www.strongtie.com


>>Home   > All Products - Alphabetical List   >    Top Flange Hangers Tables

Top Flange Hangers Load Table: Glulam Beams

  Print this page
Link to email this page to a friend  Email this page to a friend
  Code Reports
  1. N54A fasteners are supplied with hangers.
  2. Roof loads are 125% of floor loads unless limited by other criteria.
  3. Uplift loads have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction refer to Simpson Strong-Tie® Connector Selector™ software or conservatively divide the uplift load by 1.6.
  4. GLT, HGLT, GLS, HGLS uplift loads only apply when “H” is 28" or less.
  5. Allowable loads for glulam sizes are based on 560 psi wood bearing.
  6. Maximum allowable horizontal load for the GLST/HGLST is 14580 lbs. (160). Load is horizontal across the supporting member and independent of vertical loads and includes a 60% increase for wind or earthquake loading with no further increase allowed.
  7. "Min H" is the minimum H dimension that may be specified. For GLT, HGLT, GLS, HGLS hanger heights that exceed the joist height, allowable load is 0.50 of the table load.
  8. Allowable loads assume GLS, GLST, HGLS and HGLST loads are distributed evenly on each side of the header with loads shown for each stirrup. When the load is not evenly distributed, use the equivalent single-sided top flange hanger allowable load for each side. (e.g., for uneven load distribution on a GLS3-5, use the GLT3 allowable loads for each side.)
  9. GLS, GLST, HGLS, HGLST fasteners listed are for one side only. Fasteners supplied are for both sides of the saddle.
  10. SPEC: Specify the header dimensions for the saddle hangers. (See "S" dimension illustration.)
  11. NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, N54A = 0.250" dia. x 2 1/2" long - annular ring. See other nail sizes and information.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO ES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
GBSee specific model numbers for code listings.
GB3  ESR-2615 / ESR-2523 *   FL10667    
GB5  ESR-2615 / ESR-2523 *   FL10667    
GB7  ESR-2615 / ESR-2523 *   FL10667    
GLSSee specific model numbers for code listings.
GLS3-5  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLS3-7  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLS3-9  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLS5-5  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLS5-7  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLS7-7  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLS7-9  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLSTSee specific model numbers for code listings.
GLST3-5  ESR-2615 / ESR-2523 *   FL10667    
GLST3-7  ESR-2615 / ESR-2523 *   FL10667    
GLST3-9  ESR-2615 / ESR-2523 *   FL10667    
GLST5-5  ESR-2615 / ESR-2523 *   FL10667    
GLST5-7  ESR-2615 / ESR-2523 *   FL10667    
GLST7-7  ESR-2615 / ESR-2523 *   FL10667    
GLST7-9  ESR-2615 / ESR-2523 *   FL10667    
GLTNo code listing: Please contact us for test data.
GLT3  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLT5  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLT7  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLTV4  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLTV6  ESR-2615 / ESR-2523 *   FL10667    
GLTV7.12No code listing: Please contact us for test data.
HGBSee specific model numbers for code listings.
HGB5  ESR-2615 / ESR-2523 *   FL10667    
HGB7  ESR-2615 / ESR-2523 *   FL10667    
HGLSSee specific model numbers for code listings.
HGLS5  ESR-2615 / ESR-2523 * RR25803      
HGLS7  ESR-2615 / ESR-2523 * RR25803      
HGLS9  ESR-2615 / ESR-2523 * RR25803      
HGLSTNo code listing: Please contact us for test data.
HGLST5  ESR-2615 / ESR-2523 * RR25803      
HGLST7  ESR-2615 / ESR-2523 * RR25803      
HGLST9  ESR-2615 / ESR-2523 * RR25803      
HGLTSee specific model numbers for code listings.
HGLT3  ESR-2615 / ESR-2523 * RR25803 FL10667    
HGLT5  ESR-2615 / ESR-2523 * RR25803 FL10667    
HGLT7  ESR-2615 / ESR-2523 * RR25803 FL10667    
HGLT9  ESR-2615 / ESR-2523 *   FL10667    
HGLTV4  ESR-2615 / ESR-2523 * RR25803 FL10667    
HGLTV6  ESR-2615 / ESR-2523 *   FL10667    
HGLTV7.12No code listing: Please contact us for test data.
HHBSee specific model numbers for code listings.
HHB3  ESR-2615 / ESR-2523 *   FL10667    
HHB5  ESR-2615 / ESR-2523 *   FL10667    
HHB7  ESR-2615 / ESR-2523 *   FL10667    
HUSee specific model numbers for code listings.
HU3.25/12TFNo code listing: Please contact us for test data.
HU3.25/16.5TFNo code listing: Please contact us for test data.
HU5.25/12TFNo code listing: Please contact us for test data.
HU5.25/16.5TFNo code listing: Please contact us for test data.
HWNo code listing: Please contact us for test data.
HW3.25  ESR-2553 / ESR-2523 * RR25800 FL10856 / FL10667    
HW5.25  ESR-2553 / ESR-2523 * RR25800 FL10856 / FL10667    

