www.strongtie.com


>>Home   > All Products - Alphabetical List    > Top Flange Hangers Load Tables

Top Flange Hangers Load Tables:
I-Joists & Structural Composite Lumber

  Print this page
Link to email this page to a friend  Email this page to a friend
  Code Reports
 
       
 
  All Top Flange Hanger Load Tables
 
  1. Loads may not be increased for short-term loading.
  2. Uplift loads are based on DF/SP lumber and have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction refer to Simpson Strong Tie® Connector Selector™ software or conservatively divide the uplift load by 1.6. For SPF/HF use 0.86 x DF/SP uplift load.
  3. WM loads listed are based on embedded installation (mid-wall) into a masonry block wall. (See W/WPU/WNP/WM/WMU/HW/HWU/GLT/HGLT)
  4. When I-joist is used as header, all nails must be 10dx1 1/2 and allowable loads assume flanges that are at least 1 1/2" thick made of Douglas Fir, LVL or LSL. For other flange thicknesses, apply load adjustment factors found in the table below.
  5. Hangers sorted in order of recommended selection for best overall performance and installation value.
  6. Other nail schedules and loads are listed on individual hanger pages: ITS/ITT/MIT/HIT, LBV/BA/B/HB and W/WP/WPU/WM/WMU/HW/HWU.
  7. See code reports.
  8. Web stiffeners are required where noted and when supporting double I-joists with flanges less than 1 5/16" thick.
  9. For 2 1/4"x22" and 24" joist sizes, refer to technical bulletin T-BSERIES08.
  10. NAILS: 16d and 16d DPLX = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2= 0.148" dia. x 1 1/2" long. See other nail sizes and information.

Parallam® is a registered trademark of iLevel by Weyerhaeuser.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO ES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
GLTVSee specific model numbers for code listings.
GLTV2.75/11.25 No code listing. Please contact us for test data.
GLTV2.75/11.88 No code listing. Please contact us for test data.
GLTV2.75/14 No code listing. Please contact us for test data.
GLTV2.75/16 No code listing. Please contact us for test data.
GLTV2.75/9.25 No code listing. Please contact us for test data.
GLTV2.75/9.5 No code listing. Please contact us for test data.
GLTV3.56/9.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
HB3.56/9.25  ESR-1866 / ESR-2523 *   FL11166      
HGLTV3.56/9.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
HITSee specific model numbers for code listings.
HIT322  ESR-2615 / ESR-2523 * RR25803 FL10667      
HIT324  ESR-2615 / ESR-2523 * RR25803 FL10667      
HIT326  ESR-2615 / ESR-2523 * RR25803 FL10667      
HWI No code listing. Please contact us for test data.
HWI322  ESR-2615 / ESR-2523 * RR25803 FL10667      
HWI49.25  ESR-2615 / ESR-2523 *          
HWU No code listing. Please contact us for test data.
HWU2.75/11.25  ESR-2615 / ESR-2523 *          
HWU2.75/11.88  ESR-2615 / ESR-2523 *   FL10667      
HWU2.75/14  ESR-2615 / ESR-2523 *   FL10667      
HWU2.75/16  ESR-2615 / ESR-2523 *   FL10667      
HWU2.75/9.25  ESR-2615 / ESR-2523 *          
HWU2.75/9.5  ESR-2615 / ESR-2523 *   FL10667      
HWU3.56/9.25  ESR-2615 / ESR-2523 *          
ITT49.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
LBVSee specific model numbers for code listings.
LBV2.56/22  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV2.56/24  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV2.56/26  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV2.56/28  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV2.56/30  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.12/11.25  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.12/11.88  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.12/14  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.12/16  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.12/9.25  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.12/9.5  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.56/7.25  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.56/9.25  ESR-1866 / ESR-2523 * RR25802 FL11166      
MITSee specific model numbers for code listings.
MIT211.88-2  ESR-2615 / ESR-2523 * RR25803 FL10667      
MIT29.5-2  ESR-2615 / ESR-2523 * RR25803 FL10667      
WM No code listing. Please contact us for test data.
WM211.25-2  ESR-2877 / ESR-2523 *          
WM211.88-2  ESR-2877 / ESR-2523 *          
WM29.25-2  ESR-2877 / ESR-2523 *          
WM29.5-2  ESR-2877 / ESR-2523 *          
WP No code listing. Please contact us for test data.
WP211.25-2  ESR-2615 / ESR-2523 *   FL10667      
WP211.88-2  ESR-2615 / ESR-2523 *   FL10667      
WP29.25-2  ESR-2615 / ESR-2523 *   FL10667      
WP29.5-2  ESR-2615 / ESR-2523 *   FL10667      
WPISee specific model numbers for code listings.
WPI322  ESR-2615 / ESR-2523 *   FL10667      
WPI324  ESR-2615 / ESR-2523 *   FL10667      
WPI326  ESR-2615 / ESR-2523 *   FL10667      
WPI328  ESR-2615 / ESR-2523 *   FL10667      
WPI330  ESR-2615 / ESR-2523 *   FL10667      
WPI49.25  ESR-2615 / ESR-2523 *   FL10667      
WPUSee specific model numbers for code listings.
WPU2.75/11.25  ESR-2615 / ESR-2523 *          
WPU2.75/11.88  ESR-2615 / ESR-2523 *   FL10667      
WPU2.75/14  ESR-2615 / ESR-2523 *   FL10667      
WPU2.75/16  ESR-2615 / ESR-2523 *   FL10667      
WPU2.75/9.25  ESR-2615 / ESR-2523 *          
WPU2.75/9.5  ESR-2615 / ESR-2523 *   FL10667      
WPU3.56/7.25  ESR-2615 / ESR-2523 *   FL10667      

