We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Strong-Rod® Systems Threaded Rod (ATS-SR)

Strong-Rod® Systems Threaded Rod

On This Page

This product is only available in Canada

The Strong-Rod ATS-SR rod is a tension transfer element within the anchor tiedown system (ATS) for shearwall overturning restraint. These rods are threaded on both ends, with the top end having 12" or 48" of thread to allow for the distance that the rod sticks through the device, which can vary. ATS rods feature etched information on the shank that allows for easy identification in the field.

Key Features

  • Available in diameters up to 2"
  • UNC Class 2A thread specifications

Finish

  • Uncoated black steel

Installation

  • When placing the rod, the most commonly used procedure involves dropping in (or pushing up) the rod through the drilled holes in the flooring system after framing has been completed
  • Drilled holes through the sill plate and flooring system should be completed with one continuous drilling action
  • See installation animations in the Image & Video Gallery for further description

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
These products are only available in Canada
Model No. Dia. (in.) Length (ft.)
ATS-SR10-10 1 1/4 10
ATS-SR10-11 1 1/4 11
ATS-SR10-12 1 1/4 12
ATS-SR10-3 1 1/4 3
ATS-SR10-4 1 1/4 4
ATS-SR10-5 1 1/4 5
ATS-SR10-6 1 1/4 6
ATS-SR10-7 1 1/4 7
ATS-SR10-8 1 1/4 8
ATS-SR10-9 1 1/4 9
ATS-SR11-10 1 3/8 10
ATS-SR11-11 1 3/8 11
ATS-SR11-12 1 3/8 12
ATS-SR11-3 1 3/8 3
ATS-SR11-4 1 3/8 4
ATS-SR11-5 1 3/8 5
ATS-SR11-6 1 3/8 6
ATS-SR11-7 1 3/8 7
ATS-SR11-8 1 3/8 8
ATS-SR11-9 1 3/8 9
ATS-SR12-10 1 1/2 10
ATS-SR12-11 1 1/2 11
ATS-SR12-12 1 1/2 12
ATS-SR12-3 1 1/2 3
ATS-SR12-4 1 1/2 4
ATS-SR12-5 1 1/2 5
ATS-SR12-6 1 1/2 6
ATS-SR12-7 1 1/2 7
ATS-SR12-8 1 1/2 8
ATS-SR12-9 1 1/2 9
ATS-SR14-10 1 3/4 10
ATS-SR14-11 1 3/4 11
ATS-SR14-12 1 3/4 12
ATS-SR14-3 1 3/4 3
ATS-SR14-4 1 3/4 4
ATS-SR14-5 1 3/4 5
ATS-SR14-6 1 3/4 6
ATS-SR14-7 1 3/4 7
ATS-SR14-8 1 3/4 8
ATS-SR14-9 1 3/4 9
ATS-SR16-10 2 10
ATS-SR16-11 2 11
ATS-SR16-12 2 12
ATS-SR16-3 2 3
ATS-SR16-4 2 4
ATS-SR16-5 2 5
ATS-SR16-6 2 6
ATS-SR16-7 2 7
ATS-SR16-8 2 8
ATS-SR16-9 2 9
ATS-SR4-10 1/2 10
ATS-SR4-11 1/2 11
ATS-SR4-12 1/2 12
ATS-SR4-3 1/2 3
ATS-SR4-4 1/2 4
ATS-SR4-5 1/2 5
ATS-SR4-6 1/2 6
ATS-SR4-7 1/2 7
ATS-SR4-8 1/2 8
ATS-SR4-9 1/2 9
ATS-SR5-10 5/8 10
ATS-SR5-11 5/8 11
ATS-SR5-12 5/8 12
ATS-SR5-3 5/8 3
ATS-SR5-4 5/8 4
ATS-SR5-5 5/8 5
ATS-SR5-6 5/8 6
ATS-SR5-7 5/8 7
ATS-SR5-8 5/8 8
ATS-SR5-9 5/8 9
ATS-SR6-10 3/4 10
ATS-SR6-11 3/4 11
ATS-SR6-12 3/4 12
ATS-SR6-3 3/4 3
ATS-SR6-4 3/4 4
ATS-SR6-5 3/4 5
ATS-SR6-6 3/4 6
ATS-SR6-7 3/4 7
ATS-SR6-8 3/4 8
ATS-SR6-9 3/4 9
ATS-SR7-10 7/8 10
ATS-SR7-11 7/8 11
ATS-SR7-12 7/8 12
ATS-SR7-3 7/8 3
ATS-SR7-4 7/8 4
ATS-SR7-5 7/8 5
ATS-SR7-6 7/8 6
ATS-SR7-7 7/8 7
ATS-SR7-8 7/8 8
ATS-SR7-9 7/8 9
ATS-SR8-10 1 10
ATS-SR8-11 1 11
ATS-SR8-12 1 12
ATS-SR8-3 1 3
ATS-SR8-4 1 4
ATS-SR8-5 1 5
ATS-SR8-6 1 6
ATS-SR8-7 1 7
ATS-SR8-8 1 8
ATS-SR8-9 1 9
ATS-SR9-10 1 1/8 10
ATS-SR9-11 1 1/8 11
ATS-SR9-12 1 1/8 12
ATS-SR9-3 1 1/8 3
ATS-SR9-4 1 1/8 4
ATS-SR9-5 1 1/8 5
ATS-SR9-6 1 1/8 6
ATS-SR9-8 1 1/8 8

Load Tables

Steel Strong-Rod

Steel Strong-Rod
  1. Factored resistances shown are the lower of 13.2.(a)(i) and (iii), and 13.12.1.3 of CSA S16-19.
  2. Simpson Strong-Tie® Strong-Rod and standard all-thread rod are based on minimum Fy=43,000 psi and Fu=58,000 psi.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT