LSU/LSSU/LSSUI Light Slopeable/Skewable U Hangers for I-Joists and SCL

This series attaches joists or rafters to headers, sloped up or down, and skewed left or right, up to 45°.

Material: See table.

Finish: Galvanized

Installation:

Use all specified fasteners. See General Notes.
Attach the sloped joist at both ends so that the horizontal force developed by the slope is fully supported by the supporting members.
Web stiffeners required for I-joist applications.
Watch an installation video.

roll over images below to see larger image

LSSU410
(LSSU210-2, LSSUH310 similar)

The LSU5.12 must be factory- skewed 0° to 45°. It may be field-sloped to 45°.
(LSU4.12, LSU4.28 and LSU3510-2 similar)

Hanger shown skewed right

roll over images below to see larger image


Step 1 Nail hanger to slope-cut carried member, installing seat nail first. No bevel necessary. Install joist nails at 45° angle.	Step 2 Skew flange from 0-45°. Bend other flange back along centerline of slots. Bend one time only.	Step 3 Attach hanger to the carrying member, acute angle side first (see footnote 5). Install nails at an angle.

Roof loads are 125% of floor loads unless limited by other criteria.
Uplift loads include a 33% and 60% increase for wind or earthquake loading; no further increase is allowed; reduce where other loads govern.
LSU3510-2, LSU4.12, LSU4.28 and LSU5.12 skew option must be factory-ordered.
Minimum 11" joist height for LSU3510-2, LSU4.12, LSU5.12; 9 1/2" for all others.
For skewed LSSU/LSSUI hangers, the inner most face fasteners on the acute angle side are not installed.
10dx1 1/2" nails may not be used for face nails on skewed or sloped and skewed LSU/LSSU/LSSUI hangers.
NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long. See other nail sizes and information.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
LSSU2.1	No code listing: Please contact us for test data.
LSSU210		ESR-2551 / ESR-2523 *	RR25074	FL10447
LSSU210-2		ESR-2551 / ESR-2523 *	RR25076	FL10447
LSSU410		ESR-2551 / ESR-2523 *	RR25076	FL10447
LSSUH310	No code listing: Please contact us for test data.
LSSUI2.06	No code listing: Please contact us for test data.
LSSUI25		ESR-2551 / ESR-2523 *	RR25074	FL10447
LSSUI35		ESR-2551 / ESR-2523 *	RR25074	FL10447
LSU3510-2	No code listing: Please contact us for test data.
LSU4.12	No code listing: Please contact us for test data.
LSU4.28	No code listing: Please contact us for test data.
LSU5.12	No code listing: Please contact us for test data.

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction