www.strongtie.com


>>Home   > All Products - Alphabetical List    > Top Flange Hangers Load Tables

Top Flange Hangers Load Tables:
I-Joists & Structural Composite Lumber

  Print this page
Link to email this page to a friend  Email this page to a friend
  Code Reports
 
       
 
  All Top Flange Hanger Load Tables
 
  1. Loads may not be increased for short-term loading.
  2. Uplift loads are based on DF/SP lumber and have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction refer to Simpson Strong Tie® Connector Selector™ software or conservatively divide the uplift load by 1.6. For SPF/HF use 0.86 x DF/SP uplift load.
  3. WM loads listed are based on embedded installation (mid-wall) into a masonry block wall. (See W/WPU/WNP/WM/WMU/HW/HWU/GLT/HGLT)
  4. When I-joist is used as header, all nails must be 10dx1 1/2 and allowable loads assume flanges that are at least 1 1/2" thick made of Douglas Fir, LVL or LSL. For other flange thicknesses, apply load adjustment factors found in the table below.
  5. Hangers sorted in order of recommended selection for best overall performance and installation value.
  6. Other nail schedules and loads are listed on individual hanger pages: ITS/ITT/MIT/HIT, LBV/BA/B/HB and W/WP/WPU/WM/WMU/HW/HWU.
  7. See code reports.
  8. Web stiffeners are required where noted and when supporting double I-joists with flanges less than 1 5/16" thick.
  9. For 2 1/4"x22" and 24" joist sizes, refer to technical bulletin T-BSERIES08.
  10. NAILS: 16d and 16d DPLX = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2= 0.148" dia. x 1 1/2" long. See other nail sizes and information.

Parallam® is a registered trademark of iLevel by Weyerhaeuser.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO ES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
GLTVSee specific model numbers for code listings.
GLTV3.520  ESR-2615 / ESR-2523 * RR25803 FL10667    
HBNo code listing: Please contact us for test data.
HB3.56/22  ESR-1866 / ESR-2523 *   FL11166    
HB3.56/24  ESR-1866 / ESR-2523 *   FL11166    
HB3.56/26  ESR-1866 / ESR-2523 *   FL11166    
HB3.56/28  ESR-1866 / ESR-2523 *   FL11166    
HB3.56/30  ESR-1866 / ESR-2523 *   FL11166    
HGLTVSee specific model numbers for code listings.
HGLTV3.520  ESR-2615 / ESR-2523 * RR25803 FL10667    
HITSee specific model numbers for code listings.
HIT422  ESR-2615 / ESR-2523 * RR25803 FL10667    
HIT424  ESR-2615 / ESR-2523 * RR25803 FL10667    
HIT426  ESR-2615 / ESR-2523 * RR25803 FL10667    
HWINo code listing: Please contact us for test data.
HWI420  ESR-2615 / ESR-2523 * RR25803 FL10667    
HWI422  ESR-2615 / ESR-2523 * RR25803 FL10667    
HWI424  ESR-2615 / ESR-2523 * RR25803 FL10667    
HWI426  ESR-2615 / ESR-2523 * RR25803 FL10667    
HWI428  ESR-2615 / ESR-2523 * RR25803 FL10667    
HWI430  ESR-2615 / ESR-2523 * RR25803 FL10667    
HWI432  ESR-2615 / ESR-2523 *        
HWUNo code listing: Please contact us for test data.
HWU3.56/20  ESR-2615 / ESR-2523 *   FL10667    
LBVSee specific model numbers for code listings.
LBV3.56/22  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV3.56/24  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV3.56/26  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV3.56/28  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV3.56/30  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.12/11.88  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.12/14  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.12/16  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.12/9.5  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.28/11.88  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.28/14  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.28/16  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.28/9.5  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.75/11.88  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.75/14  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.75/16  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.75/9.5  ESR-1866 / ESR-2523 * RR25802 FL11166    
MITSee specific model numbers for code listings.
MIT3511.88-2  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT3514-2  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT359.5-2  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT4.12/11.88  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT4.12/14  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT4.12/9.5  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT4.28/11.88  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT4.28/14  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT4.28/9.5  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT4.75/16  ESR-2615 / ESR-2523 * RR25803 FL10667    
WMNo code listing: Please contact us for test data.
WM3511.88-2  ESR-2877 / ESR-2523 *        
WM3514-2No code listing: Please contact us for test data.
WM3516-2  ESR-2877 / ESR-2523 *        
WMINo code listing: Please contact us for test data.
WMI420  ESR-2877 / ESR-2523 *        
WPNo code listing: Please contact us for test data.
WP3511.88-2  ESR-2615 / ESR-2523 *        
WP3514-2  ESR-2615 / ESR-2523 *   FL10667    
WP359.5-2  ESR-2615 / ESR-2523 *   FL10667    
WPISee specific model numbers for code listings.
WPI422  ESR-2615 / ESR-2523 *   FL10667    
WPI424  ESR-2615 / ESR-2523 *   FL10667    
WPI426  ESR-2615 / ESR-2523 *   FL10667    
WPI428  ESR-2615 / ESR-2523 *   FL10667    
WPI430  ESR-2615 / ESR-2523 *   FL10667    
WPI432  ESR-2615 / ESR-2523 *   FL10667    
WPUSee specific model numbers for code listings.
WPU3.56/22  ESR-2615 / ESR-2523 *   FL10667    
WPU3.56/24  ESR-2615 / ESR-2523 *   FL10667    
WPU3.56/26  ESR-2615 / ESR-2523 *   FL10667    
WPU3.56/28  ESR-2615 / ESR-2523 *   FL10667    

