF
HGUS5.50/14 right view: DWG | DXF
HGUS5.50/14 top view: DWG | DXF
None for this model
HGUS7.25/10 HGUS7.25/10: DWG | DXF
HGUS7.25/10 front view: DWG | DXF
HGUS7.25/10 left view: DWG | DXF
HGUS7.25/10 right view: DWG | DXF
HGUS7.25/10 top view: DWG | DXF
None for this model
HGUS7.25/12 HGUS7.25-12: DWG | DXF
HGUS7.25-12 front view: DWG | DXF
HGUS7.25-12 left view: DWG | DXF
HGUS7.25-12 right view: DWG | DXF
HGUS7.25-12 top view: DWG | DXF
None for this model
HGUS7.25/14 HGUS7.25-14: DWG | DXF
HGUS7.25-14 front view: DWG | DXF
HGUS7.25-14 right view: DWG | DXF
HGUS7.25-14 top view: DWG | DXF
None for this model
HHUSNone for this model HHUS Skewed top view: DWG | DXF
HHUS5.50/10 HHUS5.50/10: DWG | DXF
HHUS5.50/10 front view: DWG | DXF
HHUS5.50/10 left view: DWG | DXF
HHUS5.50/10 right view: DWG | DXF
HHUS5.50/10 top view: DWG | DXF
None for this model
HHUS7.25/10None for this model None for this model
HU HU sloped down skewed left: DWG | DXF
HU sloped down skewed right: DWG | DXF
HU sloped down: DWG | DXF
HU sloped left: DWG | DXF
HU skewed right: DWG | DXF
HU series: DWG | DXF
HU sloped up skewed left: DWG | DXF
HU sloped up skewed right: DWG | DXF
HU sloped up: DWG | DXF
HU sloped down skewed left front view: DWG | DXF
HU sloped down skewed right front view: DWG | DXF
HU sloped down front view: DWG | DXF
HU sloped left front view: DWG | DXF
HU skewed right front view: DWG | DXF
HU series front view: DWG | DXF
HU sloped up skewed left front view: DWG | DXF
HU sloped up skewed right front view: DWG | DXF
HU sloped up front view: DWG | DXF
HU skewed right left view: DWG | DXF
HU sloped down skewed left right view: DWG | DXF
HU series sloped down right view: DWG | DXF
HU sloped left right view: DWG | DXF
HU series right view: DWG | DXF
HU sloped up skewed left right view: DWG | DXF
HU sloped up skewed right right view: DWG | DXF
HU sloped up right view: DWG | DXF
HU sloped down top view: DWG | DXF
HU sloped left top view: DWG | DXF
HU skewed right top view: DWG | DXF
HU series top view: DWG | DXF
HU sloped up skewed left top view: DWG | DXF
HU sloped up skewed right top view: DWG | DXF
HU sloped up top view: DWG | DXF
HU 2x Joist: DWG | DXF
HU Glulam Joist: DWG | DXF
HU 4x Joist: DWG | DXF
U&HU Skewed: DWG | DXF
HU410-2None for this model None for this model
HU410-2None for this model None for this model
HU412-2None for this model None for this model
HU412-2None for this model None for this model
HU414-2None for this model None for this model
HU416 HU416: DWG | DXF
HU416 front view: DWG | DXF
HU416 left view: DWG | DXF
HU416 right view: DWG | DXF
HU416 top view: DWG | DXF
None for this model
HU416 HU416: DWG | DXF
HU416 front view: DWG | DXF
HU416 left view: DWG | DXF
HU416 right view: DWG | DXF
HU416 top view: DWG | DXF
None for this model
HU610 HU610: DWG | DXF
HU610 front view: DWG | DXF
HU610 left view: DWG | DXF
HU610 right view: DWG | DXF
HU610 top view: DWG | DXF
None for this model
HU612 HU612: DWG | DXF
HU612 with top flange: DWG | DXF
HU612 front view: DWG | DXF
HU612 with top flange front view: DWG | DXF
HU612 left view: DWG | DXF
HU612 with top flange left view: DWG | DXF
HU612 right view: DWG | DXF
HU612 with top flange right view: DWG | DXF
HU612 top view: DWG | DXF
HU612 with top flange top view: DWG | DXF
None for this model
HU616None for this model None for this model
HU68 HU68: DWG | DXF
HU68 front view: DWG | DXF
HU68 left view: DWG | DXF
HU68 right view: DWG | DXF
HU68 top view: DWG | DXF
None for this model
HUC410-2None for this model None for this model
HUC412-2None for this model None for this model
HUC414-2None for this model None for this model
HUC416None for this model None for this model
HUC610 HUC610: DWG | DXF
HUC610 front view: DWG | DXF
HUC610 right view: DWG | DXF
HUC610 top view: DWG | DXF
None for this model
HUC612 HUC612: DWG | DXF
HUC612 front view: DWG | DXF
HUC612 left view: DWG | DXF
HUC612 right view: DWG | DXF
HUC612 top view: DWG | DXF
None for this model
HUC616None for this model None for this model
HUC68 HUC68: DWG | DXF
HUC68 front view: DWG | DXF
HUC68 left view: DWG | DXF
HUC68 right view: DWG | DXF
HUC68 top view: DWG | DXF
None for this model
HUCQ412-SDSNone for this model None for this model
HUCQ610-SDSNone for this model None for this model
HUCQ612-SDSNone for this model None for this model

   
top
Catalog Pages (PDFs):
Order free catalogs by mail
C-2009 (Wood Construction Connectors), page 88
top
Related Categories:
Face Mount Hangers for Glulam Products (Wood Construction)
Face Mount Hangers for Engineered Wood Products (Wood Construction)
Face Mount Hangers for Plated Trusses (Wood Construction)
Face Mount Hangers for Solid Sawn Lumber (Wood Construction)
Hangers for Masonry (Wood Construction)
Hangers - Concrete (Wood Construction)
Hangers (Cold-Formed Steel)
top
Need help with downloads?

Home | About Simpson | Contact Simpson | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson's newsletters

Copyright © 2009, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2009 Simpson Strong-Tie®