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
GLTVNone for this model None for this model
GLTV2.75/11.25None for this model None for this model
GLTV2.75/11.88None for this model None for this model
GLTV2.75/14None for this model None for this model
GLTV2.75/16None for this model None for this model
GLTV2.75/9.25None for this model None for this model
GLTV2.75/9.5None for this model None for this model
GLTV3.56/9.25None for this model None for this model
HB3.56/9.25None for this model None for this model
HGLTV3.56/9.25None for this model None for this model
HITNone for this model None for this model
HIT322 HIT322: DWG | DXF
HIT322 front view: DWG | DXF
HIT322 left view: DWG | DXF
HIT322 right view: DWG | DXF
HIT322 top view: DWG | DXF
None for this model
HIT324None for this model None for this model
HIT326None for this model None for this model
HWINone for this model None for this model
HWI322None for this model None for this model
HWI49.25None for this model None for this model
HWUNone for this model None for this model
HWU2.75/11.25None for this model None for this model
HWU2.75/11.88None for this model None for this model
HWU2.75/14None for this model None for this model
HWU2.75/16None for this model None for this model
HWU2.75/9.25None for this model None for this model
HWU2.75/9.5None for this model None for this model
HWU3.56/9.25 HWU3.56/9.25: DWG | DXF
HWU3.56/9.25SKL: DWG | DXF
HWU3.56/9.25SKR: DWG | DXF
HWU3.56/9.25 front view: DWG | DXF
HWU3.56/9.25SKL front view: DWG | DXF
HWU3.56/9.25SKR front view: DWG | DXF
HWU3.56/9.25SKR left view: DWG | DXF
HWU3.56/9.25 right view: DWG | DXF
HWU3.56/9.25SKL right view: DWG | DXF
HWU3.56/9.25 top view: DWG | DXF
HWU3.56/9.25SKL top view: DWG | DXF
HWU3.56/9.25SKR top view: DWG | DXF
None for this model
ITT49.25None for this model None for this model
LBV LBV series: DWG | DXF
LBV series front view: DWG | DXF
LBV series left view: DWG | DXF
LBV series right view: DWG | DXF
LBV series top view: DWG | DXF
None for this model
LBV2.56/22None for this model None for this model
LBV2.56/24None for this model None for this model
LBV2.56/26None for this model None for this model
LBV2.56/28None for this model None for this model
LBV2.56/30None for this model None for this model
LBV3.12/11.25None for this model None for this model
LBV3.12/11.88None for this model None for this model
LBV3.12/14None for this model None for this model
LBV3.12/16None for this model None for this model
LBV3.12/9.25None for this model None for this model
LBV3.12/9.5None for this model None for this model
LBV3.56/7.25None for this model None for this model
LBV3.56/9.25None for this model None for this model
MIT MIT series: DWG | DXF
MIT series front view: DWG | DXF
MIT series left view: DWG | DXF
MIT series right view: DWG | DXF
MIT series top view: DWG | DXF
MIT Double LVL Installation: DWG | DXF
MIT: DWG | DXF
MIT211.88-2None for this model None for this model
