Top Flange Hangers Load Table - I-Joists & Structural Composite Lumber


	Code Reports

	11 1/2 x 9 1/4 – 1 3/4 x 11 7/8 1 3/4 x 14 – 2 5/16 x 16 2 5x16 x 18 – 2 1/2 x 18 2 1/2 x 20 – 3 1/2 x 7 1/4 3 1/2 x 9 1/4 – 3 1/2 x 13		3 1/2 x 14 – 3 1/2 x 20 3 1/2 x 22 - 4 5/8 x 16 4 5/8 x 18 – 5 1/4 x 11 1/4 5 1/4 x 11 7/8 – 7 x 11 7/8 7 x 14 – 7 x 32

	All Top Flange Hanger Load Tables

Loads may not be increased for short-term loading.
Uplift loads are based on DF/SP lumber and have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction refer to Simpson Strong Tie® Connector Selector™ software or conservatively divide the uplift load by 1.6. For SPF/HF use 0.86 x DF/SP uplift load.
WM loads listed are based on embedded installation (mid-wall) into a masonry block wall. (See W/WPU/WNP/WM/WMU/HW/HWU/GLT/HGLT)

When I-joist is used as header, all nails must be 10dx1 1/2 and allowable loads assume flanges that are at least 1 1/2" thick made of Douglas Fir, LVL or LSL. For other flange thicknesses, apply load adjustment factors found in the table below.

Hangers sorted in order of recommended selection for best overall performance and installation value.
Other nail schedules and loads are listed on individual hanger pages: ITS/ITT/MIT/HIT, LBV/BA/B/HB and W/WP/WPU/WM/WMU/HW/HWU.
See code reports.
Web stiffeners are required where noted and when supporting double I-joists with flanges less than 1 5/16" thick.
For 2 1/4"x22" and 24" joist sizes, refer to technical bulletin T-BSERIES08.
NAILS: 16d and 16d DPLX = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2= 0.148" dia. x 1 1/2" long. See other nail sizes and information.

