www.strongtie.com


>>Home   > All Products - Alphabetical List    > Top Flange Hangers Load Tables

Top Flange Hangers Load Tables:
I-Joists & Structural Composite Lumber

  Print this page
Link to email this page to a friend  Email this page to a friend
  Code Reports
 
       
 
  All Top Flange Hanger Load Tables
 
  1. Loads may not be increased for short-term loading.
  2. Uplift loads are based on DF/SP lumber and have been increased 60% for wind or earthquake loading with no further increase allowed. For normal loading applications such as cantilever construction refer to Simpson Strong Tie® Connector Selector™ software or conservatively divide the uplift load by 1.6. For SPF/HF use 0.86 x DF/SP uplift load.
  3. WM loads listed are based on embedded installation (mid-wall) into a masonry block wall. (See W/WPU/WNP/WM/WMU/HW/HWU/GLT/HGLT)
  4. When I-joist is used as header, all nails must be 10dx1 1/2 and allowable loads assume flanges that are at least 1 1/2" thick made of Douglas Fir, LVL or LSL. For other flange thicknesses, apply load adjustment factors found in the table below.
  5. Hangers sorted in order of recommended selection for best overall performance and installation value.
  6. Other nail schedules and loads are listed on individual hanger pages: ITS/ITT/MIT/HIT, LBV/BA/B/HB and W/WP/WPU/WM/WMU/HW/HWU.
  7. See code reports.
  8. Web stiffeners are required where noted and when supporting double I-joists with flanges less than 1 5/16" thick.
  9. For 2 1/4"x22" and 24" joist sizes, refer to technical bulletin T-BSERIES08.
  10. NAILS: 16d and 16d DPLX = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2= 0.148" dia. x 1 1/2" long. See other nail sizes and information.

Parallam® is a registered trademark of iLevel by Weyerhaeuser.

next  top Code Reports (PDFs):
Legacy Reports
  IAPMO ES ER ICC-ES ESR CITY OF LOS ANGELES STATE OF FLORIDA ICC-ES NER ICC-ES ER ICC-ES ES
BSee specific model numbers for code listings.
B5.12/18  ESR-1866 / ESR-2523 * RR25802 FL11166    
B5.12/20  ESR-1866 / ESR-2523 * RR25802 FL11166    
B5.12/22  ESR-1866 / ESR-2523 * RR25802 FL11166    
B5.12/24  ESR-1866 / ESR-2523 * RR25802 FL11166    
B5.12/26  ESR-1866 / ESR-2523 * RR25802 FL11166    
B5.12/28  ESR-1866 / ESR-2523 * RR25802 FL11166    
B5.12/30  ESR-1866 / ESR-2523 * RR25802 FL11166    
GLTV5.50/11.25  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLTV5.50/9.25  ESR-2615 / ESR-2523 * RR25803 FL10667    
GLTV5.59  ESR-2615 / ESR-2523 * RR25803 FL10667    
HBNo code listing: Please contact us for test data.
HB5.12/16  ESR-1866 / ESR-2523 *   FL11166    
HB5.12/18  ESR-1866 / ESR-2523 *   FL11166    
HB5.12/20  ESR-1866 / ESR-2523 *   FL11166    
HB5.12/22  ESR-1866 / ESR-2523 *   FL11166    
