APVA 90° Angle
On This Page
Product Details
Outdoor Accents angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90° angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant Collection.
Key Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
Material
- APVA4, APVA6 — 12-gauge steel; APVA21 — 14-gauge steel
Finish
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
Options
- The APVA4 is designed for use with 4x or larger lumber
- The APVA6 is designed for use with 6x or larger lumber
- The APVA21 is designed for use with 2x or larger lumber
Related Links
- Wood Construction Connectors Technical and Installation Notes
- General Notes
- Explore the full Outdoor Accents product line
- Contact Simpson Strong-Tie
Catalog Pages
Related Literature
Load Tables
Heavy Angles
- Allowable loads have been increased for wind or earthquake loading with no further increase allowed. Reduce where other loads govern.
- Connector table loads and fastener quantities are listed for two parts. For single part installations, use half the listed values.
- All fasteners are Outdoor Accents® SDWS22312DBB structural wood screws inserted through an STN22 hex-head washer.
- Fasteners sold separately.
Light Rafter Tie
For SI: 1 inch = 25.4 mm; 1 lbf = 4.45 N.
- Allowable loads have been increased for wind or earthquake loading with no further increase allowed. Reduce where other loads govern.
- Allowable loads are for a single part.
- All fasteners are Outdoor Accents SD10112DBB connector screws.
- Fasteners sold separately.
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