Parallam® is a registered trademark of iLevel by Weyerhaeuser.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
BA	No code listing. Please contact us for test data.
BA2.56/11.88		ESR-1866 / ESR-2523 *		FL11166
BA2.56/14		ESR-1866 / ESR-2523 *		FL11166
BA2.56/14		ESR-1866 / ESR-2523 *		FL11166
BA2.56/16		ESR-1866 / ESR-2523 *		FL11166
BA2.56/16		ESR-1866 / ESR-2523 *		FL11166
HIT	See specific model numbers for code listings.
HIT318		ESR-2615 / ESR-2523 *	RR25803	FL10667
HIT320		ESR-2615 / ESR-2523 *	RR25803	FL10667
HIT322		ESR-2615 / ESR-2523 *	RR25803	FL10667
HIT324		ESR-2615 / ESR-2523 *	RR25803	FL10667
HIT326		ESR-2615 / ESR-2523 *	RR25803	FL10667
HIT3520		ESR-2615 / ESR-2523 *	RR25803	FL10667
HWI322		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITS2.56/11.25		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITS2.56/11.88		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITS2.56/13		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITS2.56/14		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITS2.56/16		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITS2.56/9.25	No code listing. Please contact us for test data.
ITS2.56/9.37		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITS2.56/9.5		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITT	See specific model numbers for code listings.
ITT311.25		ESR-2615 / ESR-2523 *
ITT311.5		ESR-2615 / ESR-2523 *
ITT311.88		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITT313		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITT314		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITT316		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITT39.25		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITT39.37		ESR-2615 / ESR-2523 *	RR25803	FL10667
ITT39.5		ESR-2615 / ESR-2523 *	RR25803	FL10667
LBV	See specific model numbers for code listings.
LBV2.37/20		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/11.25		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/11.5	No code listing. Please contact us for test data.
LBV2.56/11.88		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/13		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/14		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/16		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/18		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/20		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/22		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/24		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/26		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/9.25		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/9.37		ESR-1866 / ESR-2523 *	RR25802	FL11166
LBV2.56/9.5		ESR-1866 / ESR-2523 *	RR25802	FL11166
MIT	See specific model numbers for code listings.
MIT311.88		ESR-2615 / ESR-2523 *	RR25803	FL10667
MIT314		ESR-2615 / ESR-2523 *	RR25803	FL10667
MIT316		ESR-2615 / ESR-2523 *	RR25803	FL10667
MIT318		ESR-2615 / ESR-2523 *	RR25803	FL10667
MIT320		ESR-2615 / ESR-2523 *	RR25803	FL10667
MIT3520		ESR-2615 / ESR-2523 *	RR25803	FL10667
WI	No code listing. Please contact us for test data.
WI311.25		ESR-2615 / ESR-2523 *
WI311.5	No code listing. Please contact us for test data.
WI39.25		ESR-2615 / ESR-2523 *
WI39.5		ESR-2615 / ESR-2523 *	RR25803	FL10667
WM	No code listing. Please contact us for test data.
WM3520		ESR-2877 / ESR-2523 *
WMI314		ESR-2877 / ESR-2523 *
WMI316		ESR-2877 / ESR-2523 *
WMI318		ESR-2877 / ESR-2523 *
WMI320		ESR-2877 / ESR-2523 *
WP	No code listing. Please contact us for test data.
WP3520		ESR-2615 / ESR-2523 *		FL10667
WPI	See specific model numbers for code listings.
WPI311.88		ESR-2615 / ESR-2523 *		FL10667
WPI314		ESR-2615 / ESR-2523 *		FL10667
WPI316		ESR-2615 / ESR-2523 *		FL10667
WPI318		ESR-2615 / ESR-2523 *		FL10667
WPI320		ESR-2615 / ESR-2523 *		FL10667
WPI322		ESR-2615 / ESR-2523 *		FL10667
WPI324		ESR-2615 / ESR-2523 *		FL10667
WPI326		ESR-2615 / ESR-2523 *		FL10667