HB5.12/24  ESR-1866 / ESR-2523 *   FL11166    
HB5.12/26  ESR-1866 / ESR-2523 *   FL11166    
HB5.12/28  ESR-1866 / ESR-2523 *   FL11166    
HB5.12/30  ESR-1866 / ESR-2523 *   FL11166    
HB5.50/11.25  ESR-1866 / ESR-2523 *   FL11166    
HB5.50/7.25No code listing: Please contact us for test data.
HB5.50/9.25  ESR-1866 / ESR-2523 *   FL11166    
HB5.50/9.5  ESR-1866 / ESR-2523 *   FL11166    
HGLTV5.59  ESR-2615 / ESR-2523 * RR25803 FL10667    
HWU5.50/11.25  ESR-2615 / ESR-2523 *        
HWU5.50/9.25  ESR-2615 / ESR-2523 *        
HWU5.50/9.5  ESR-2615 / ESR-2523 *   FL10667    
LBVSee specific model numbers for code listings.
LBV4.75/14  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.75/16  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.75/18  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV4.75/20  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV5.12/11.25  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV5.12/11.88  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV5.12/14  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV5.12/16  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV5.12/9.25  ESR-1866 / ESR-2523 * RR25802 FL11166    
LBV5.12/9.5  ESR-1866 / ESR-2523 * RR25802 FL11166    
MITSee specific model numbers for code listings.
MIT311.88-2  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT314-2  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT3514-2  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT39.5-2  ESR-2615 / ESR-2523 * RR25803 FL10667    
MIT5.12/16  ESR-2615 / ESR-2523 * RR25803 FL10667    
WMNo code listing: Please contact us for test data.
WM3514-2No code listing: Please contact us for test data.
WM3516-2  ESR-2877 / ESR-2523 *        
WM3518-2  ESR-2877 / ESR-2523 *        
WM3520-2  ESR-2877 / ESR-2523 *        
WM5.50/9.5  ESR-2877 / ESR-2523 *        
WPNo code listing: Please contact us for test data.
WP3514-2  ESR-2615 / ESR-2523 *   FL10667    
WP3516-2  ESR-2615 / ESR-2523 *   FL10667    
WP3518-2  ESR-2615 / ESR-2523 *   FL10667    
WP3520-2  ESR-2615 / ESR-2523 *   FL10667    
WP5.50/9.5  ESR-2615 / ESR-2523 *   FL10667    
WPISee specific model numbers for code listings.
WPI311.88-2  ESR-2615 / ESR-2523 *   FL10667    
WPI314-2  ESR-2615 / ESR-2523 *   FL10667    
WPI316-2  ESR-2615 / ESR-2523 *   FL10667    
WPI318-2  ESR-2615 / ESR-2523 *   FL10667    
WPI320-2  ESR-2615 / ESR-2523 *   FL10667    
WPI322-2  ESR-2615 / ESR-2523 *   FL10667    
WPI324-2  ESR-2615 / ESR-2523 *   FL10667    
WPI326-2  ESR-2615 / ESR-2523 *   FL10667    
WPI39.5-2  ESR-2615 / ESR-2523 *   FL10667    
WPUSee specific model numbers for code listings.
WPU5.50/7.25  ESR-2615 / ESR-2523 *   FL10667    