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
GLTVNone for this model None for this model
GLTV3.520None for this model None for this model
HB HB series: DWG | DXF
HB series front view: DWG | DXF
HB series left view: DWG | DXF
HB series right view: DWG | DXF
HB series top view: DWG | DXF
HB: DWG | DXF
HB3.56/22None for this model None for this model
HB3.56/24None for this model None for this model
HB3.56/26None for this model None for this model
HB3.56/28None for this model None for this model
HB3.56/30None for this model None for this model
HGLTVNone for this model None for this model
HGLTV3.520None for this model None for this model
HITNone for this model None for this model
HIT422 HIT422: DWG | DXF
HIT422 front view: DWG | DXF
HIT422 left view: DWG | DXF
HIT422 right view: DWG | DXF
HIT422 top view: DWG | DXF
None for this model
HIT424 HIT424: DWG | DXF
HIT424 front view: DWG | DXF
HIT424 left view: DWG | DXF
HIT424 right view: DWG | DXF
HIT424 top view: DWG | DXF
None for this model
HIT426None for this model None for this model
HWINone for this model None for this model
HWI420None for this model None for this model
HWI422None for this model None for this model
HWI424None for this model None for this model
HWI426None for this model None for this model
HWI428None for this model None for this model
HWI430None for this model None for this model
HWI432None for this model None for this model
HWUNone for this model None for this model
HWU3.56/20None for this model None for this model
LBV LBV series: DWG | DXF
LBV series front view: DWG | DXF
LBV series left view: DWG | DXF
LBV series right view: DWG | DXF
LBV series top view: DWG | DXF
None for this model
LBV3.56/22None for this model None for this model
LBV3.56/24None for this model None for this model
LBV3.56/26None for this model None for this model
LBV3.56/28None for this model None for this model
LBV3.56/30None for this model None for this model
LBV4.12/11.88None for this model None for this model
LBV4.12/14None for this model None for this model
LBV4.12/16None for this model None for this model
LBV4.12/9.5None for this model None for this model
LBV4.28/11.88None for this model None for this model
LBV4.28/14None for this model None for this model
LBV4.28/16None for this model None for this model
LBV4.28/9.5None for this model None for this model
LBV4.75/11.88None for this model None for this model
LBV4.75/14None for this model None for this model
LBV4.75/16None for this model None for this model
LBV4.75/9.5None for this model None for this model
MIT MIT series: DWG | DXF
MIT series front view: DWG | DXF
MIT series left view: DWG | DXF
MIT series right view: DWG | DXF
MIT series top view: DWG | DXF
MIT: DWG | DXF
MIT Double LVL Installation: DWG | DXF
MIT3511.88-2None for this model None for this model
MIT3514-2None for this model None for this model
MIT359.5-2None for this model None for this model
MIT4.12/11.88None for this model None for this model
MIT4.12/14None for this model None for this model
MIT4.12/9.5None for this model None for this model
MIT4.28/11.88None for this model None for this model
MIT4.28/14None for this model None for this model
MIT4.28/9.5None for this model None for this model
MIT4.75/16None for this model None for this model
WMNone for this model WM View 1: DWG | DXF
WM View 2: DWG | DXF
WM Skewed: DWG | DXF
WM3511.88-2None for this model None for this model
WM3514-2None for this model None for this model
WM3516-2None for this model None for this model
WMINone for this model None for this model
WMI420None for this model None for this model
WPNone for this model WP Skewed: DWG | DXF
WP3511.88-2None for this model None for this model
WP3514-2None for this model None for this model
WP359.5-2None for this model None for this model
WPINone for this model None for this model
WPI422None for this model None for this model
WPI424None for this model None for this model
WPI426None for this model None for this model
WPI428None for this model None for this model
WPI430None for this model None for this model
WPI432None for this model None for this model
WPU WPU series: DWG | DXF
WPU skewed left and sloped down: DWG | DXF
WPU skewed left and sloped up: DWG | DXF
WPU skewed right and sloped down: DWG | DXF
WPU skewed right and sloped up: DWG | DXF
WPU sloped down: DWG | DXF
WPU sloped up: DWG | DXF
WPU series front view: DWG | DXF
WPU skewed left and sloped down front view: DWG | DXF
WPU skewed left and sloped up front view: DWG | DXF
WPU skewed right and sloped down front view: DWG | DXF
WPU skewed right and sloped up front view: DWG | DXF
WPU sloped down front view: DWG | DXF
WPU sloped up front view: DWG | DXF
WPU series left view: DWG | DXF
WPU sloped down left view: DWG | DXF
WPU sloped up left view: DWG | DXF
WPU series right view: DWG | DXF
WPU sloped down right view: DWG | DXF
WPU sloped up right view: DWG | DXF
WPU skewed left and sloped down top view: DWG | DXF
WPU skewed left and sloped up top view: DWG | DXF
WPU skewed right and sloped down top view: DWG | DXF
WPU skewed right and sloped up top view: DWG | DXF
WPU sloped down top view: DWG | DXF
WPU sloped up top view: DWG | DXF
WPU series top view: DWG | DXF
None for this model
WPU3.56/22None for this model None for this model
WPU3.56/24None for this model None for this model
WPU3.56/26None for this model None for this model
WPU3.56/28None for this model None for this model

   
top
Catalog Pages (PDFs):
Order free catalogs by mail
C-2009 (Wood Construction Connectors), page 102
top
Related Categories:
Top Flange Hangers for Engineered Wood Products (Wood Construction)
Top Flange Hangers for Glulam Products (Wood Construction)
Top Flange Hangers for Solid Sawn Lumber (Wood Construction)
top
Need help with downloads?

Home | About Simpson Strong-Tie | Contact Simpson Strong-Tie | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson Strong-Tie newsletters

Copyright © 2010, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2010 Simpson Strong-Tie®