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
BA	None for this model	None for this model
BA2.56/11.88	BA2.56/11.88: DWG \| DXF BA2.56/11.88 front view: DWG \| DXF BA2.56/11.88 left view: DWG \| DXF BA2.56/11.88 right view: DWG \| DXF BA2.56/11.88 top view: DWG \| DXF	None for this model
BA2.56/14	BA2.56/14: DWG \| DXF BA2.56/14 front view: DWG \| DXF BA2.56/14 left view: DWG \| DXF BA2.56/14 right view: DWG \| DXF BA2.56/14 top view: DWG \| DXF	None for this model
BA2.56/14	BA2.56/14: DWG \| DXF BA2.56/14 front view: DWG \| DXF BA2.56/14 left view: DWG \| DXF BA2.56/14 right view: DWG \| DXF BA2.56/14 top view: DWG \| DXF	None for this model
BA2.56/16	BA2.56/16: DWG \| DXF BA2.56/16 front view: DWG \| DXF BA2.56/16 left vew: DWG \| DXF BA2.56/16 right view: DWG \| DXF BA2.56/16 top view: DWG \| DXF	None for this model
BA2.56/16	BA2.56/16: DWG \| DXF BA2.56/16 front view: DWG \| DXF BA2.56/16 left vew: DWG \| DXF BA2.56/16 right view: DWG \| DXF BA2.56/16 top view: DWG \| DXF	None for this model
HIT	None for this model	None for this model
HIT318	None for this model	None for this model
HIT320	None for this model	None for this model
HIT322	HIT322: DWG \| DXF HIT322 front view: DWG \| DXF HIT322 left view: DWG \| DXF HIT322 right view: DWG \| DXF HIT322 top view: DWG \| DXF	None for this model
HIT324	None for this model	None for this model
HIT326	None for this model	None for this model
HIT3520	None for this model	None for this model
HWI322	None for this model	None for this model
ITS2.56/11.25	None for this model	None for this model
ITS2.56/11.88	None for this model	None for this model
ITS2.56/13	None for this model	None for this model
ITS2.56/14	None for this model	None for this model
ITS2.56/16	None for this model	None for this model
ITS2.56/9.25	None for this model	None for this model
ITS2.56/9.37	None for this model	None for this model
ITS2.56/9.5	None for this model	None for this model
ITT	ITT series: DWG \| DXF ITT series front view: DWG \| DXF ITT series left view: DWG \| DXF ITT series right view: DWG \| DXF ITT series top view: DWG \| DXF	ITT on I Beam with Nailer: DWG \| DXF Flush Framing: DWG \| DXF IUS/ITT Tab Installation 1: DWG \| DXF IUS/ITT Tab Installation 2: DWG \| DXF IUS/ITT Tab Installation 3: DWG \| DXF ITT: DWG \| DXF Web Stiffener 3: DWG \| DXF
ITT311.25	None for this model	None for this model
ITT311.5	None for this model	None for this model
ITT311.88	None for this model	None for this model
ITT313	None for this model	None for this model
ITT314	None for this model	None for this model
ITT316	None for this model	None for this model
ITT39.25	None for this model	None for this model
ITT39.37	None for this model	None for this model
ITT39.5	None for this model	None for this model
LBV	LBV series: DWG \| DXF LBV series front view: DWG \| DXF LBV series left view: DWG \| DXF LBV series right view: DWG \| DXF LBV series top view: DWG \| DXF	None for this model
LBV2.37/20	None for this model	None for this model
LBV2.56/11.25	None for this model	None for this model
LBV2.56/11.5	None for this model	None for this model
LBV2.56/11.88	None for this model	None for this model
LBV2.56/13	None for this model	None for this model
LBV2.56/14	None for this model	None for this model
LBV2.56/16	None for this model	None for this model
LBV2.56/18	None for this model	None for this model
LBV2.56/20	None for this model	None for this model
LBV2.56/22	None for this model	None for this model
LBV2.56/24	None for this model	None for this model
LBV2.56/26	None for this model	None for this model
LBV2.56/9.25	None for this model	None for this model
LBV2.56/9.37	None for this model	None for this model
LBV2.56/9.5	None for this model	None for this model
MIT	MIT series: DWG \| DXF MIT series front view: DWG \| DXF MIT series left view: DWG \| DXF MIT series right view: DWG \| DXF MIT series top view: DWG \| DXF	MIT Double LVL Installation: DWG \| DXF MIT: DWG \| DXF
MIT311.88	None for this model	None for this model
MIT314	None for this model	None for this model
MIT316	None for this model	None for this model
MIT318	None for this model	None for this model
MIT320	None for this model	None for this model
MIT3520	None for this model	None for this model
WI	None for this model	None for this model
WI311.25	None for this model	None for this model
WI311.5	None for this model	None for this model
WI39.25	None for this model	None for this model
WI39.5	None for this model	None for this model
WM	None for this model	WM View 1: DWG \| DXF WM View 2: DWG \| DXF WM Skewed: DWG \| DXF
WM3520	None for this model	None for this model
WMI314	None for this model	None for this model
WMI316	None for this model	None for this model
WMI318	None for this model	None for this model
WMI320	None for this model	None for this model
WP	None for this model	WP Skewed: DWG \| DXF
WP3520	None for this model	None for this model
WPI	None for this model	None for this model
WPI311.88	None for this model	None for this model
WPI314	None for this model	None for this model
WPI316	None for this model	None for this model
WPI318	None for this model	None for this model
WPI320	None for this model	None for this model
WPI322	None for this model	None for this model
WPI324	None for this model	None for this model
WPI326	None for this model	None for this model