www.strongtie.com


>>Home   > All Products - Alphabetical List    > Top Flange Hangers Load Tables

Top Flange Hangers Load Tables:
I-Joists & Structural Composite Lumber

  Print this page
Link to email this page to a friend  Email this page to a friend
  Code Reports
 
       
 
  All Top Flange Hanger Load Tables
 
  1. Loads may not be increased for short-term loading.
  2. Uplift loads are based on DF/SP lumber and have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction refer to Simpson Strong Tie® Connector Selector™ software or conservatively divide the uplift load by 1.6. For SPF/HF use 0.86 x DF/SP uplift load.
  3. WM loads listed are based on embedded installation (mid-wall) into a masonry block wall. (See W/WPU/WNP/WM/WMU/HW/HWU/GLT/HGLT)
  4. When I-joist is used as header, all nails must be 10dx1 1/2 and allowable loads assume flanges that are at least 1 1/2" thick made of Douglas Fir, LVL or LSL. For other flange thicknesses, apply load adjustment factors found in the table below.
  5. Hangers sorted in order of recommended selection for best overall performance and installation value.
  6. Other nail schedules and loads are listed on individual hanger pages: ITS/ITT/MIT/HIT, LBV/BA/B/HB and W/WP/WPU/WM/WMU/HW/HWU.
  7. See code reports.
  8. Web stiffeners are required where noted and when supporting double I-joists with flanges less than 1 5/16" thick.
  9. For 2 1/4"x22" and 24" joist sizes, refer to technical bulletin T-BSERIES08.
  10. NAILS: 16d and 16d DPLX = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2= 0.148" dia. x 1 1/2" long. See other nail sizes and information.

Parallam® is a registered trademark of iLevel by Weyerhaeuser.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO ES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
BSee specific model numbers for code listings.
B3.56/11.88  ESR-1866 / ESR-2523 * RR25802 FL11166      
BA No code listing. Please contact us for test data.
BA3.56/11.88  ESR-1866 / ESR-2523 *   FL11166      
GLTVSee specific model numbers for code listings.
GLTV3.511  ESR-2615 / ESR-2523 * RR25803 FL10667      
GLTV3.512  ESR-2615 / ESR-2523 * RR25803 FL10667      
GLTV3.56/11.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
GLTV3.56/9.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
GLTV3.59  ESR-2615 / ESR-2523 * RR25803 FL10667      
HB No code listing. Please contact us for test data.
HB3.56/11.25  ESR-1866 / ESR-2523 *   FL11166      
HB3.56/11.88  ESR-1866 / ESR-2523 *   FL11166      
HB3.56/12  ESR-1866 / ESR-2523 *   FL11166      
HB3.56/9.25  ESR-1866 / ESR-2523 *   FL11166      
HB3.56/9.5  ESR-1866 / ESR-2523 *   FL11166      
HGLTVSee specific model numbers for code listings.
HGLTV3.511  ESR-2615 / ESR-2523 * RR25803 FL10667      
HGLTV3.512  ESR-2615 / ESR-2523 * RR25803 FL10667      
HGLTV3.56/11.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
HGLTV3.56/9.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
HGLTV3.59  ESR-2615 / ESR-2523 * RR25803 FL10667      
HUI No code listing. Please contact us for test data.
HUI411.88TFNo code listing: Please contact us for test data.
HWI No code listing. Please contact us for test data.
HWI411.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
HWI411.88  ESR-2615 / ESR-2523 * RR25803 FL10667      
HWI412  ESR-2615 / ESR-2523 *          
HWI49.25  ESR-2615 / ESR-2523 *          
HWI49.5  ESR-2615 / ESR-2523 * RR25803 FL10667      
HWU No code listing. Please contact us for test data.
HWU3.56/11.25  ESR-2615 / ESR-2523 *   FL10667      
HWU3.56/11.88  ESR-2615 / ESR-2523 *   FL10667      
HWU3.56/9.25  ESR-2615 / ESR-2523 *          
HWU3.56/9.5  ESR-2615 / ESR-2523 *   FL10667      
ITS3.56/11.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITS3.56/11.88  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITS3.56/13  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITS3.56/9.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITS3.56/9.37  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITS3.56/9.5  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITTSee specific model numbers for code listings.
ITT411.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITT411.88  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITT412  ESR-2615 / ESR-2523 *          
ITT413  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITT49.25  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITT49.37  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITT49.5  ESR-2615 / ESR-2523 * RR25803 FL10667      
ITTM411.88 No code listing. Please contact us for test data.
LBVSee specific model numbers for code listings.
LBV3.56/11.25  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.56/11.88  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.56/12  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.56/13  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.56/9.25  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.56/9.37  ESR-1866 / ESR-2523 * RR25802 FL11166      
LBV3.56/9.5  ESR-1866 / ESR-2523 * RR25802 FL11166      
MITSee specific model numbers for code listings.
MIT411.88  ESR-2615 / ESR-2523 * RR25803 FL10667      
MIT49.5  ESR-2615 / ESR-2523 * RR25803 FL10667      
WM No code listing. Please contact us for test data.
WM3.56/11.88  ESR-2877 / ESR-2523 *          
WM3.56/9.5  ESR-2877 / ESR-2523 *          
WMI No code listing. Please contact us for test data.
WMI412  ESR-2877 / ESR-2523 *          
WPISee specific model numbers for code listings.
WPI411.25  ESR-2615 / ESR-2523 *   FL10667      
WPI411.88  ESR-2615 / ESR-2523 *   FL10667      
WPI412 No code listing. Please contact us for test data.
WPI49.25  ESR-2615 / ESR-2523 *   FL10667      
WPI49.5  ESR-2615 / ESR-2523 *   FL10667      
WPUSee specific model numbers for code listings.
WPU3.56/11.88  ESR-2615 / ESR-2523 *   FL10667      

