A complete stacked wall solution for two-story applications. Now there is a Steel Strong-Wall option for two-story installations that combines simplified installation with superior performance.

• Some of the highest loads in the industry, and design procedures that account for cumulative overturning, see Cumulative Overturning for more information.
• Complete concrete anchorage designs for two-story applications (foundation design by Engineer of Record).
• No bearing plates to install. Walls can now be placed flush against a corner.
• Same anchor bolt template as single story installation.
• Compression loads transferred by nut/rod – reducing wood crushing under load.
• Complete kit available to simplify the connection between the walls.

1. See Standard Application on Concrete Foundations for product data on top walls.

Material: Vertical Panel - 10 gauge

Finish: Vertical Panel - Galvanized; Top and Base Plates - Simpson gray paint

Naming Scheme:

Wall Profiles:
Pre-attached wood studs are 2x4 for walls 7' - 10' tall, and 2x6 for walls 11' - 13' tall.

SSW15	SSW15
SSW18	SSW18
SSW21	SSW21
SSW24	SSW24

• 1997 UBC and 2000 IBC Allowable Shear & Drift Values (PDF)
• 2003 and 2006 IBC Allowable Shear & Drift Values (PDF)
• Uplift Equations (PDF)

Load tables list values based upon results from the most recent testing and/or calculations and may not match those in current code reports. Where code jurisdictions apply, consult the current reports for applicable load values.

• Two Story Design Example & First Story Drift Equation (PDF)