3G adhesive family. Bonded by versatility.

Simpson Strong-Tie has a complete line of epoxy and hybrid-acrylic adhesive anchors that provide a high-strength hold. They’re code-listed for cracked and uncracked concrete, easy to install, and suitable for a wide range of applications.

Consider these factors when choosing an anchoring adhesive: your application, the base material, the type of insert, the load requirements, environmental conditions, and the cure time. That’s why we offer SET-3G^® , ET-3G^™ and AT-3G^™ to handle any job.

Adhesives

SET-3G

High-Strength Epoxy Adhesive
SET-3G epoxy anchoring adhesive is formulated to provide superior performance at elevated temperature. SET-3G is an ideal product for installing anchors in cracked and uncracked concrete.

ET-3G

Epoxy Adhesive
ET-3G is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked).

AT-3G

High-Strength Hybrid Acrylic Adhesive
AT-3G is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications.

Accessories

Adhesive accessories

Nylon and Wire Hole-Cleaning Brushes
Dispensing Tools-Battery Powered and Pneumatic-Manual
Adhesive Nozzles
Opti-Mesh Screen Tubes (for materials that are hollow or contain voids)

Piston plug delivery system

Simpson Strong-Tie offers an easy-to-use way to dispense adhesive into drilled holes for threaded rod and rebar installations in overhead, upwardly inclined and horizontal orientations.

Application and installation gallery

Comparison chart

How to install anchoring adhesives

See how to install anchoring adhesives in dry, damp, wet, water-filled or submerged-hole conditions.

Piston plug adhesive delivery

Piston plug adhesive delivery system

The Simpson Strong-Tie Adhesive Piston Plug Delivery System offers a reliable, time-saving and easy-to-use method for dispensing adhesive into drilled holes.

Software

Competitor Cross-Reference Tool

Easily identify the Simpson Strong-Tie® alternative to specified product(s) that are similar.

Anchor Designer™

Perform anchorage design in accordance with the strength design provisions of ACI 318 or CSA A23.3 for cracked and uncracked concrete conditions.

Adhesive Cartridge Estimator (ACE)

Easily estimate how much adhesive you will need for your project, including threaded rod and rebar doweling, and crack injection.

Product Submittal Generator (PSG)

Quickly create submittal packets with product information, code reports and other documents for the Simpson Strong-Tie products you need for your project.

Post-to-Foundation Designer

Easily design holdowns and anchors that resist uplift loads per latest building codes. For a given uplift load, quickly identify cost-effective Simpson products by filtering thousands of solutions.

Rebar Development Length Calculator

Calculate ACI 318 tension and compression development lengths for designing post-installed rebar in concrete conditions.

Resources

Literature and catalog

Anchoring, Fastening, Restoration and Strengthening Systems for Concrete and Masonry Catalog