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
GBNone for this model GB: DWG | DXF
GB3None for this model None for this model
GB5None for this model None for this model
GB7None for this model None for this model
GLSNone for this model None for this model
GLS3-5None for this model None for this model
GLS3-7None for this model None for this model
GLS3-9None for this model None for this model
GLS5-5None for this model None for this model
GLS5-7None for this model None for this model
GLS7-7None for this model None for this model
GLS7-9None for this model None for this model
GLSTNone for this model GLST: DWG | DXF
GLST3-5None for this model None for this model
GLST3-7None for this model None for this model
GLST3-9None for this model None for this model
GLST5-5None for this model None for this model
GLST5-7None for this model None for this model
GLST7-7None for this model None for this model
GLST7-9None for this model None for this model
GLTNone for this model CC with GLT: DWG | DXF
GLT Sloped and Skewed: DWG | DXF
GLT Top Flange Offset: DWG | DXF
GLT3 GLT3: DWG | DXF
GLT3SKL: DWG | DXF
GLT3SKR: DWG | DXF
GLT3 front view: DWG | DXF
GLT3SKL front view: DWG | DXF
GLT3SKR front view: DWG | DXF
GLT3 left view: DWG | DXF
GLT3SKR left view: DWG | DXF
GLT3 right view: DWG | DXF
GLT3SKL right view: DWG | DXF
GLT3SKL top view: DWG | DXF
GLT3SKR top view: DWG | DXF
GLT3 top view: DWG | DXF
None for this model
GLT5 GLT5: DWG | DXF
GLT5 front view: DWG | DXF
GLT5 left view: DWG | DXF
GLT5 right view: DWG | DXF
GLT5 top view: DWG | DXF
None for this model
GLT7None for this model None for this model
GLTV4None for this model None for this model
GLTV6None for this model None for this model
GLTV7.12None for this model None for this model
HGBNone for this model None for this model
HGB5None for this model None for this model
HGB7None for this model None for this model
HGLSNone for this model None for this model
HGLS5 HGLS5: DWG | DXF
HGLS5 front view: DWG | DXF
HGLS5 left view: DWG | DXF
HGLS5 right view: DWG | DXF
None for this model
HGLS7None for this model None for this model
HGLS9None for this model None for this model
HGLSTNone for this model None for this model
HGLST5None for this model None for this model
HGLST7None for this model None for this model
HGLST9None for this model None for this model
HGLTNone for this model HGLT Top Flange Sloped Down: DWG | DXF
HGLT3 HGLT3SKL: DWG | DXF
HGLT3SKR: DWG | DXF
HGLT3SKL front view: DWG | DXF
HGLT3SKR front view: DWG | DXF
HGLT3SKR left view: DWG | DXF
HGLT3SKL right view: DWG | DXF
HGLT3SKL top view: DWG | DXF
HGLT3SKR top view: DWG | DXF
None for this model
HGLT5None for this model None for this model
HGLT7None for this model None for this model
HGLT9None for this model None for this model
HGLTV4None for this model None for this model
HGLTV6None for this model None for this model
HGLTV7.12None for this model None for this model
HHBNone for this model None for this model
HHB3None for this model None for this model
HHB5None for this model None for this model
HHB7None for this model None for this model
HU HU sloped down skewed left: DWG | DXF
HU sloped down skewed right: DWG | DXF
HU sloped down: DWG | DXF
HU sloped left: DWG | DXF
HU skewed right: DWG | DXF
HU series: DWG | DXF
HU sloped up skewed left: DWG | DXF
HU sloped up skewed right: DWG | DXF
HU sloped up: DWG | DXF
HU sloped down skewed left front view: DWG | DXF
HU sloped down skewed right front view: DWG | DXF
HU sloped down front view: DWG | DXF
HU sloped left front view: DWG | DXF
HU skewed right front view: DWG | DXF
HU series front view: DWG | DXF
HU sloped up skewed left front view: DWG | DXF
HU sloped up skewed right front view: DWG | DXF
HU sloped up front view: DWG | DXF
HU skewed right left view: DWG | DXF