MIT29.5-2None for this model None for this model
WMNone for this model WM View 1: DWG | DXF
WM View 2: DWG | DXF
WM Skewed: DWG | DXF
WM211.25-2None for this model None for this model
WM211.88-2None for this model None for this model
WM29.25-2None for this model None for this model
WM29.5-2None for this model None for this model
WPNone for this model WP Skewed: DWG | DXF
WP211.25-2None for this model None for this model
WP211.88-2None for this model None for this model
WP29.25-2None for this model None for this model
WP29.5-2None for this model None for this model
WPINone for this model None for this model
WPI322None for this model None for this model
WPI324None for this model None for this model
WPI326None for this model None for this model
WPI328None for this model None for this model
WPI330None for this model None for this model
WPI49.25None for this model None for this model
WPU WPU series: DWG | DXF
WPU sloped down: DWG | DXF
WPU sloped up: DWG | DXF
WPU skewed left and sloped down: DWG | DXF
WPU skewed left and sloped up: DWG | DXF
WPU skewed right and sloped down: DWG | DXF
WPU skewed right and sloped up: DWG | DXF
WPU series front view: DWG | DXF
WPU sloped down front view: DWG | DXF
WPU sloped up front view: DWG | DXF
WPU skewed left and sloped down front view: DWG | DXF
WPU skewed left and sloped up front view: DWG | DXF
WPU skewed right and sloped down front view: DWG | DXF
WPU skewed right and sloped up front view: DWG | DXF
WPU series left view: DWG | DXF
WPU sloped down left view: DWG | DXF
WPU sloped up left view: DWG | DXF
WPU series right view: DWG | DXF
WPU sloped down right view: DWG | DXF
WPU sloped up right view: DWG | DXF
WPU series top view: DWG | DXF
WPU sloped down top view: DWG | DXF
WPU sloped up top view: DWG | DXF
WPU skewed left and sloped down top view: DWG | DXF
WPU skewed left and sloped up top view: DWG | DXF
WPU skewed right and sloped down top view: DWG | DXF
WPU skewed right and sloped up top view: DWG | DXF
None for this model
WPU2.75/11.25None for this model None for this model
WPU2.75/11.88None for this model None for this model
WPU2.75/14None for this model None for this model
WPU2.75/16None for this model None for this model
WPU2.75/9.25None for this model None for this model
WPU2.75/9.5None for this model None for this model
WPU3.56/7.25None for this model None for this model

   
top
Catalog Pages (PDFs):
Order free catalogs by mail
C-2009 (Wood Construction Connectors), page 99
top
Related Categories:
Top Flange Hangers for Engineered Wood Products (Wood Construction)
Top Flange Hangers for Glulam Products (Wood Construction)
Top Flange Hangers for Solid Sawn Lumber (Wood Construction)
top
Need help with downloads?

Home | About Simpson | Contact Simpson | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson's newsletters

Copyright © 2009, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2009 Simpson Strong-Tie®