We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Rebar Cutter 

When hole placement conflicts with rebar or wire mesh, these bits enable the rebar to be removed so the hole can be drilled to the proper depth. Rebar cutters are separate from shanks. Shanks work with all sizes of rebar cutters. Overall length is approximately 15".


  • After drilling through the reinforcement or plate, remove debris from the hole and resume drilling with carbide tipped drill bit

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Diameter (in.) Drilling Depth Length (in.)
MCR05012 1/2 12 Appx. 15
MCR06212 5/8 12 Appx. 15
MCR07512 3/4 12 Appx. 15
MCR08712 7/8 12 Appx. 15
MCR10012 1 12 Appx. 15

Product Information Tables

Rebar Cutters
Dia. (in.) Drilling Depth (in.) Model No.
1/2 12 MCR05012
5/8 12 MCR06212
3/4 12 MCR07512
7/8 12 MCR08712
1 12 MCR10012

Code Reports & Compliance