HU sloped down skewed left right view: DWG | DXF
HU series sloped down right view: DWG | DXF
HU sloped left right view: DWG | DXF
HU series right view: DWG | DXF
HU sloped up skewed left right view: DWG | DXF
HU sloped up skewed right right view: DWG
HU sloped up right view: DWG | DXF
HU sloped down top view: DWG | DXF
HU sloped left top view: DWG | DXF
HU skewed right top view: DWG | DXF
HU series top view: DWG | DXF
HU sloped up skewed left top view: DWG | DXF
HU sloped up skewed right top view: DWG | DXF
HU sloped up top view: DWG | DXF
HU 2x Joist: DWG | DXF
HU Glulam Joist: DWG | DXF
HU 4x Joist: DWG | DXF
U&HU Skewed: DWG | DXF
HU3.25/12TFNone for this model None for this model
HU3.25/16.5TFNone for this model None for this model
HU5.25/12TFNone for this model None for this model
HU5.25/16.5TFNone for this model None for this model
HW HW series: DWG | DXF
HW skew left: DWG
HW skew right: DWG
HW sloped down: DWG | DXF
HW sloped down and skewed left: DWG | DXF
HW sloped down and skewed right: DWG | DXF
HW sloped up: DWG | DXF
HW sloped up and skewed left: DWG | DXF
HW sloped up and skewed right: DWG | DXF
HW with top flange down left: DWG | DXF
HW with top flange down right: DWG | DXF
HW with top flange offset left: DWG | DXF
HW with top flange offset right: DWG | DXF
HW series front view: DWG | DXF
HW skew left front view: DWG
HW skew right front view: DWG
HW sloped down front view: DWG | DXF
HW sloped down and skewed left front view: DWG | DXF
HW sloped down and skewed right front view: DWG | DXF
HW sloped up front view: DWG | DXF
HW sloped up and skewed left front view: DWG | DXF
HW sloped up and skewed right front view: DWG | DXF
HW with top flange down left front view: DWG | DXF
HW with top flange down right front view: DWG | DXF
HW with top flange offset left front view: DWG | DXF
HW with top flange offset right front view: DWG | DXF
HW series left view: DWG | DXF
HW sloped down left view: DWG | DXF
HW sloped up left view: DWG | DXF
HW with top flange down left left view: DWG | DXF
HW with top flange offset right left view: DWG | DXF
HW series right view: DWG | DXF
HW sloped down right view: DWG | DXF
HW sloped up right view: DWG | DXF
HW with top flange down right right view: DWG | DXF
HW with top flange offset left right view: DWG | DXF
HW skew left top view: DWG
HW skew right top view: DWG
HW sloped down and skewed left top view: DWG | DXF
HW sloped down and skewed right top view: DWG | DXF
HW sloped down top view: DWG | DXF
HW sloped up and skewed left top view: DWG | DXF
HW sloped up top view: DWG | DXF
HW series top view: DWG | DXF
HW with top flange down left top view: DWG | DXF
HW with top flange down right top view: DWG | DXF
HW with top flange offset left top view: DWG | DXF
HW with top flange offset right top view: DWG | DXF
CC with HW: DWG | DXF
Panel Connectors: DWG | DXF
HW3.25None for this model None for this model
HW5.25None for this model None for this model

   
top
Catalog Pages (PDFs):
Order free catalogs by mail
C-2009 (Wood Construction Connectors), page 115
top
Related Categories:
Top Flange Hangers for Glulam Products (Wood Construction)
Top Flange Hangers for Solid Sawn Lumber (Wood Construction)
Face Mount Hangers for Glulam Products (Wood Construction)
Face Mount Hangers for Solid Sawn Lumber (Wood Construction)
Face Mount Hangers for Engineered Wood Products (Wood Construction)
Hangers for Masonry (Wood Construction)
Hangers - Concrete (Wood Construction)
Top Flange Hangers for Engineered Wood Products (Wood Construction)
Hangers (Cold-Formed Steel)
top
Need help with downloads?

Home | About Simpson Strong-Tie | Contact Simpson Strong-Tie | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson Strong-Tie newsletters

Copyright © 2010, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2010 Simpson Strong-Tie®