www.strongtie.com


Specialty Products

Epoxy

  • FX-738Metal-Filled Epoxy Paste
    FX-738 Metal-Filled Epoxy is a two-component, 100% solids, moisture-tolerant, non-sag, trowel-grade epoxy designed to repair most metal surfaces found in transportation, industrial, marine, petrochemical and power generation facilities. Available in standard and slow-set (FX-763S) versions.

Fillers

  • FX-701Oven-Dried Graded Silica Filler (Medium)
    FX-701 Oven-Dried Graded Silica Filler is a special blend of medium-sized aggregates designed for use with various epoxy resin systems and broadcast flooring applications.

Curing Compounds

  • FX-15Water-Based Cure and Seal
    FX-15 Water-Based Cure and Seal is an acrylic emulsion, resistant to yellowing from UV exposure. It is designed to prevent rapid water loss during the curing process of freshly placed concrete. Applied to hardened concrete, FX-15 has a glossy sheen that protects concrete from staining and reduces dusting.

Rail

  • FX-120Elastomeric Mortar System
    FX-120 Elastomeric Mortar System is a three-component elastomeric mortar that combines a specially formulated epoxy and rubber granule aggregate to control stray electrical current, isolate vibration, and dampen noise for embedded rail applications. FX-120 is chemical-resistant, unaffected by freeze/thaw cycles and flexes under impact/loading. Used with FX-120P Primer (sold separately).
  • FX-583Polyurethane Isolation Grout
    FX-583 Polyurethane Isolation Grout is a three-component anchoring grout designed specifically to isolate stray electrical current and dampen sound and vibration in transit rail applications. FX-583 is formulated to securely anchor rail in interior or exterior environments, creating a flexible seal.
  • FX-587High-Durometer Polyurethane Isolation Grout
    FX-587 High-Durometer Polyurethane Isolation Grout is a three-component, anchoring grout designed specifically to isolate stray electrical current and dampen sound and vibration in transit rail applications. FX-587 is formulated to securely anchor rail in interior or exterior environments, creating a flexible seal.
  • FX-816Low-Temperature Polyester Grout
    FX-816 Low-Temperature Polyester Grout is a three-component, 100% solids, fast-setting, flowable, polyester-based grout designed for anchoring bolts in rail and track applications where reduced downtime is required. Recommended for applications below 50°F (10°C).
  • FX-830Polyester Grout
    FX-830 Polyester Grout is a three-component, 100% solids, fast-stetting, flowable, polyester-based grout designed for anchoring bolts in rail and track applications where reduced downtime is required. Recommended for applications above 50°F (10°C).

Underwater

  • FX-70-8DPUnderwater Repair Mortar
    FX-70-8DP Underwater Repair Mortar is a single-component, rapid-hardening, cementitious repair mortar designed for hand-pack applications underwater.
  • FX-764Splash Zone and Underwater Paste
    FX-764 Splash Zone and Underwater Paste is a two-component, 100% solids, moisture-tolerant, non-sag, trowel-grade epoxy designed for use in underwater applications. FX-764 is ideal for underwater crack sealing, securing injection ports, anchoring, doweling, pinning, and general repair of concrete, steel and wood.

Grouts

Cementitious

  • FX-228®High-Strength Non-Shrink Precision Grout
    FX-228 High- Strength Non-Shrink Precision Grout is a high-performance, non-metallic grout developed for long working time and rapid strength gain.
  • FX-229Non-Metallic Non-Shrink Grout
    FX-229 Non-Metallic Non-Shrink Construction Grout is a high-performance, non-metallic grout developed for long working time and rapid strength gain.

Epoxy

  • FX-1200Industrial Epoxy Grout
    FX-1200 Industrial Epoxy Grout is a three-component, flowable, self-leveling grout composed of 100% solids epoxy resin and proprietary aggregate.

Solvents

  • FX-JETSET CleanerSolvent
    FX-JETSET Cleaner is a specially formulated solvent designed to dissolve and remove partially or fully-cured FX-JETSET products from pumping equipment, hoses, ports, and other installation components.
  • FX-JETSET Safety CleanerSolvent
    FX-JETSET Safety Cleaner is a specially formulated, non-flammable solvent designed to dissolve and remove partially or fully cured FX-JETSET products from pumping equipment, hoses, ports, and other installation components.
  • FX-Epoxy CleanerSolvent
    FX-Epoxy Cleaner is a specially formulated solvent designed to clean and remove epoxy residue from installation equipment and other surfaces.

Printed from
© 2014 Simpson Strong-Tie Company Inc.