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction



next  topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."
Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

 ORTHOGRAPHIC
PERSPECTIVE
B B with top flange sloped down left: DWG | DXF
B series front view: DWG | DXF
B series left view: DWG | DXF
B series right view: DWG | DXF
B series top view: DWG | DXF
B Hanger On I Beam: DWG | DXF
B5.12/18None for this model None for this model
B5.12/20None for this model None for this model
B5.12/22None for this model None for this model
B5.12/24None for this model None for this model
B5.12/26None for this model None for this model
B5.12/28None for this model None for this model
B5.12/30None for this model None for this model
GLTV5.50/11.25None for this model None for this model
GLTV5.50/9.25None for this model None for this model
GLTV5.59None for this model None for this model
HB HB series: DWG | DXF
HB series front view: DWG | DXF
HB series left view: DWG | DXF
HB series right view: DWG | DXF
HB series top view: DWG | DXF
HB: DWG | DXF
HB5.12/16None for this model None for this model
HB5.12/18None for this model None for this model
HB5.12/20None for this model None for this model
HB5.12/22None for this model None for this model
HB5.12/24None for this model None for this model
HB5.12/26None for this model None for this model
HB5.12/28None for this model None for this model
HB5.12/30None for this model None for this model
HB5.50/11.25None for this model None for this model
HB5.50/7.25None for this model None for this model
HB5.50/9.25None for this model None for this model
HB5.50/9.5None for this model None for this model
HGLTV5.59None for this model None for this model
HWU5.50/11.25None for this model None for this model
HWU5.50/9.25None for this model None for this model
HWU5.50/9.5None for this model None for this model
LBV LBV series: DWG | DXF
LBV series front view: DWG | DXF
LBV series left view: DWG | DXF
LBV series right view: DWG | DXF
LBV series top view: DWG | DXF
None for this model
LBV4.75/14None for this model None for this model
LBV4.75/16None for this model None for this model
LBV4.75/18None for this model None for this model
LBV4.75/20None for this model None for this model
LBV5.12/11.25None for this model None for this model
LBV5.12/11.88None for this model None for this model
LBV5.12/14None for this model None for this model
LBV5.12/16None for this model None for this model
LBV5.12/9.25None for this model None for this model
LBV5.12/9.5None for this model None for this model
MIT MIT series: DWG | DXF
MIT series front view: DWG | DXF
MIT series left view: DWG | DXF
MIT series right view: DWG | DXF
MIT series top view: DWG | DXF
MIT: DWG | DXF
MIT Double LVL Installation: DWG | DXF
MIT311.88-2None for this model None for this model
MIT314-2None for this model None for this model
MIT3514-2None for this model None for this model
MIT39.5-2None for this model None for this model
MIT5.12/16None for this model None for this model
WMNone for this model WM View 1: DWG | DXF
WM View 2: DWG | DXF
WM Skewed: DWG | DXF
WM3514-2None for this model None for this model
WM3516-2None for this model None for this model
WM3518-2None for this model None for this model
WM3520-2None for this model None for this model
WM5.50/9.5None for this model None for this model
WPNone for this model WP Skewed: DWG | DXF
WP3514-2None for this model None for this model
WP3516-2None for this model None for this model
WP3518-2None for this model None for this model
WP3520-2None for this model None for this model
WP5.50/9.5None for this model None for this model
WPINone for this model None for this model
WPI311.88-2None for this model None for this model
WPI314-2 WPI314-2: DWG | DXF
WPI314-2SKL: DWG | DXF
WPI314-2SKR: DWG | DXF
WPI314-2 front view: DWG | DXF
WPI314-2SKL front view: DWG | DXF
WPI314-2SKR front view: DWG | DXF
WPI314-2 left view: DWG | DXF
WPI314-2SKR left view: DWG | DXF
WPI314-2SKL right view: DWG | DXF
WPI314-2SKL top view: DWG | DXF
WPI314-2SKR top view: DWG | DXF
WPI314-2 top view: DWG | DXF
None for this model
WPI316-2None for this model None for this model
WPI318-2None for this model None for this model
WPI320-2None for this model None for this model
WPI322-2None for this model None for this model
WPI324-2None for this model None for this model
WPI326-2None for this model None for this model
WPI39.5-2None for this model None for this model
WPU WPU series: DWG | DXF
WPU skewed left and sloped down: DWG | DXF
WPU skewed left and sloped up: DWG | DXF
WPU skewed right and sloped down: DWG | DXF
WPU skewed right and sloped up: DWG | DXF
WPU sloped down: DWG | DXF
WPU sloped up: DWG | DXF
WPU series front view: DWG | DXF
WPU skewed left and sloped down front view: DWG | DXF
WPU skewed left and sloped up front view: DWG | DXF
WPU skewed right and sloped down front view: DWG | DXF
WPU skewed right and sloped up front view: DWG | DXF
WPU sloped down front view: DWG | DXF
WPU sloped up front view: DWG | DXF
WPU series left view: DWG | DXF
WPU sloped down left view: DWG | DXF
WPU sloped up left view: DWG | DXF
WPU series right view: DWG | DXF
WPU sloped down right view: DWG | DXF
WPU sloped up right view: DWG | DXF
WPU skewed left and sloped down top view: DWG | DXF
WPU skewed left and sloped up top view: DWG | DXF
WPU skewed right and sloped down top view: DWG | DXF
WPU skewed right and sloped up top view: DWG | DXF
WPU sloped down top view: DWG | DXF
WPU sloped up top view: DWG | DXF
WPU series top view: DWG | DXF
None for this model
WPU5.50/7.25None for this model None for this model

   
top
Catalog Pages (PDFs):
Order free catalogs by mail
C-2009 (Wood Construction Connectors), page 103
top
Related Categories:
Top Flange Hangers for Solid Sawn Lumber (Wood Construction)
Top Flange Hangers for Engineered Wood Products (Wood Construction)
Top Flange Hangers for Glulam Products (Wood Construction)
top
Need help with downloads?

Home | About Simpson Strong-Tie | Contact Simpson Strong-Tie | Browse Products | Product Use Information
Privacy Policy | User Agreement | Limited Warranty | Parent Company

Stay informed! Sign up for Simpson Strong-Tie newsletters

Copyright © 2010, Simpson Strong-Tie Company Inc. All Rights Reserved
Contact Webmaster with questions or comments.

Printed from
© 2010 Simpson Strong-Tie®