Titen® Screws

Titen® Hex Head

www.strongtie.com

>>Home > All Products - Alphabetical List

Titen® Screws

Titen screws are 3/16" and 1/4" diameter masonry screws for attaching various components to concrete and masonry. Available in hex and phillips head designs in three colors. Use with appropriately sized Titen drill bits included with each box.

See Simpson Anchor Systems for full Titen Screw details.

WARNING: Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior, and noncorrosive environments only.

top Gallery:

roll over images below to see larger image

top Load Table: Titen Screw Anchors See code report listings below

The Designer shall verify allowable load of the attached member or element as it may govern the allowable load.
Screws should be installed with the drill in rotation only mode.

top Load Table: Titen Screw Anchors for Concrete See code report listings below

Allowable loads may not be increased for short term loading due to wind or seismic forces.
Concrete shall have a minimum f'_c = 2000 psi. CMU is based on installation into face shell of hollow and grout-filled CMU.
The attached member or element may govern the allowable load. The designer shall verify allowable load.
Refer to Simpson Anchor Systems for complete information on the Titen screws.

top Code Reports (PDFs):

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
TITEN HD		ESR-1056	RR25560	FL2304
TTN Masonry Screw				FL2355