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
B B with top flange sloped down left: DWG | DXF
B series front view: DWG | DXF
B series left view: DWG | DXF
B series right view: DWG | DXF
B series top view: DWG | DXF
B Hanger On I Beam: DWG | DXF
B3.56/11.88None for this model None for this model
BANone for this model None for this model
BA3.56/11.88 BA3.56/11.88: DWG | DXF
BA3.56/11.88 front view: DWG | DXF
BA3.56/11.88 right view: DWG | DXF
BA3.56/11.88 top view: DWG | DXF
None for this model
GLTVNone for this model None for this model
GLTV3.511 GLTV3.511SKL: DWG | DXF
GLTV3.511SKR: DWG | DXF
GLTV3.511: DWG | DXF
GLTV3.511SKL front view: DWG | DXF
GLTV3.511SKR front view: DWG | DXF
GLTV3.511 front view: DWG | DXF
GLTV3.511SKR left view: DWG | DXF
GLTV3.511SKL right view: DWG | DXF
GLTV3.511 right view: DWG | DXF
GLTV3.511SKL top view: DWG | DXF
GLTV3.511SKR top view: DWG | DXF
GLTV3.511 top view: DWG | DXF
None for this model
GLTV3.512None for this model None for this model
GLTV3.56/11.25None for this model None for this model
GLTV3.56/9.25None for this model None for this model
GLTV3.59None for this model None for this model
HB HB series: DWG | DXF
HB series front view: DWG | DXF
HB series left view: DWG | DXF
HB series right view: DWG | DXF
HB series top view: DWG | DXF
HB: DWG | DXF
HB3.56/11.25None for this model None for this model
HB3.56/11.88None for this model None for this model
HB3.56/12None for this model None for this model
HB3.56/9.25None for this model None for this model
HB3.56/9.5None for this model None for this model
HGLTVNone for this model None for this model
HGLTV3.511 HGLTV3.511: DWG | DXF
HGLTV3.511SKL: DWG | DXF
HGLTV3.511SKR: DWG | DXF
HGLTV3.511 front view: DWG | DXF
HGLTV3.511SKL front view: DWG | DXF
HGLTV3.511SKR front view: DWG | DXF
HGLTV3.511SKR left view: DWG | DXF
HGLTV3.511 right view: DWG | DXF
HGLTV3.511SKL right view: DWG | DXF
HGLTV3.511 top view: DWG | DXF
HGLTV3.511SKL top view: DWG | DXF
HGLTV3.511SKR top view: DWG | DXF
None for this model
HGLTV3.512None for this model None for this model
HGLTV3.56/11.25None for this model None for this model
HGLTV3.56/9.25None for this model None for this model
HGLTV3.59None for this model None for this model
HUINone for this model None for this model
HUI411.88TFNone for this model None for this model
HWINone for this model None for this model
HWI411.25None for this model None for this model
HWI411.88None for this model None for this model
HWI412None for this model None for this model
HWI49.25None for this model None for this model
HWI49.5None for this model None for this model
HWUNone for this model None for this model
HWU3.56/11.25None for this model None for this model
HWU3.56/11.88 HWU3.56/11.88: DWG | DXF
HWU3.56/11.88 front view: DWG | DXF
HWU3.56/11.88 right view: DWG | DXF
HWU3.56/-11.88 top view: DWG | DXF
None for this model
HWU3.56/9.25 HWU3.56/9.25: DWG | DXF
HWU3.56/9.25SKL: DWG | DXF
HWU3.56/9.25SKR: DWG | DXF
HWU3.56/9.25 front view: DWG | DXF
HWU3.56/9.25SKL front view: DWG | DXF
HWU3.56/9.25SKR front view: DWG | DXF
HWU3.56/9.25SKR left view: DWG | DXF
HWU3.56/9.25 right view: DWG | DXF
HWU3.56/9.25SKL right view: DWG | DXF
HWU3.56/9.25 top view: DWG | DXF
HWU3.56/9.25SKL top view: DWG | DXF
HWU3.56/9.25SKR top view: DWG | DXF
None for this model
HWU3.56/9.5None for this model None for this model
ITS3.56/11.25None for this model None for this model
ITS3.56/11.88None for this model None for this model
ITS3.56/13None for this model None for this model
ITS3.56/9.25None for this model None for this model
ITS3.56/9.37None for this model None for this model
ITS3.56/9.5None for this model None for this model
ITT ITT series: DWG | DXF
ITT series front view: DWG | DXF
ITT series left view: DWG | DXF
ITT series right view: DWG | DXF
ITT series top view: DWG | DXF
ITT on I Beam with Nailer: DWG | DXF
Flush Framing: DWG | DXF
IUS/ITT Tab Installation 1: DWG | DXF
IUS/ITT Tab Installation 2: DWG | DXF
IUS/ITT Tab Installation 3: DWG | DXF
ITT: DWG | DXF
Web Stiffener 3: DWG | DXF
ITT411.25None for this model None for this model
ITT411.88None for this model None for this model
ITT412None for this model None for this model
ITT413None for this model None for this model
ITT49.25None for this model None for this model
ITT49.37None for this model None for this model
ITT49.5None for this model None for this model
ITTM411.88None for this model None for this model
LBV LBV series: DWG | DXF
LBV series front view: DWG | DXF
LBV series left view: DWG | DXF
LBV series right view: DWG | DXF
LBV series top view: DWG | DXF
None for this model
LBV3.56/11.25None for this model None for this model
LBV3.56/11.88None for this model None for this model
LBV3.56/12None for this model None for this model
LBV3.56/13None for this model None for this model
LBV3.56/9.25None for this model None for this model
LBV3.56/9.37None for this model None for this model
LBV3.56/9.5None for this model None for this model
MIT MIT series: DWG | DXF
MIT series front view: DWG | DXF
MIT series left view: DWG | DXF
MIT series right view: DWG | DXF
MIT series top view: DWG | DXF
MIT Double LVL Installation: DWG | DXF
MIT: DWG | DXF
MIT411.88None for this model None for this model
MIT49.5None for this model None for this model
WMNone for this model WM View 1: DWG | DXF
WM View 2: DWG | DXF
WM Skewed: DWG | DXF
WM3.56/11.88None for this model None for this model
WM3.56/9.5None for this model None for this model
WMINone for this model None for this model
WMI412None for this model None for this model
WPINone for this model None for this model
WPI411.25None for this model None for this model
WPI411.88None for this model None for this model
WPI412None for this model None for this model
WPI49.25None for this model None for this model
WPI49.5None for this model None for this model
WPU WPU series: DWG | DXF
WPU sloped down: DWG | DXF
WPU sloped up: DWG | DXF
WPU skewed left and sloped down: DWG | DXF
WPU skewed left and sloped up: DWG | DXF
WPU skewed right and sloped down: DWG | DXF
WPU skewed right and sloped up: DWG | DXF
WPU series front view: DWG | DXF
WPU sloped down front view: DWG | DXF
WPU sloped up front view: DWG | DXF
WPU skewed left and sloped down front view: DWG | DXF
WPU skewed left and sloped up front view: DWG | DXF
WPU skewed right and sloped down front view: DWG | DXF
WPU skewed right and sloped up front view: DWG | DXF
WPU series left view: DWG | DXF
WPU sloped down left view: DWG | DXF
WPU sloped up left view: DWG | DXF
WPU series right view: DWG | DXF
WPU sloped down right view: DWG | DXF
WPU sloped up right view: DWG | DXF
WPU series top view: DWG | DXF
WPU sloped down top view: DWG | DXF
WPU sloped up top view: DWG | DXF
WPU skewed left and sloped down top view: DWG | DXF
WPU skewed left and sloped up top view: DWG | DXF
WPU skewed right and sloped down top view: DWG | DXF
WPU skewed right and sloped up top view: DWG | DXF
None for this model
WPU3.56/11.88 WPU3.56/11.88: DWG | DXF
WPU3.56/11.88 front view: DWG | DXF
WPU3.56/11.88 right view: DWG | DXF
WPU3.56/11.88 top view: DWG | DXF
None for this model

   
top
Catalog Pages (PDFs):
Order free catalogs by mail
C-2009 (Wood Construction Connectors), page 100
top
Related Categories:
Top Flange Hangers for Solid Sawn Lumber (Wood Construction)
Top Flange Hangers for Engineered Wood Products (Wood Construction)
Top Flange Hangers for Glulam Products (Wood Construction)
top
Need help with downloads?

Home | About Simpson | Contact Simpson | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson's newsletters

Copyright © 2009, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2009 Simpson Strong-Tie®